On Tuesday 16 August 2011 07:13 PM, jean.pi...@newoldbits.com wrote:
From: Jean Pihet<j-pi...@ti.com>
Figures are added to the power domains structs.
Note: the figures are preliminary figures. More accurate measurements
are needed. Also the conditions of measurements shall be investigated
and described.
Tested on OMAP3 Beagleboard in RET/OFF using wake-up latency constraints
on MPU, CORE and PER.
Signed-off-by: Jean Pihet<j-pi...@ti.com>
---
arch/arm/mach-omap2/powerdomains3xxx_data.c | 77 +++++++++++++++++++++++++++
1 files changed, 77 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c
b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 469a920..64446e7 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -31,6 +31,13 @@
/*
* Powerdomains
+ *
+ * The wakeup_lat values are derived from measurements on
+ * the actual target.
+ *
+ * Note: the latency figures are preliminary and only used
+ * for the constraints framework validation.
+ * Actual figures and measurements conditions shall be added.
*/
static struct powerdomain iva2_pwrdm = {
@@ -52,6 +59,13 @@ static struct powerdomain iva2_pwrdm = {
[2] = PWRSTS_OFF_ON,
[3] = PWRSTS_ON,
},
+ .wakeup_lat = {
+ [PWRDM_FUNC_PWRST_OFF] = 1100,
+ [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
+ [PWRDM_FUNC_PWRST_CSWR] = 350,
+ [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
This can easily derived from the PWRST flag instead of hardcoding
it this way. Also note that INACTIVE PD isn't supported in mainline
yet because of voltage-domain dependency planned changes.
+ [PWRDM_FUNC_PWRST_ON] = 0,
All of the PD structures are manually coded. This whole file is
auto-generated and even these field generation needs to follow
that path.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html