When MPUSS hits off-mode e, L2 cache is lost. This patch adds L2X0
necessary maintenance operations and context restoration in the
low power code.
Signed-off-by: Santosh Shilimkar <santosh.shilim...@ti.com>
Cc: Kevin Hilman <khil...@ti.com>
---
arch/arm/mach-omap2/include/mach/omap-secure.h | 5 +
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 38 +++++++++-
arch/arm/mach-omap2/omap4-sar-layout.h | 4 +
arch/arm/mach-omap2/sleep44xx.S | 96 ++++++++++++++++++++++++
4 files changed, 142 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/include/mach/omap-secure.h
b/arch/arm/mach-omap2/include/mach/omap-secure.h
index 0062d49..6e929c5 100644
--- a/arch/arm/mach-omap2/include/mach/omap-secure.h
+++ b/arch/arm/mach-omap2/include/mach/omap-secure.h
@@ -37,8 +37,13 @@
/* Secure Monitor mode APIs */
#define OMAP4_MON_SCU_PWR_INDEX 0x108
+#define OMAP4_MON_L2X0_DBG_CTRL_INDEX 0x100
+#define OMAP4_MON_L2X0_CTRL_INDEX 0x102
+#define OMAP4_MON_L2X0_AUXCTRL_INDEX 0x109
+#define OMAP4_MON_L2X0_PREFETCH_INDEX 0x113
/* Secure PPA(Primary Protected Application) APIs */
+#define OMAP4_PPA_L2_POR_INDEX 0x23
#define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25
#ifndef __ASSEMBLER__
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 9f632fe..aea6deb 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -49,6 +49,7 @@
#include <asm/system.h>
#include <asm/pgalloc.h>
#include <asm/suspend.h>
+#include <asm/hardware/cache-l2x0.h>
#include <plat/omap44xx.h>
#include <mach/omap4-common.h>
@@ -63,10 +64,12 @@ struct omap4_cpu_pm_info {
struct powerdomain *pwrdm;
void __iomem *scu_sar_addr;
void __iomem *wkup_sar_addr;
+ void __iomem *l2x0_sar_addr;
};
static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
static struct powerdomain *mpuss_pd;
+static void __iomem *sar_base;
/*
* Program the wakeup routine address for the CPU0 and CPU1
@@ -135,6 +138,33 @@ static void scu_pwrst_prepare(unsigned int cpu_id,
unsigned int cpu_state)
__raw_writel(scu_pwr_st, pm_info->scu_sar_addr);
}
+/*
+ * Store the CPU cluster state for L2X0 low power operations.
+ */
+static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state)
+{
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id);
+
+ __raw_writel(save_state, pm_info->l2x0_sar_addr);
+}
+
+/*
+ * Save the L2X0 AUXCTRL and POR value to SAR memory. Its used to
+ * in every restore MPUSS OFF path.
+ */
+static void save_l2x0_context(void)
+{
+#ifdef CONFIG_CACHE_L2X0
+ u32 val;
+ void __iomem *l2x0_base = omap4_get_l2cache_base();
+
+ val = __raw_readl(l2x0_base + L2X0_AUX_CTRL);
+ __raw_writel(val, sar_base + L2X0_AUXCTRL_OFFSET);
+ val = __raw_readl(l2x0_base + L2X0_PREFETCH_CTRL);
+ __raw_writel(val, sar_base + L2X0_PREFETCH_CTRL_OFFSET);
+#endif
+}
+
/**
* omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
* The purpose of this function is to manage low power programming
@@ -182,6 +212,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int
power_state)
set_cpu_next_pwrst(cpu, power_state);
set_cpu_wakeup_addr(cpu, virt_to_phys(omap4_cpu_resume));
scu_pwrst_prepare(cpu, power_state);
+ l2x0_pwrst_prepare(cpu, save_state);
/*
* Call low level function with targeted CPU id
@@ -241,17 +272,19 @@ int omap4_hotplug_cpu(unsigned int cpu, unsigned int
power_state)
int __init omap4_mpuss_init(void)
{
struct omap4_cpu_pm_info *pm_info;
- void __iomem *sar_base = omap4_get_sar_ram_base();
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
return -ENODEV;
}
+ sar_base = omap4_get_sar_ram_base();
+
/* Initilaise per CPU PM information */
pm_info = &per_cpu(omap4_pm_info, 0x0);
pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU0 pwrdm\n");
@@ -267,6 +300,7 @@ int __init omap4_mpuss_init(void)
pm_info = &per_cpu(omap4_pm_info, 0x1);
pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
+ pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU1 pwrdm\n");
@@ -292,6 +326,8 @@ int __init omap4_mpuss_init(void)
else
__raw_writel(0, sar_base + OMAP_TYPE_OFFSET);
+ save_l2x0_context();
+
return 0;
}
diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h
b/arch/arm/mach-omap2/omap4-sar-layout.h
index aa14a8d..fe5b545 100644
--- a/arch/arm/mach-omap2/omap4-sar-layout.h
+++ b/arch/arm/mach-omap2/omap4-sar-layout.h
@@ -23,6 +23,10 @@
#define SCU_OFFSET0 0xd00
#define SCU_OFFSET1 0xd04
#define OMAP_TYPE_OFFSET 0xd10
+#define L2X0_SAVE_OFFSET0 0xd14
+#define L2X0_SAVE_OFFSET1 0xd18
+#define L2X0_AUXCTRL_OFFSET 0xd1c
+#define L2X0_PREFETCH_CTRL_OFFSET 0xd20
/* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
#define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 230ab8c..a7cce0b 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -32,6 +32,9 @@
ppa_zero_params:
.word 0x0
+ppa_por_params:
+ .word 1, 0
+
/*
* =============================
* == CPU suspend finisher ==
@@ -130,6 +133,55 @@ skip_scu_gp_set:
mcrne p15, 0, r0, c1, c0, 1
isb
dsb
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Clean and invalidate the L2 cache.
+ * Common cache-l2x0.c functions can't be used here since it
+ * uses spinlocks. We are out of coherency here with data cache
+ * disabled. The spinlock implementation uses exclusive load/store
+ * instruction which can fail without data cache being enabled.
+ * OMAP4 hardware doesn't support exclusive monitor which can
+ * overcome exclusive access issue. Because of this, CPU can
+ * lead to deadlock.
+ */
+l2x_clean_inv:
+ bl omap4_get_sar_ram_base
+ mov r8, r0
+ mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR
+ ands r5, r5, #0x0f
+ ldreq r0, [r8, #L2X0_SAVE_OFFSET0]
+ ldrne r0, [r8, #L2X0_SAVE_OFFSET1]
+ cmp r0, #3
+ bne do_WFI
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x03
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ DO_SMC
+#endif
+ bl omap4_get_l2cache_base
+ mov r2, r0
+ ldr r0, =0xffff
+ str r0, [r2, #L2X0_CLEAN_INV_WAY]
+wait:
+ ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
+ ldr r1, =0xffff
+ ands r0, r0, r1
+ bne wait
+#ifdef CONFIG_PL310_ERRATA_727915
+ mov r0, #0x00
+ mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
+ DO_SMC
+#endif
+l2x_sync:
+ bl omap4_get_l2cache_base
+ mov r2, r0
+ mov r0, #0x0
+ str r0, [r2, #L2X0_CACHE_SYNC]
+sync:
+ ldr r0, [r2, #L2X0_CACHE_SYNC]
+ ands r0, r0, #0x1
+ bne sync
+#endif
do_WFI:
bl omap_do_wfi
@@ -222,6 +274,50 @@ enable_smp_bit:
mcreq p15, 0, r0, c1, c0, 1
isb
skip_ns_smp_enable:
+#ifdef CONFIG_CACHE_L2X0
+ /*
+ * Restore the L2 AUXCTRL and enable the L2 cache.
+ * OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL
+ * OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL
+ * register r0 contains value to be programmed.
+ * L2 cache is already invalidate by ROM code as part
+ * of MPUSS OFF wakeup path.
+ */
+ ldr r2, =OMAP44XX_L2CACHE_BASE
+ ldr r0, [r2, #L2X0_CTRL]
+ and r0, #0x0f
+ cmp r0, #1
+ beq skip_l2en @ Skip if already enabled
+ ldr r3, =OMAP44XX_SAR_RAM_BASE
+ ldr r1, [r3, #OMAP_TYPE_OFFSET]
+ cmp r1, #0x1 @ Check for HS device
+ bne set_gp_por
+ ldr r0, =OMAP4_PPA_L2_POR_INDEX
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ adr r3, ppa_por_params
+ str r4, [r3, #0x04]
+ mov r1, #0x0 @ Process ID
+ mov r2, #0x4 @ Flag
+ mov r6, #0xff
+ mov r12, #0x00 @ Secure Service ID
+ DO_SMC
+ b set_aux_ctrl
+set_gp_por:
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
+ ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH
+ DO_SMC
+set_aux_ctrl:
+ ldr r1, =OMAP44XX_SAR_RAM_BASE
+ ldr r0, [r1, #L2X0_AUXCTRL_OFFSET]
+ ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL
+ DO_SMC
+ mov r0, #0x1
+ ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache
+ DO_SMC
+skip_l2en:
+#endif
b cpu_resume @ Jump to generic resume
ENDPROC(omap4_cpu_resume)
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
