On Thu, Sep 15, 2011 at 04:52:02PM +0530, Rajendra Nayak wrote: > .../devicetree/bindings/regulator/regulator.txt | 19 ++++++++++++ > drivers/of/of_regulator.c | 31 > ++++++++++++++++++++ > include/linux/of_regulator.h | 7 ++++ > 3 files changed, 57 insertions(+), 0 deletions(-)
Again, this should be part of the regulator API code not hidden away where it will only get reviewed by device tree people. > Required properties: > - compatible: Must be "regulator"; > +or > +- compatible: Must be "regulator-fixed"; /* For Fixed volatge regulator */ This seems at best confusing - the fixed voltage regulator is a particular regulator driver, and the general concept of a fixed voltage regulator is still a subset of regulators. > +# For fixed voltage regulators > +- supply-name: Name of the regulator supply > +- microvolts: Output voltage of regulator > +- gpio: gpio to use for enable control > +- startup-delay: startup time in microseconds > +- enable-high: Polarity of enable GPIO, 1 = Active High, 0 = Active low > +- enabled-at-boot: 1 = yes, 0 = no Much of this is specific to the Linux fixed voltage regulator driver rather than a generic regulator with a fixed voltage. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html