Some of the clocks are marked as autoidle, as they are handled by hardware.
Namely, core and per dplls are marked as such, and also sdrc_ick.
Per clkdomain manual transitions are also disabled, as this does not work,
and attempting to do so causes problems.
mpu_iva voltdm usecounts are also now handled within idle loop to allow
mpu_iva domain to transition smoothly.
After this patch, usecount numbers for core, per and mpu_iva domains
reach zero when domain is ready to idle (i.e. just before wfi.)
Signed-off-by: Tero Kristo <t-kri...@ti.com>
---
arch/arm/mach-omap2/clock3xxx_data.c | 3 +++
arch/arm/mach-omap2/clockdomains3xxx_data.c | 2 +-
arch/arm/mach-omap2/pm34xx.c | 8 ++++++++
3 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c
b/arch/arm/mach-omap2/clock3xxx_data.c
index dadb8c6..76c2a28 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -432,6 +432,7 @@ static struct clk dpll3_ck = {
.round_rate = &omap2_dpll_round_rate,
.clkdm_name = "dpll3_clkdm",
.recalc = &omap3_dpll_recalc,
+ .autoidle = 1,
};
/*
@@ -615,6 +616,7 @@ static struct clk dpll4_ck = {
.set_rate = &omap3_dpll4_set_rate,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap3_dpll_recalc,
+ .autoidle = 1,
};
/*
@@ -1744,6 +1746,7 @@ static struct clk sdrc_ick = {
.flags = ENABLE_ON_INIT,
.clkdm_name = "core_l3_clkdm",
.recalc = &followparent_recalc,
+ .autoidle = 1,
};
static struct clk gpmc_fck = {
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c
b/arch/arm/mach-omap2/clockdomains3xxx_data.c
index b84e138..d0cbeb4 100644
--- a/arch/arm/mach-omap2/clockdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c
@@ -282,7 +282,7 @@ static struct clockdomain usbhost_clkdm = {
static struct clockdomain per_clkdm = {
.name = "per_clkdm",
.pwrdm = { .name = "per_pwrdm" },
- .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .flags = CLKDM_CAN_HWSUP_SWSUP | CLKDM_NO_MANUAL_TRANSITIONS,
.dep_bit = OMAP3430_EN_PER_SHIFT,
.wkdep_srcs = per_wkdeps,
.sleepdep_srcs = per_sleepdeps,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 7255d9b..dc0d040 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -84,6 +84,7 @@ void (*omap3_do_wfi_sram)(void);
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
static struct powerdomain *cam_pwrdm;
+static struct voltagedomain *mpu_iva_voltdm;
static inline void omap3_per_save_context(void)
{
@@ -365,6 +366,8 @@ void omap_sram_idle(void)
}
pwrdm_pre_transition();
+ voltdm_pwrdm_disable(mpu_iva_voltdm);
+
/* NEON control */
if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
@@ -478,6 +481,8 @@ console_still_active:
omap3_disable_io_chain();
}
+ voltdm_pwrdm_enable(mpu_iva_voltdm);
+
pwrdm_post_transition();
clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
@@ -893,6 +898,9 @@ static int __init omap3_pm_init(void)
(void) clkdm_for_each(clkdms_setup, NULL);
+ mpu_iva_voltdm = voltdm_lookup("mpu_iva");
+ voltdm_pwrdm_enable(mpu_iva_voltdm);
+
mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
if (mpu_pwrdm == NULL) {
printk(KERN_ERR "Failed to get mpu_pwrdm\n");
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
