On Wed, May 2, 2012 at 4:20 PM, Koen Kooi <k...@dominion.thruhere.net> wrote: > > Op 2 mei 2012, om 12:38 heeft Raja, Govindraj het volgende geschreven: > >> On Wed, May 2, 2012 at 2:17 PM, Russ Dill <russ.d...@ti.com> wrote: >>> On Mon, Mar 19, 2012 at 6:34 AM, Raja, Govindraj <govindraj.r...@ti.com> >>> wrote: >>>> On Mon, Mar 19, 2012 at 12:12 PM, Keshava Munegowda >>>> <keshava_mgo...@ti.com> wrote: >>>>> From: Keshava Munegowda <keshava_mgo...@ti.com> >>>>> >>>>> It is observed that the echi ports of 3430 sdp board >>>>> are not working due to the random timing of programming >>>>> the associated GPIOs of the ULPI PHYs of the EHCI for reset. >>>>> If the PHYs are reset at during usbhs core driver, host ports will >>>>> not work because EHCI driver is loaded after the resetting PHYs. >>>>> The PHYs should be in reset state while initializing the EHCI >>>>> controller. >>>>> The code which does the GPIO pins associated with the PHYs >>>>> are programmed to reset is moved from the USB host core driver >>>>> to EHCI driver. >>>> >>>> I tested on beagle xm where gpio nreset is requested from >>>> board file. >>>> (Basic enumertaion after gpio nreset seems to work fine, >>>> Hub and smsc lan chip get detected afetr boot up) >>>> >>> >>> What base did you test this on top of? my xM is failing USB-wise when >>> I apply this on v3.3.3 (with the UART mux fix patch) and where it is >>> applied within master (3.4-rc4, again, with the UART mux fix patch). >>> Additionally, reverting this patch from 3.4-rc5 causes rc5 to work >>> properly. >>> >> >> Works for me be on 3.4-rc5 Beagle-XM even without reverting the patch >> >> Logs as in here [1]. > > From your log: > > [ 1.705291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 3.726593] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller > > Why is the ehci stuff taking more than 2 seconds?
phy reset operation in omap_ehci_soft_phy_reset failing and timing out. -- Thanks, Govindraj.R -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
