Use the new TFP410 platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
Cc: Mike Rapoport <m...@compulab.co.il>
Cc: Igor Grinberg <grinb...@compulab.co.il>
---
arch/arm/mach-omap2/board-cm-t35.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c
b/arch/arm/mach-omap2/board-cm-t35.c
index 1b34c96..4f23be0 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -294,20 +294,20 @@ static void __init cm_t35_init_display(void)
#define CM_T35_DVI_EN_GPIO 54
static struct tfp410_platform_data dvi_panel = {
+ .name = "dvi",
+ .source = "dpi.0",
+ .data_lines = 24,
.power_down_gpio = CM_T35_DVI_EN_GPIO,
.i2c_bus_num = -1,
};
-static struct omap_dss_device cm_t35_dvi_device = {
- .name = "dvi",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device cm_t35_dvi_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &dvi_panel,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
- &cm_t35_dvi_device,
&cm_t35_tv_device,
};
@@ -321,6 +321,8 @@ static void __init cm_t35_init_display(void)
{
int err;
+ platform_device_register(&cm_t35_dvi_device);
+
err = omap_display_init(&cm_t35_dss_data);
if (err)
pr_err("CM-T35: failed to register DSS device\n");
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
