Use the new generic-dpi-panel platform driver instead of the old
omap_dss_driver.
Signed-off-by: Tomi Valkeinen <tomi.valkei...@ti.com>
---
arch/arm/mach-omap2/board-am3517evm.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c
b/arch/arm/mach-omap2/board-am3517evm.c
index c545981..a7e728e 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -169,21 +169,21 @@ static void am3517_evm_panel_disable_lcd(struct
omap_dss_device *dssdev)
}
static struct panel_generic_dpi_data lcd_panel = {
+ .display_name = "lcd",
+ .source = "dpi.0",
.name = "sharp_lq",
+ .data_lines = 16,
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
};
-static struct omap_dss_device am3517_evm_lcd_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
- .name = "lcd",
- .driver_name = "generic_dpi_panel",
- .data = &lcd_panel,
- .phy.dpi.data_lines = 16,
+static struct platform_device am3517_evm_lcd_device = {
+ .name = "generic_dpi_panel",
+ .id = 0,
+ .dev.platform_data = &lcd_panel,
};
static struct omap_dss_device *am3517_evm_dss_devices[] = {
- &am3517_evm_lcd_device,
&am3517_evm_tv_device,
};
@@ -362,6 +362,9 @@ static void __init am3517_evm_init(void)
#if defined(CONFIG_MACH_OMAP3517EVM_EXPANSION_DVI)
platform_device_register(&am3517_evm_dvi_device);
#endif
+#if defined(CONFIG_MACH_OMAP3517EVM_EXPANSION_LCD)
+ platform_device_register(&am3517_evm_lcd_device);
+#endif
/* RTC - S35390A */
am3517_evm_rtc_init();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
