Add pinmux configurations for MII based CPSW ethernet to AM335x EVMsk. In this patch, only single named mode/state is added and these pins are configured during pinctrl driver initialization.
Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Todo: - if an idle state is available for pins, add support for it. Signed-off-by: Mugunthan V N <mugunthan...@ti.com> --- arch/arm/boot/dts/am335x-evmsk.dts | 50 ++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 4297899..4827486 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -51,6 +51,46 @@ 0x9c 0x27 /* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */ >; }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 0x2 /* mii1_txen.rgmii1_tctl, MODE2 | OUTPUT */ + 0x118 0x22 /* mii1_rxdv.rgmii1_rctl, MODE2 | INPUT_PULLDOWN */ + 0x11c 0x2 /* mii1_txd3.rgmii1_td3, MODE2 | OUTPUT */ + 0x120 0x2 /* mii1_txd2.rgmii1_td2, MODE2 | OUTPUT */ + 0x124 0x2 /* mii1_txd1.rgmii1_td1, MODE2 | OUTPUT */ + 0x128 0x2 /* mii1_txd0.rgmii1_td0, MODE2 | OUTPUT */ + 0x12c 0x2 /* mii1_txclk.rgmii1_tclk, MODE2 | OUTPUT */ + 0x130 0x22 /* mii1_rxclk.rgmii1_rclk, MODE2 | INPUT_PULLDOWN */ + 0x134 0x22 /* mii1_rxd3.rgmii1_rd3, MODE2 | INPUT_PULLDOWN */ + 0x138 0x22 /* mii1_rxd2.rgmii1_rd2, MODE2 | INPUT_PULLDOWN */ + 0x13c 0x22 /* mii1_rxd1.rgmii1_rd1, MODE2 | INPUT_PULLDOWN */ + 0x140 0x22 /* mii1_rxd0.rgmii1_rd0, MODE2 | INPUT_PULLDOWN */ + + /* Slave 2 */ + 0x40 0x2 /* gpmc_a0.rgmii2_tctl", MODE2 | OUTPUT */ + 0x44 0x22 /* gpmc_a1.rgmii2_rctl", MODE2 | INPUT_PULLDOWN */ + 0x48 0x2 /* gpmc_a2.rgmii2_td3", MODE2 | OUTPUT */ + 0x4c 0x2 /* gpmc_a3.rgmii2_td2", MODE2 | OUTPUT */ + 0x50 0x2 /* gpmc_a4.rgmii2_td1", MODE2 | OUTPUT */ + 0x54 0x2 /* gpmc_a5.rgmii2_td0", MODE2 | OUTPUT */ + 0x58 0x2 /* gpmc_a6.rgmii2_tclk", MODE2 | OUTPUT */ + 0x5c 0x22 /* gpmc_a7.rgmii2_rclk", MODE2 | INPUT_PULLDOWN */ + 0x60 0x22 /* gpmc_a8.rgmii2_rd3", MODE2 | INPUT_PULLDOWN */ + 0x64 0x22 /* gpmc_a9.rgmii2_rd2", MODE2 | INPUT_PULLDOWN */ + 0x68 0x22 /* gpmc_a10.rgmii2_rd1", MODE2 | INPUT_PULLDOWN */ + 0x6c 0x22 /* gpmc_a11.rgmii2_rd0", MODE2 | INPUT_PULLDOWN */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 0x30 /* mdio_data.mdio_data, MODE0 | INPUT_PULLUP */ + 0x14c 0x10 /* mdio_clk.mdio_clk, MODE0 | OUTPUT_PULLUP */ + >; + }; }; ocp { @@ -249,6 +289,16 @@ }; }; +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; +}; + &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; phy-mode = "rgmii-txid"; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html