Check if interrupts property exists and then only request irq.
On some boards INT line might not be connected to a valid
irq line on the application processor. Hence keeping a check
before requesting irq.
Boot tested on OMAP5-UEVM board.
Signed-off-by: J Keerthy <j-keer...@ti.com>
---
drivers/mfd/palmas.c | 12 +++++++++++-
1 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 62fa728..69c4e62 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -236,6 +236,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
{
struct palmas *palmas;
struct palmas_platform_data *pdata;
+ struct device_node *regnode = NULL;
struct device_node *node = i2c->dev.of_node;
int ret = 0, i;
unsigned int reg, addr;
@@ -262,7 +263,6 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, palmas);
palmas->dev = &i2c->dev;
palmas->id = id->driver_data;
- palmas->irq = i2c->irq;
for (i = 0; i < PALMAS_NUM_CLIENTS; i++) {
if (i == 0)
@@ -290,6 +290,15 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
}
}
+ regnode = of_parse_phandle(node, "interrupts", 0);
+
+ if (!regnode) {
+ dev_warn(palmas->dev, "IRQ missing: skipping irq request\n");
+ goto no_irq;
+ } else {
+ palmas->irq = i2c->irq;
+ }
+
/* Change interrupt line output polarity */
if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
reg = PALMAS_POLARITY_CTRL_INT_POLARITY;
@@ -316,6 +325,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
if (ret < 0)
goto err;
+no_irq:
slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE);
addr = PALMAS_BASE_TO_REG(PALMAS_PU_PD_OD_BASE,
PALMAS_PRIMARY_SECONDARY_PAD1);
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
