Hi Stephen, > -----Original Message----- > From: Stephen Warren [mailto:swar...@wwwdotorg.org] > Sent: Wednesday, June 19, 2013 12:42 AM > To: J, KEERTHY > Cc: linux-omap@vger.kernel.org; broo...@kernel.org; > ldewan...@nvidia.com; sa...@linux.intel.com; grant.lik...@secretlab.ca; > swar...@nvidia.com; linux-ker...@vger.kernel.org; linux- > d...@vger.kernel.org; g...@slimlogic.co.uk > Subject: Re: [PATCH v2 1/4] MFD: Palmas: Check if interrupts property > exists and then only request irq > > On 06/18/2013 11:33 AM, J, KEERTHY wrote: > > Stephen Warren wrote at Tuesday, June 18, 2013 10:53 PM: > ...>> No, you should just check the IRQ number. > > > > Hmmm...so something like (!i2c->irq) > > Yes.
Ok. > > >> Consider this: > >> > >> If the device was instantiated from a board file *or* a device tree, > >> i2c->irq is correctly set. Hence, checking that value works in both > >> cases. > >> > >> If you check the interrupts DT property, that will only work if the > >> device was instantiated from device tree, and not if it was > >> instantiated from a board file; the property will never exist in the > >> board file case, and hence you'll never be able to have a board file > >> provide an interrupt. > > > > The board file approach is getting deprecated for this. I Myself > > removed board file related pdata stuff in one of the patches. > > > > http://www.mail-archive.com/linux-omap@vger.kernel.org/msg90598.html > > > > So going the DeviceTree way. > > Even if you're 100% sure this driver will only ever work with DT (which > seems like a bad assumption to make no matter what the circumstance), > it'd still be best to detect whether an IRQ was specified in a generic > way. That way, nobody will read this driver, assume the code is > generic, and just copy/paste it without thinking. Ok. I understand. I will incorporate this. Thanks, Keerthy -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
