Hi Tony,
On 6/20/2013 1:45 AM, Tony Lindgren wrote:
Arnd & Olof,
* Benoit Cousson <b-cous...@ti.com> [130619 16:10]:
Hi Tony,
Please pull the following commits for OMAP Device Tree for v3.11.
It does contains as well 2 clock data patches, I hope it will not generate any
conflict with Paul's tree.
Special thanks to Florian for his nice cleanup using the C preprocessor.
It's best that Arnd and Olof take this pull request directly as we're
getting so close to the merge window. These patches should be pretty
much independent of the other branches I've sent, and are needed to
keep omap4 booting now that we've flipped the switch for omap4 to be
DT only.
Thanks and sorry for that. I was not expecting all these last minutes
series :-(
I'll stop accepting at -rc5 next time.
Regards,
Benoit
The following changes since commit 7d132055814ef17a6c7b69f342244c410a5e000f:
Linux 3.10-rc6 (2013-06-15 11:51:07 -1000)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git
for_3.11/dts
for you to fetch changes up to 153030c22defea2f96546d0f1a74fe954551c4cd:
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency (2013-06-19
16:59:28 -0500)
----------------------------------------------------------------
Afzal Mohammed (2):
ARM: dts: AM43x: Initial support
ARM: dts: AM43x EPOS EVM support
Dan Murphy (3):
ARM: dts: omap4-panda: Update the LED support for the panda
ARM: dts: omap4-panda: Update the twl6040 gpio to macro definition
ARM: dts: omap5-uevm: Add LED support for uEVM blue LED
Eduardo Valentin (3):
ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices
ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices
ARM: dts: OMAP5: Add bandgap DT entry
Florian Vaussard (15):
ARM: dts: OMAP2+: Use #include for all device trees
ARM: dts: OMAP2+: Use existing constants for GPIOs
ARM: dts: OMAP4/5: Use existing constants for IRQs
ARM: dts: OMAP2+: Header file for pinctrl constants
ARM: dts: OMAP2+: Use pinctrl constants
ARM: dts: AM3XXX: Use #include for all device trees
ARM: dts: AM33XX: Use existing constants for GPIOs
ARM: dts: AM33XX: Specific pinctrl header
ARM: dts: AM33XX: Use pinctrl constants
ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs target
ARM: dts: Protect pinctrl headers against multiple inclusions
ARM: dts: OMAP3: Include IRQ header
ARM: dts: omap3-tobi: Add SMSC911X node
ARM: dts: omap3-tobi: Correct polarity for GPIO LED
ARM: dts: omap3-overo: Add default trigger for TWL4030 LED
J Keerthy (1):
ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes
Javier Martinez Canillas (3):
ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support
ARM: dts: omap3-igep0020: Add NAND flash support
ARM: dts: omap3-igep0030: Add NAND flash support
Kevin Hilman (3):
ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeup
ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeup
ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line
Mugunthan V N (3):
ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
Philip Avinash (4):
ARM: dts: AM33XX: Add NAND flash device tree data to am335x-evm
ARM: dts: AM33XX: Add PWMSS device tree nodes
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm
ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk
Philip, Avinash (1):
ARM: dts: AM33XX: Add ELM node
Roger Quadros (4):
ARM: dts: omap5-uevm: Add USB Host support
ARM: dts: omap4-panda: Add USB Host support
ARM: dts: omap4-panda: Fix DVI EDID reads
ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
Sourav Poddar (1):
ARM: dts: omap5-uevm: Add uart pinctrl data
Sricharan R (1):
ARM: dts: omap5: Make uevm as the official board and deprecate sevm
support
Suman Anna (1):
ARM: dts: OMAP4+: Remove multimedia carveouts
Vaibhav Hiremath (7):
ARM: dts: AM33XX: Add default pinctrl binding for I2C device
ARM: dts: AM33XX: Add pinctrl binding to gpio-leds node
ARM: dts: AM33XX: Fix uart numbering to match hardware/TRM
ARM: dts: AM33XX: Add default pinctrl binding for UART0 device
ARM: dts: AM33XX: Set pinmux for clkout2 pad used for clock output
ARM: AM33XX: clock: Add debugSS clock nodes
ARM: AM33XX: clock data: Enable clkout2 as part of init
.../devicetree/bindings/arm/omap/omap.txt | 3 +
arch/arm/boot/dts/Makefile | 8 +-
arch/arm/boot/dts/am335x-bone.dts | 118 ++++-
arch/arm/boot/dts/am335x-evm.dts | 264 ++++++++++-
arch/arm/boot/dts/am335x-evmsk.dts | 184 +++++++-
arch/arm/boot/dts/am33xx.dtsi | 121 ++++-
arch/arm/boot/dts/am3517-evm.dts | 2 +-
arch/arm/boot/dts/am3517_mt_ventoux.dts | 2 +-
arch/arm/boot/dts/am4372.dtsi | 68 +++
arch/arm/boot/dts/am43x-epos-evm.dts | 18 +
arch/arm/boot/dts/omap2.dtsi | 5 +-
arch/arm/boot/dts/omap2420-h4.dts | 2 +-
arch/arm/boot/dts/omap2420.dtsi | 2 +-
arch/arm/boot/dts/omap2430.dtsi | 2 +-
arch/arm/boot/dts/omap3-beagle-xm.dts | 48 +-
arch/arm/boot/dts/omap3-beagle.dts | 72 ++-
arch/arm/boot/dts/omap3-devkit8000.dts | 11 +-
arch/arm/boot/dts/omap3-evm.dts | 7 +-
arch/arm/boot/dts/omap3-igep.dtsi | 43 +-
arch/arm/boot/dts/omap3-igep0020.dts | 111 ++++-
arch/arm/boot/dts/omap3-igep0030.dts | 60 ++-
arch/arm/boot/dts/omap3-overo.dtsi | 20 +-
arch/arm/boot/dts/omap3-tobi.dts | 52 ++-
arch/arm/boot/dts/omap3.dtsi | 6 +-
arch/arm/boot/dts/omap3430-sdp.dts | 5 +-
arch/arm/boot/dts/omap34xx.dtsi | 2 +-
arch/arm/boot/dts/omap36xx.dtsi | 2 +-
arch/arm/boot/dts/omap4-panda-a4.dts | 10 +-
arch/arm/boot/dts/omap4-panda-common.dtsi | 162 +++++--
arch/arm/boot/dts/omap4-panda-es.dts | 38 +-
arch/arm/boot/dts/omap4-panda.dts | 4 +-
arch/arm/boot/dts/omap4-sdp-es23plus.dts | 8 +-
arch/arm/boot/dts/omap4-sdp.dts | 126 ++---
arch/arm/boot/dts/omap4-var-som.dts | 8 +-
arch/arm/boot/dts/omap4.dtsi | 124 +++--
arch/arm/boot/dts/omap443x.dtsi | 8 +-
arch/arm/boot/dts/omap4460.dtsi | 15 +-
arch/arm/boot/dts/omap5-evm.dts | 261 -----------
arch/arm/boot/dts/omap5-uevm.dts | 485 ++++++++++++++++++++
arch/arm/boot/dts/omap5.dtsi | 173 ++++---
arch/arm/boot/dts/twl4030_omap3.dtsi | 25 +
arch/arm/mach-omap2/cclock33xx_data.c | 49 +-
include/dt-bindings/pinctrl/am33xx.h | 42 ++
include/dt-bindings/pinctrl/omap.h | 55 +++
44 files changed, 2172 insertions(+), 659 deletions(-)
create mode 100644 arch/arm/boot/dts/am4372.dtsi
create mode 100644 arch/arm/boot/dts/am43x-epos-evm.dts
delete mode 100644 arch/arm/boot/dts/omap5-evm.dts
create mode 100644 arch/arm/boot/dts/omap5-uevm.dts
create mode 100644 arch/arm/boot/dts/twl4030_omap3.dtsi
create mode 100644 include/dt-bindings/pinctrl/am33xx.h
create mode 100644 include/dt-bindings/pinctrl/omap.h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
