Chris, Odd output indeed. If your CPU appears to be ok, then have you tried restarting all OMSA services?
/opt/dell/srvadmin/sbin/srvadmin-services.sh restart I am running XenServer 6.5 as well, though using OMSA v8.1 and do not see what you are seeing. Jose De la Rosa Linux Engineering Dell | Enterprise Solutions Group -----Original Message----- From: linux-poweredge-bounces-Lists On Behalf Of Chris Lajoie Sent: Monday, February 01, 2016 1:26 PM To: linux-poweredge-Lists Subject: [Linux-PowerEdge] 2nd CPU status is Unknown Hi, I have a PowerEdge R720 in which I have just installed a 2nd CPU. I am running XenServer 6.5 on it, and I have the OpenManage 7.4 tools installed. I ran the following: # omreport chassis processors Processors Information Health : Ok Index : 0 Status : Ok Connector Name : CPU1 Processor Brand : Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz Processor Version : Model 45 Stepping 7 Current Speed : 2200 MHz State : Present Core Count : 8 Index : 1 Status : Unknown Connector Name : CPU2 Processor Brand : Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz Processor Version : Model 45 Stepping 7 Current Speed : 2200 MHz State : Unknown Core Count : 8 As you can see, CPU 0 is fine, but CPU 1 shows a status of Unknown and state of Unknown. I should also note that the CPU appears to work fine. I started a VM configured to use all 32 cores (16 not counting hyperthreading) and everything works fine, and I can watch the OS using all of the cores, so I know code is executing on it. Any idea what's going on here? Chris _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
