On 04/29/2016 11:58 AM, Stephen Berg (Contractor) wrote: > Just reinstalled four M610 blades with SL7.2. Unlike recent reinstalls > I've done I did NOT update the iDRAC firmware to 3.80, it's still at 3.75. > > After installation I installed OMSA 8.2 and everything worked. I then > updated OMSA to 8.3 and all the OMSA services still work. On the blades > and rack servers that I've done recently running dsu was always the > first step and pretty much every system had the updated iDRAC firmware > 3.80 installed. > > So that is a pretty clear indication that OMSA 8.3 and iDRAC firmware > 3.80 are not cooperating with each other. > Just upgraded an M630 and ran into the same situation. If the iDRAC is upgraded OMSA 8.3 will not start properly. Reverting to OMSA 8.2 and that works as expected.
-- Stephen Berg Systems Administrator NRL Code: 7320 Office: 228-688-5738 stephen.berg....@nrlssc.navy.mil _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge