I am just interested in how I can force an irq and i/o in the lilo.conf
file. I did it for a network card.
Lorenz Glaza
Transamerica Life Companies
Special Studies/ALM
213-742-5049
[EMAIL PROTECTED]
http://lo-lands.ml.org
> -----Original Message-----
> From: (Chris Mauritz) [SMTP:[EMAIL PROTECTED]]
> Sent: Thursday, December 17, 1998 11:48 AM
> To: Glaza, Lorenz
> Cc: [EMAIL PROTECTED]
> Subject: Re: multiple scsi with raid
>
> > From [EMAIL PROTECTED] Thu Dec 17 13:37:24
> 1998
> >
> > I know this may be more of a hardware question than a specific RAID
> > question, but here goes. I just got a DPT RAID controller, but my
> > motherboard has a built-in scsi controller. So I have two scsi
> > controllers. My problem is that I have a resource conflict between
> the
> > RAID card and the on-board scsi card. Does anyone know how to
> resolve
> > this. The board is made by intel and the scsi card is an adaptec
> > aix7880 or something like that. On boot, the adaptec card is seen,
> but
> > the DPT card is passed over because it has been assigned the same
> > resources. Linux is recognizing the DPT card but skipping for the
> above
> > reason. Can I do an append in the lilo.conf file to force it?
> > Thanks,
>
> You should be able to disable the integrated SCSI controller from the
> motherboard BIOS configuration utility (usually by hitting DEL at boot
> time).
>
> Chris
>
> ---
> Christopher Mauritz
> [EMAIL PROTECTED]
