Hi,
I'm currently trying to set up a system with root partition on /dev/md0.
The machine should become a mailserver, so there's lots of space for
/var/spool...
/dev/md0 1523126 185087 1259326 13% /
/dev/md1 6960272 1052 6598564 0% /var
/dev/sda1 7746 599 6747 8% /kernel0
/dev/sdb1 7746 600 6746 8% /kernel1
I've put the kernel image + stuff needed by lilo (/vmlinuz /dev/*
/etc/lilo.conf /boot/* /tmp) into a small partition on each of the disks so
I can run lilo -r /kernel0 and lilo -r /kernel1 to have both disks bootable
in case the other sould die;
I'm not too happy with this double-lilo setup I'm currently using - is
there any way to make the boot process more transparent while still
retaining the ability to start from either drive?
Bye, Martin Bene
--------------------------------------------------
Martin Bene vox: +43-664-3251047
simon media fax: +43-316-813824-6
Andreas-Hofer-Platz 9 e-mail: [EMAIL PROTECTED]
8010 Graz, Austria
--------------------------------------------------
finger [EMAIL PROTECTED] for PGP public key