is your system redhat 5.2? if so, do:
rpm -e raidtools
and edit /etc/rc.d/rc.sysinit and remove the section on starting raid
(about 30 lines, do :/raid to find it in vi)
then edit /etc/rc.d/init.d/halt, and remove the lines about raid (about
4lines)
then go back to your raid tools dir, and do a make install again.
al
"so don't tell us it can't be done, putting down what you don't know.
money isn't our god, integrity will free our souls" - Max Cavalera
On Sun, 28 Feb 1999, Stephen Denny wrote:
> I have 2.2.1 installed with what I thought were the updated
> libraries etc. Its been running for a couple of week without
> raid.
>
> I'm attempting raid 5 on some disks and installed
>
> raid0145-19990128-2.2.0 as well as
> raidtools-19990128-0.90.tar.gz.
>
> Built a new kernel, modules etc, autodetect raid. Have a
> raidtab, did a mkraid /dev/md0.
>
> Upon booting, I get this message three times:
>
> raidadd(pid30) used obsolete MD ioctl, upgrade your software to use new ictls.
>
> What software should I be upgrading?
>
> Stephen Denny mailto:[EMAIL PROTECTED]
> Hex.Net Superhighway http://www.hex.net
>
>
