> Hello all,
> We are planning on using RAID-1 to mirror two identical drives.
> The drives are set up the same in bios, CHS mode with 25228
> cylinders, 16 heads, ande 63 sectors each. Linux sees them and shows
> the same setup as the bios. Linux fdisk on the other hand, shows
> different setups for the drives. One(hdb) has 1582 cylinders and 255
> heads, while the other(hdc) has 25228 cylinders and 16 heads. We
> were wondering if this was a problem that would be preventative to
> implementing RAID-1 mirroring, and if so how we can set things right.
I know this may be something you've already looked at but check to see if
LBA mode is turned on or off in the bios.
-sv