Sounds like the same problem I had using the default rh6.0 kernel. While 
it autodetects raid it doesn't have the raid modules compiled in. To
keep everything uniform in my cluster, i simply created a new initrd
that loads the raid1 module and it proceds to boot fine with root on a
raid1 partition.

-kevin

On Fri, 28 May 1999, Rlas Kotowski wrote:

>       Hi,
> 
> I just installed Raid Level-1, it seems to run fine, I can start it, mount
> it, transfer files, etc..
> 
> however, the riad gets autodetected, started and the STOPPED at boot time,
> after the entire boot process is over and I'm logged in I can start and
> mount it manually, but for whatever I try it won't be mounted at boot
> time, here is the the log of the message:
> 
> ay 28 14:44:41 narixa kernel: autorun ... 
> May 28 14:44:41 narixa kernel: considering sdb3 ... 
> May 28 14:44:41 narixa kernel:   adding sdb3 ... 
> May 28 14:44:41 narixa kernel:   adding sda3 ... 
> May 28 14:44:41 narixa kernel: created md0 
> May 28 14:44:41 narixa kernel: bind<sda3,1> 
> May 28 14:44:41 narixa kernel: bind<sdb3,2> 
> May 28 14:44:41 narixa kernel: running: <sdb3><sda3> 
> May 28 14:44:41 narixa kernel: now! 
> May 28 14:44:41 narixa kernel: sdb3's event counter: 00000002 
> May 28 14:44:41 narixa kernel: sda3's event counter: 00000002 
> May 28 14:44:41 narixa kernel: kmod: failed to exec /sbin/modprobe -s -k
> md-personality-3, errno = 2 
> May 28 14:44:41 narixa kernel: do_md_run() returned -22 
> May 28 14:44:41 narixa kernel: unbind<sdb3,1> 
> May 28 14:44:41 narixa kernel: export_rdev(sdb3) 
> May 28 14:44:41 narixa kernel: unbind<sda3,0> 
> May 28 14:44:41 narixa kernel: export_rdev(sda3) 
> May 28 14:44:41 narixa kernel: md0 stopped. 
> May 28 14:44:41 narixa kernel: ... autorun DONE.              
> 
> 
> I'm very frustrated since I can't figure this out, any help would be
> apreciated, thank you very much in advance.
> 
> Ralf R. Kotowski
> 
> 

-- 
-------------------------------------------------------------
Kevin Hill  http://www.vnetwork.com/khill  [EMAIL PROTECTED]
"Just because I don't Care doesn't mean I don't Understand!"
      --Homer Simpson
-------------------------------------------------------------

Reply via email to