On Fri, 28 May 1999, Rlas Kotowski wrote:
hi,
> I just installed Raid Level-1, it seems to run fine, I can start it, mount
> it, transfer files, etc..
>
> however, the riad gets autodetected, started and the STOPPED at boot time,
> after the entire boot process is over and I'm logged in I can start and
> mount it manually, but for whatever I try it won't be mounted at boot
> time, here is the the log of the message:
>
> ay 28 14:44:41 narixa kernel: autorun ...
> May 28 14:44:41 narixa kernel: considering sdb3 ...
> May 28 14:44:41 narixa kernel: adding sdb3 ...
> May 28 14:44:41 narixa kernel: adding sda3 ...
> May 28 14:44:41 narixa kernel: created md0
> May 28 14:44:41 narixa kernel: bind<sda3,1>
> May 28 14:44:41 narixa kernel: bind<sdb3,2>
> May 28 14:44:41 narixa kernel: running: <sdb3><sda3>
> May 28 14:44:41 narixa kernel: now!
> May 28 14:44:41 narixa kernel: sdb3's event counter: 00000002
> May 28 14:44:41 narixa kernel: sda3's event counter: 00000002
> May 28 14:44:41 narixa kernel: kmod: failed to exec /sbin/modprobe -s -k
> md-personality-3, errno = 2
> May 28 14:44:41 narixa kernel: do_md_run() returned -22
> May 28 14:44:41 narixa kernel: unbind<sdb3,1>
> May 28 14:44:41 narixa kernel: export_rdev(sdb3)
> May 28 14:44:41 narixa kernel: unbind<sda3,0>
> May 28 14:44:41 narixa kernel: export_rdev(sda3)
> May 28 14:44:41 narixa kernel: md0 stopped.
> May 28 14:44:41 narixa kernel: ... autorun DONE.
>
>
> I'm very frustrated since I can't figure this out, any help would be
> apreciated, thank you very much in advance.
It seems you're having problems with modules, if you have raid
support compiled as a module, you'll have to either compile it into the
kernel or use an raid1 capable initrd image.
You don't mention any versions: kernel? raidtools? raidpatch?
greetings,
*****---(*)---**********************************************---------->
Francisco J. Montilla Systems & Network administrator
[EMAIL PROTECTED] irc: pukka Seville Spain
INSFLUG (LiNUX) Coordinator. www.insflug.org - ftp.insflug.org