What drives are you using ?
Some drives cause it to hang.
Also it depends if your using an inbuilt or addon card.
Old motherboards dont support a 3rd and 4th ide channel (BIOS limitation?)
As far as i know your looking in the right place for the patch
I have an Abit hpt366 card, it works
----- Original Message -----
From: Robert <[EMAIL PROTECTED]>
To: Andre Hedrick <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Sunday, October 31, 1999 11:52 PM
Subject: Web site on IDE patch status
> Andre, as you may remember from a prior email, I am anxious to get my
> HPT366 controller chipset working. At present I am using 2.2.12 with
> patches: ide.2.2.12.19991014.patch & raid0145-19990824-2.2.11. The system
> fails to boot when a drive is connected to either IDE3 or IDE4. In my
> case, it's more important to me that I can use the 3rd and 4th channels,
> than whether they run at 33 or 66. And of course I would be happy to
> supply additional information to you at any time. But I know you must be
> a busy guy.
>
> Anyway here is my question:
>
> Do you have a web site where I check in from time to time, to see the
> current status of your efforts and the latest patches and what they
> address: Here is the web address I am using at the moment, is there a
> better one? ftp://ftp.us.kernel.org/pub/linux/kernel/people/hedrick/
>
> Best Regards,
> Robert Laughlin
>
>
> On Sat, 30 Oct 1999, Andre Hedrick wrote:
> > Hacking is easy........Doing it correct is pain.
>
>
>
