You MUST apply the 2.2.11 raid patch before raidtools 0.90 will work with
the kernel properly.
Answer N to the errors
At 08:13 PM 1/8/00 +0200, Antanas Masevicius wrote:
>Hello there,
>
>I face'd the promblem:
>
># mkraid /dev/md0
>handling MD device /dev/md0
>analyzing super-block
>disk 0: /dev/hdc1, 8032kB, raid superblock at 7936kB
>disk 1: /dev/hdd2, 8032kB, raid superblock at 7936kB
>mkraid: aborted, see the syslog and /proc/mdstat for potential clues.
>
>and syslog shows nothing.
>
>/proc/mdstat contains:
>Personalities : [3 raid1]
>read_ahead not set
>md0 : inactive
>md1 : inactive
>md2 : inactive
>md3 : inactive
>
>as it has to before the md0 creation.
>
>raidtools: raidtools-0.90
>i'm using linux-2.2.14 kernel version. ( any patch for this kernel ?)
>Debian 2.2 glibc 2.1
>also tested on Debian 2.1 glibc2
>
>i've tried diferent sets of HD's and diferent sets of partitions. Nothing
>helps.
>
>Any suggestions ?
>
>thanx
>
>====================================================================
>
>Antanas Masevicius Kaunas University of Technology
>Studentu 48a-101 Computer Center
>LT-3028 Kaunas LITNET NOC UNIX Systems Administrator
>Lithuania E-mail: [EMAIL PROTECTED]
>
===========================================================
David Cooley N5XMT Internet: [EMAIL PROTECTED]
Packet: N5XMT@KQ4LO.#INT.NC.USA.NA T.A.P.R. Member #7068
We are Borg... Prepare to be assimilated!
===========================================================
