Hi
I have a similar problem.....
/dev/md1 consists of /dev/hda5 and /dev/hdb5
When running LILO only /dev/hdb is updated.
Should /dev/hdb fail, I cannot boot from /dev/hda and get a message that
no valid boot disk was found.
I have tried installing a new /dev/hda, fdisk'd and raidhotadd'd the
drive.
After array resonstruction I ran LILO again with the same result.
Anyone have any ideas ?.
Regards
John
On Tue, 23 May 2000, Thomas Scheuermann wrote:
> Hello,
>
> I have some recovery problems with RAID1.
> (raidtools 0.90)
> I use Red Hat Linux 6.1 and I have two partitions mirrored (hda8 and hdc8).
> If I loose the second part of the mirror I don't have any problems.
> I can recreate the RAID1 with raidhotadd /dev/md0 /dev/hdc8.
> But if I loose the first mirror Red Hat Linux fails to boot because
> of an invalid RAID configuration.
> Does anybody know that problem and has maybe a solution ?
>
> Thanks
> Thomas
>
> --
> Thomas Scheuermann Software Design Engineer
> BARCO Control Rooms Dr. Seufert GmbH
>
> [EMAIL PROTECTED]
>
