On Wed, 24 May 2000, octave klaba wrote:
> scsi : aborting command due to timeout : pid 13116637, scsi0, channel 0, id 0, lun 0
>Write (10) 00 00 dc 04 59 00 00 08 00
> scsi : aborting command due to timeout : pid 13116638, scsi0, channel 0, id 1, lun 0
>Write (10) 00 01 20 04 99 00 00 08 00
> scsi : aborting command due to timeout : pid 13116640, scsi0, channel 0, id 1, lun 0
>Write (10) 00 01 24 03 a1 00 00 08 00
> scsi : aborting command due to timeout : pid 13116641, scsi0, channel 0, id 0, lun 0
>Write (10) 00 01 20 04 99 00 00 08 00
> scsi : aborting command due to timeout : pid 13116642, scsi0, channel 0, id 1, lun 0
>Write (10) 00 01 30 04 31 00 00 08 00
> scsi : aborting command due to timeout : pid 13116643, scsi0, channel 0, id 0, lun 0
>Write (10) 00 01 24 03 a1 00 00 08 00
> SCSI host 0 abort (pid 13116609) timed out - resetting
> SCSI bus is being reset for host 0 channel 0.
> (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
> (scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31.
Well, I had similar errors when the Adaptec chip (integrated on the
motheboard) was overheating. Improving the air flow in the whole rack
enclosure and adding a passive heatsink on the chip helped a lot.
D.
