Hi all,
Just received an old Topspin 2 port PCIe card (MTLP25208-C), using
firmware 4.6.0 and thought I'd update it to the latest firmware before
trying to do anything with it.
However, the board id is being reported really strangely:
$ sudo mstflint -d mthca0 q
Image type: Failsafe
I.S. Version: 1
Chip Revision: A0
Description: Node Port1 Port2
Sys image
GUIDs: 0005ad00000467fc 0005ad00000467fd 0005ad00000467fe
0005ad00000467ff
Board ID: q��
VSD: q��
PSID:
$
Does anyone know what that's about?
Was considering the firmware on the board may be stuffed, but it seems
to be verifying ok:
$ sudo mstflint -d mthca0 v
Failsafe image:
Invariant /0x00000028-0x0000095f (0x000938)/ (BOOT2) - OK
Primary Image /0x00010000-0x00010107 (0x000108)/ (Pointer Sector)- OK
/0x00030028-0x000308af (0x000888)/ (BOOT2) - OK
/0x000308b0-0x000348df (0x004030)/ (BOOT2) - OK
/0x000348e0-0x00036bd3 (0x0022f4)/ (Configuration) - OK
/0x00036bd4-0x00036c07 (0x000034)/ (GUID) - OK
/0x00036c08-0x0004452f (0x00d928)/ (DDR) - OK
/0x00044530-0x0004c97b (0x00844c)/ (DDR) - OK
/0x0004c97c-0x000617a3 (0x014e28)/ (DDR) - OK
/0x000617a4-0x00074813 (0x013070)/ (DDR) - OK
/0x00074814-0x00077883 (0x003070)/ (DDR) - OK
/0x00077884-0x00078f37 (0x0016b4)/ (DDR) - OK
/0x00078f38-0x00078f4b (0x000014)/ (Configuration) - OK
/0x00078f4c-0x00078f8f (0x000044)/ (Jump addresses) - OK
/0x00078f90-0x00082bf3 (0x009c64)/ (EMT Service) - OK
Secondary Image /0x00020000-0x00020107 (0x000108)/ (Pointer Sector)- OK
/0x00090028-0x000908af (0x000888)/ (BOOT2) - OK
/0x000908b0-0x000948df (0x004030)/ (BOOT2) - OK
/0x000948e0-0x00096bd3 (0x0022f4)/ (Configuration) - OK
/0x00096bd4-0x00096c07 (0x000034)/ (GUID) - OK
/0x00096c08-0x000a452f (0x00d928)/ (DDR) - OK
/0x000a4530-0x000ac97b (0x00844c)/ (DDR) - OK
/0x000ac97c-0x000c17a3 (0x014e28)/ (DDR) - OK
/0x000c17a4-0x000d4813 (0x013070)/ (DDR) - OK
/0x000d4814-0x000d7883 (0x003070)/ (DDR) - OK
/0x000d7884-0x000d8f37 (0x0016b4)/ (DDR) - OK
/0x000d8f38-0x000d8f4b (0x000014)/ (Configuration) - OK
/0x000d8f4c-0x000d8f8f (0x000044)/ (Jump addresses) - OK
/0x000d8f90-0x000e2bf3 (0x009c64)/ (EMT Service) - OK
FW image verification succeeded. Image is bootable.
$
*********************
This is interesting too (hopefully the correct firmware image). Not
that it's not extracting a correct firmware version number?
$ sudo mstflint -d mthca0 -i fw-25208-4_8_200-MHEL-CF128-T.bin -nofs b
Current FW version on flash: N/A
New FW version: N/A
Burn process will not be failsafe. No checks will be performed.
ALL flash, including the Invariant Sector will be overwritten.
If this process fails, computer may remain in an inoperable state.
Do you want to continue ? (y/n) [n] : n
$
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
