On Fri, Aug 27, 2010 at 4:45 PM, Sufficool, Stanley <ssuffic...@rov.sbcounty.gov> wrote: > > >>-----Original Message----- >>From: ofw-boun...@lists.openfabrics.org >>[mailto:ofw-boun...@lists.openfabrics.org] On Behalf Of Chris Worley >>Sent: Friday, August 27, 2010 1:52 PM >>To: o...@lists.openfabrics.org; OFED mailing list >>Subject: [ofw] What is an IOC device ID and what is DriverStore >> >> >>In scouring the many manuals with the Window's IB drivers I >>found a clue as to why I can't get SRP working in WinOF: >> >> Windows PNP (Plug-n-Play) will match the IOC device ID with >>DriverStore installed drives and then will load the IBiou.sys driver >> >>How do I set the "IOC device ID" and what is DriverStore? > > Not sure what this is, but I have never had to set any values on the OFED-W > initiator. > >> >>I can make the Windows SRP miniport devices appear and >>disappear by removing/reloading ib_srpt on the target (at >>least with the 2.1.1 driver from Mellanox; the latest at >>openfabrics.org panics the WS2008R2 system when ib_srpt is rmmod'ed). >> >>Beyond that, Windows never sees the drives... Linux initiators >>don't have an issue. > > What messages do you get on the target? It it even receiving the request?
Yes: ib_srpt: ***ERROR***: received unrecognized IB CM event 10 ib_srpt: Received DREQ and sent DREP for session 0x00247100000002c100247100000003d8. ib_srpt: Received SRP_LOGIN_REQ with i_port_id 0x247100000002c1:0x247100000003d8, t_port_id 0x247100000002c1:0x247100000002c1 and it_iu_len 4148 on port 1 (guid=0xfe80000000000000:0x247100000002bf) ib_srpt: disconnected session 0x00247100000002c100247100000003d8 because a new SRP_LOGIN_REQ has been received. ib_srpt: Session : kernel thread ib_srpt_compl (PID 31542) started scst: Using security group "Default" for initiator "0x00247100000002c100247100000003d8" > > Does windows disk management show a broken LUN? No. Nothing (except local drives). > >> >>Someone throw me a bone! The SRP initiator seems to have been >>broken for many months on WinDoh's. > > I have had no problems with the SRP initiator as long as I start the target > _after_ the windows systems boot. I've tried five different revs of the Windows driver, and no drives are seen. Thanks, Chris > >> >>Thanks, >> >>Chris >>_______________________________________________ >>ofw mailing list >>o...@lists.openfabrics.org >>http://lists.openfabrics.org/cgi-bin/mailman/listinfo/ofw >> > -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html