Add properties as per new bindings in zynqmp remoteproc node to represent TCM address and size. This patch configures RPU in split mode and adds TCM information accordingly.
Signed-off-by: Tanmay Shah <[email protected]> --- arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 28 ++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index b61fc99cd911..01e12894c88e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -247,19 +247,35 @@ fpga_full: fpga-full { ranges; }; - remoteproc { + remoteproc@ffe00000 { compatible = "xlnx,zynqmp-r5fss"; - xlnx,cluster-mode = <1>; + xlnx,cluster-mode = <0>; - r5f-0 { + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>, + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>; + + r5f@0 { compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware PD_RPU_0>; + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>; + reg-names = "atcm", "btcm"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>; memory-region = <&rproc_0_fw_image>; }; - r5f-1 { + r5f@1 { compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware PD_RPU_1>; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm", "btcm"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; memory-region = <&rproc_1_fw_image>; }; }; -- 2.25.1
