On 03/15/2016 10:48 AM, Ramesh Shanmugasundaram wrote:
> This patch adds support for the CAN FD controller found in Renesas R-Car
> SoCs. The controller operates in CAN FD only mode by default.
> 
> CAN FD mode supports both Classical CAN & CAN FD frame formats. The
> controller supports ISO 11898-1:2015 CAN FD format only.
> 
> This controller supports two channels and the driver can enable either
> or both of the channels.
> 
> Driver uses Rx FIFOs (one per channel) for reception & Common FIFOs (one
> per channel) for transmission. Rx filter rules are configured to the
> minimum (one per channel) and it accepts Standard, Extended, Data &
> Remote Frame combinations.
> 
> Note: There are few documentation errors in R-Car Gen3 Hardware User
> Manual v0.5E with respect to CAN FD controller. They are listed below:
> 
> 1. CAN FD interrupt numbers 29 & 30 are listed as per channel
> interrupts. However, they are common to both channels (i.e.) they are
> global and channel interrupts respectively.
> 
> 2. CANFD clock is derived from PLL1. This is not documented.
> 
> 3. CANFD clock is further divided by (1/2) within the CAN FD controller.
> This is not documented.
> 
> 4. The minimum value of NTSEG1 in RSCFDnCFDCmNCFG register is 2 Tq. It
> is specified 4 Tq in the manual.
> 
> 5. The maximum number of message RAM area the controller can use is 3584
> bytes. It is specified 10752 bytes in the manual.
> 
> Signed-off-by: Ramesh Shanmugasundaram 
> <ramesh.shanmugasunda...@bp.renesas.com>
> ---
> Hi All,
> 
>    Thanks for the review comments.
> 
>    This updated patch is based on linux-can-next tag 
> (linux-can-next-for-4.6-20160310).
> 
>    This patch depends on
> 
>    [RFC] [PATCH v3] can: fix handling of unmodifiable configuration options
>    (http://comments.gmane.org/gmane.linux.can/9126)
> 
> Changes since v2:
>       * Rebased to latest tag (linux-can-next-for-4.6-20160310)
>       * Cleaned up leftover debugfs code (Thanks Oliver H)
>       * Revised devicetree documentation text (as suggested by Rob H)
>         
> (https://www.mail-archive.com/linux-renesas-soc@vger.kernel.org/msg01597.html)
>       * Used new can subsystem api to set static configuration & removed 
> check in rcar_canfd_start (as suggested by Oliver H)
>         (Refer: http://comments.gmane.org/gmane.linux.can/9126 &
>          
> https://www.mail-archive.com/linux-renesas-soc@vger.kernel.org/msg01867.html)
>       * Clubbed Renesas controller drivers to driver/net/can/rcar dir (as 
> suggested by Oliver H)

Please make moving of the existing drivers a separate patch.

Marc
-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Attachment: signature.asc
Description: OpenPGP digital signature

Reply via email to