On Wed, Jun 01, 2016 at 01:29:05AM +0300, Sergei Shtylyov wrote:
> Describe the IRQC interrupt controller in the R8A7792 device tree.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
>
> ---
> arch/arm/boot/dts/r8a7792.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7792.dtsi
> +++ renesas/arch/arm/boot/dts/r8a7792.dtsi
> @@ -62,6 +62,19 @@
> IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> + irqc: interrupt-controller@e61c0000 {
Could you consider using irqc0 as the node name for consistency with the
DT of other R-Car Gen2 SoCs?
What follows looks correct to me.
> + compatible = "renesas,irqc-r8a7792", "renesas,irqc";
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + reg = <0 0xe61c0000 0 0x200>;
> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
> + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
> + };
> +
> timer {
> compatible = "arm,armv7-timer";
> interrupts = <GIC_PPI 13
>
