[PATCH 27/35] arm64: dts: salvator-x: Add panel backlight support

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>

The panel backlight is controlled through a GPIO and a PWM channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart+rene...@ideasonboard.com>
[simon: apply to salvator-x.dtsi instead of r8a7795-salvator-x.dts]
Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
---
 arch/arm64/boot/dts/renesas/salvator-x.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/salvator-x.dtsi 
b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
index d5eb022d247c..7240bcd75918 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x.dtsi
@@ -58,6 +58,16 @@
                clock-frequency = <11289600>;
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm1 0 50000>;
+
+               brightness-levels = <256 128 64 16 8 4 0>;
+               default-brightness-level = <6>;
+
+               enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+       };
+
        reg_1p8v: regulator0 {
                compatible = "regulator-fixed";
                regulator-name = "fixed-1.8V";
@@ -358,6 +368,11 @@
                function = "i2c2";
        };
 
+       pwm1_pins: pwm {
+               groups = "pwm1_a";
+               function = "pwm1";
+       };
+
        scif1_pins: scif1 {
                groups = "scif1_data_a", "scif1_ctrl";
                function = "scif1";
@@ -443,6 +458,13 @@
        };
 };
 
+&pwm1 {
+       pinctrl-0 = <&pwm1_pins>;
+       pinctrl-names = "default";
+
+       status = "okay";
+};
+
 &rcar_sound {
        pinctrl-0 = <&sound_pins &sound_clk_pins>;
        pinctrl-names = "default";
-- 
2.1.4