A card detect GPIO is set up only for platforms with "cd-gpios"
DT property or TMIO_MMC_USE_GPIO_CD flag. However, the driver
core always uses mmc_gpio_get_cd, which just fails with -ENOSYS
if ctx->cd_gpio is unset.
The bit 5 of the status register provides the current signal level
of the CD line. Allow to use it if the GPIO is unused.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
Changes in v3:
- split out GPIO CD
Changes in v2: None
drivers/mmc/host/tmio_mmc_core.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index f30ac69..b20d5c5 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -1080,6 +1080,14 @@ static int tmio_mmc_get_ro(struct mmc_host *mmc)
TMIO_STAT_WRPROTECT);
}
+static int tmio_mmc_get_cd(struct mmc_host *mmc)
+{
+ struct tmio_mmc_host *host = mmc_priv(mmc);
+
+ return !!(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) &
+ TMIO_STAT_SIGSTATE);
+}
+
static int tmio_multi_io_quirk(struct mmc_card *card,
unsigned int direction, int blk_size)
{
@@ -1095,7 +1103,7 @@ static const struct mmc_host_ops tmio_mmc_ops = {
.request = tmio_mmc_request,
.set_ios = tmio_mmc_set_ios,
.get_ro = tmio_mmc_get_ro,
- .get_cd = mmc_gpio_get_cd,
+ .get_cd = tmio_mmc_get_cd,
.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
.multi_io_quirk = tmio_multi_io_quirk,
.hw_reset = tmio_mmc_hw_reset,
@@ -1248,6 +1256,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
if (mmc_can_gpio_ro(mmc))
_host->ops.get_ro = mmc_gpio_get_ro;
+ if (mmc_can_gpio_cd(mmc))
+ _host->ops.get_ro = mmc_gpio_get_cd;
+
_host->native_hotplug = !(mmc_can_gpio_cd(mmc) ||
mmc->caps & MMC_CAP_NEEDS_POLL ||
!mmc_card_is_removable(mmc));
--
2.7.4
