From: Khiem Nguyen <khiem.nguyen...@rvc.renesas.com>
Because power of Salvator-X board is cut off in suspend,
it needs to reset SATA PHY state in resume.
Otherwise, SATA partition could not be accessed anymore.
Signed-off-by: Khiem Nguyen <khiem.nguyen...@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang...@rvc.renesas.com>
[reinit phy in sata_rcar_resume() function on R-Car Gen3 only]
[factor out SATA module init sequence]
[fixed the prefix for the subject]
Signed-off-by: Yoshihiro Kaneko <ykaneko0...@gmail.com>
---
drivers/ata/sata_rcar.c | 63 +++++++++++++++++++++++++++++++------------------
1 file changed, 40 insertions(+), 23 deletions(-)
This patch is based on the for-next branch of libata tree.
v2 [Yoshihiro Kaneko]
* reinit phy on R-Car Gen3 only as suggested by Geert Uytterhoeven
* use "sata_rcar" prefix for the subject as suggested by Sergei Shtylyov
v3 [Yoshihiro Kaneko]
* As suggested by Sergei Shtylyov
- factored out the common part of the initialising SATA module
- remove the redundant "sata:" prefix from the subject
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 80ee2f2..6f47ca3 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -146,6 +146,7 @@
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
+ RCAR_GEN3_SATA,
RCAR_R8A7790_ES1_SATA,
};
@@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host)
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
}
-static void sata_rcar_init_controller(struct ata_host *host)
+static void sata_rcar_init_module(struct sata_rcar_priv *priv)
{
- struct sata_rcar_priv *priv = host->private_data;
void __iomem *base = priv->base;
u32 val;
- /* reset and setup phy */
- switch (priv->type) {
- case RCAR_GEN1_SATA:
- sata_rcar_gen1_phy_init(priv);
- break;
- case RCAR_GEN2_SATA:
- case RCAR_R8A7790_ES1_SATA:
- sata_rcar_gen2_phy_init(priv);
- break;
- default:
- dev_warn(host->dev, "SATA phy is not initialized\n");
- break;
- }
-
/* SATA-IP reset state */
val = ioread32(base + ATAPI_CONTROL1_REG);
val |= ATAPI_CONTROL1_RESET;
@@ -824,10 +810,34 @@ static void sata_rcar_init_controller(struct ata_host
*host)
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
+
/* enable interrupts */
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
}
+static void sata_rcar_init_controller(struct ata_host *host)
+{
+ struct sata_rcar_priv *priv = host->private_data;
+ void __iomem *base = priv->base;
+
+ /* reset and setup phy */
+ switch (priv->type) {
+ case RCAR_GEN1_SATA:
+ sata_rcar_gen1_phy_init(priv);
+ break;
+ case RCAR_GEN2_SATA:
+ case RCAR_GEN3_SATA:
+ case RCAR_R8A7790_ES1_SATA:
+ sata_rcar_gen2_phy_init(priv);
+ break;
+ default:
+ dev_warn(host->dev, "SATA phy is not initialized\n");
+ break;
+ }
+
+ sata_rcar_init_module(priv);
+}
+
static const struct of_device_id sata_rcar_match[] = {
{
/* Deprecated by "renesas,sata-r8a7779" */
@@ -856,7 +866,7 @@ static void sata_rcar_init_controller(struct ata_host *host)
},
{
.compatible = "renesas,sata-r8a7795",
- .data = (void *)RCAR_GEN2_SATA
+ .data = (void *)RCAR_GEN3_SATA
},
{
.compatible = "renesas,rcar-gen2-sata",
@@ -864,7 +874,7 @@ static void sata_rcar_init_controller(struct ata_host *host)
},
{
.compatible = "renesas,rcar-gen3-sata",
- .data = (void *)RCAR_GEN2_SATA
+ .data = (void *)RCAR_GEN3_SATA
},
{ },
};
@@ -982,11 +992,18 @@ static int sata_rcar_resume(struct device *dev)
if (ret)
return ret;
- /* ack and mask */
- iowrite32(0, base + SATAINTSTAT_REG);
- iowrite32(0x7ff, base + SATAINTMASK_REG);
- /* enable interrupts */
- iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
+ if (priv->type == RCAR_GEN3_SATA) {
+ sata_rcar_gen2_phy_init(priv);
+ sata_rcar_init_module(priv);
+ } else {
+ /* ack and mask */
+ iowrite32(0, base + SATAINTSTAT_REG);
+ iowrite32(0x7ff, base + SATAINTMASK_REG);
+
+ /* enable interrupts */
+ iowrite32(ATAPI_INT_ENABLE_SATAINT,
+ base + ATAPI_INT_ENABLE_REG);
+ }
ata_host_resume(host);
--
1.9.1
