On 07/20/2018 03:05 PM, Simon Horman wrote: > From: Marek Vasut <marek.va...@gmail.com> > > Add PMIC nodes to Porter and connect CPU DVFS supply. There is > one DA9063L and one DA9210 on Porter, the only difference from > the other boards is that DA9063L is at I2C address 0x5a rather > than 0x58 . > > Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com> > Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be> > Signed-off-by: Simon Horman <horms+rene...@verge.net.au> > --- > arch/arm/boot/dts/r8a7791-porter.dts | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7791-porter.dts > b/arch/arm/boot/dts/r8a7791-porter.dts > index a01101b49d99..5f77d73d7462 100644 > --- a/arch/arm/boot/dts/r8a7791-porter.dts > +++ b/arch/arm/boot/dts/r8a7791-porter.dts > @@ -375,10 +375,43 @@ > clock-frequency = <400000>; > }; > > +&i2c6 { > + status = "okay"; > + clock-frequency = <100000>; > + > + pmic@5a { > + compatible = "dlg,da9063l"; > + reg = <0x5a>; > + interrupt-parent = <&irqc0>; > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > + interrupt-controller;
Without a label and #interrupt-cells? > + > + wdt { > + compatible = "dlg,da9063-watchdog"; > + }; > + }; [...] MBR, Sergei