Hi Marek,
On Sun, Jul 22, 2018 at 2:07 PM Marek Vasut <marek.va...@gmail.com> wrote:
> On 07/20/2018 06:38 PM, Sergei Shtylyov wrote:
> > On 07/20/2018 03:05 PM, Simon Horman wrote:
> >> From: Marek Vasut <marek.va...@gmail.com>
> >>
> >> Add PMIC nodes to Porter and connect CPU DVFS supply. There is
> >> one DA9063L and one DA9210 on Porter, the only difference from
> >> the other boards is that DA9063L is at I2C address 0x5a rather
> >> than 0x58 .
> >>
> >> Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
> >> Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
> >> Signed-off-by: Simon Horman <horms+rene...@verge.net.au>
> >> ---
> >> arch/arm/boot/dts/r8a7791-porter.dts | 33
> >> +++++++++++++++++++++++++++++++++
> >> 1 file changed, 33 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/r8a7791-porter.dts
> >> b/arch/arm/boot/dts/r8a7791-porter.dts
> >> index a01101b49d99..5f77d73d7462 100644
> >> --- a/arch/arm/boot/dts/r8a7791-porter.dts
> >> +++ b/arch/arm/boot/dts/r8a7791-porter.dts
> >> @@ -375,10 +375,43 @@
> >> clock-frequency = <400000>;
> >> };
> >>
> >> +&i2c6 {
> >> + status = "okay";
> >> + clock-frequency = <100000>;
> >> +
> >> + pmic@5a {
> >> + compatible = "dlg,da9063l";
> >> + reg = <0x5a>;
> >> + interrupt-parent = <&irqc0>;
> >> + interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> >> + interrupt-controller;
> >
> > Without a label and #interrupt-cells?
>
> Just like the other boards do. What's the problem here ?
Does it support external interrupt inputs? Or only the internal
interrupt sources?
If the former, it needs at least #interrupt-cells (also in the DT bindings).
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
