Setup a thermal zone driven by SoC temperature sensor. Create passive trip
points and bind them to CPUFreq cooling device that supports power
extension.

Based on work by Dien Pham <dien.pham...@renesas.com> for r8a7796 SoC.

Signed-off-by: Biju Das <biju....@bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi 
b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 603cfdb..6f52451 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -138,6 +138,7 @@
                        clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
                        operating-points-v2 = <&cluster0_opp>;
                        capacity-dmips-mhz = <1024>;
+                       #cooling-cells = <2>;
                };
 
                a57_1: cpu@1 {
@@ -150,6 +151,7 @@
                        clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
                        operating-points-v2 = <&cluster0_opp>;
                        capacity-dmips-mhz = <1024>;
+                       #cooling-cells = <2>;
                };
 
                a53_0: cpu@100 {
@@ -159,6 +161,7 @@
                        power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
                        next-level-cache = <&L2_CA53>;
                        enable-method = "psci";
+                       #cooling-cells = <2>;
                        clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
                        operating-points-v2 = <&cluster1_opp>;
                        capacity-dmips-mhz = <560>;
@@ -2248,6 +2251,7 @@
                        polling-delay-passive = <250>;
                        polling-delay = <1000>;
                        thermal-sensors = <&tsc 0>;
+                       sustainable-power = <3874>;
 
                        trips {
                                sensor1_crit: sensor1-crit {
@@ -2262,6 +2266,7 @@
                        polling-delay-passive = <250>;
                        polling-delay = <1000>;
                        thermal-sensors = <&tsc 1>;
+                       sustainable-power = <3874>;
 
                        trips {
                                sensor2_crit: sensor2-crit {
@@ -2270,21 +2275,39 @@
                                        type = "critical";
                                };
                        };
-
                };
 
                sensor_thermal3: sensor-thermal3 {
                        polling-delay-passive = <250>;
                        polling-delay = <1000>;
                        thermal-sensors = <&tsc 2>;
+                       sustainable-power = <3874>;
 
                        trips {
+                               target: trip-point1 {
+                                       temperature = <100000>;
+                                       hysteresis = <1000>;
+                                       type = "passive";
+                               };
+
                                sensor3_crit: sensor3-crit {
                                        temperature = <120000>;
                                        hysteresis = <1000>;
                                        type = "critical";
                                };
                        };
+                       cooling-maps {
+                               map0 {
+                                       trip = <&target>;
+                                       cooling-device = <&a57_0 0 2>;
+                                       contribution = <1024>;
+                               };
+                               map1 {
+                                       trip = <&target>;
+                                       cooling-device = <&a53_0 0 2>;
+                                       contribution = <1024>;
+                               };
+                       };
                };
        };
 
-- 
2.7.4

Reply via email to