Tushar Behera wrote:
> -----Original Message-----
> From: Tushar Behera [mailto:tushar.beh...@linaro.org]
> Sent: Friday, August 26, 2011 6:39 PM
> To: linux-samsung-soc@vger.kernel.org
> Cc: linaro-...@lists.linaro.org; kgene....@samsung.com; patc...@linaro.org
> Subject: [PATCH 2/3] ARM: EXYNOS4: Add support for secondary MMC port on
> ORIGEN
> 
> Secondary MMC port on ORIGEN is connected to sdhci instance 0. Support
> for secondary MMC port is extended by registering sdhci instance 0.
> 
> Since sdhci instance 2 can contain a bootable media, sdhci instance 0
> is registered after instance 2.
> 
Would be helpful if above comments could be included in codes :)

> Signed-off-by: Tushar Behera <tushar.beh...@linaro.org>
> ---
>  arch/arm/mach-exynos4/Kconfig       |    1 +
>  arch/arm/mach-exynos4/mach-origen.c |    7 +++++++
>  2 files changed, 8 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index e6925de..4c14d5e 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -229,6 +229,7 @@ config MACH_ORIGEN
>       select CPU_EXYNOS4210
>       select S3C_DEV_RTC
>       select S3C_DEV_WDT
> +     select S3C_DEV_HSMMC
>       select S3C_DEV_HSMMC2
>       select EXYNOS4_SETUP_SDHCI
>       help
> diff --git a/arch/arm/mach-exynos4/mach-origen.c
b/arch/arm/mach-exynos4/mach-
> origen.c
> index e280270..ae18812 100644
> --- a/arch/arm/mach-exynos4/mach-origen.c
> +++ b/arch/arm/mach-exynos4/mach-origen.c
> @@ -72,6 +72,11 @@ static struct s3c2410_uartcfg origen_uartcfgs[]
__initdata = {
>       },
>  };
> 
> +static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
> +     .cd_type                = S3C_SDHCI_CD_INTERNAL,
> +     .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
> +};
> +
>  static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
>       .cd_type                = S3C_SDHCI_CD_INTERNAL,
>       .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
> @@ -79,6 +84,7 @@ static struct s3c_sdhci_platdata origen_hsmmc2_pdata
> __initdata = {
> 
>  static struct platform_device *origen_devices[] __initdata = {
>       &s3c_device_hsmmc2,
> +     &s3c_device_hsmmc0,
>       &s3c_device_rtc,
>       &s3c_device_wdt,
>  };
> @@ -93,6 +99,7 @@ static void __init origen_map_io(void)
>  static void __init origen_machine_init(void)
>  {
>       s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
> +     s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
>       platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>  }
> 
> --
> 1.7.4.1

OK, will apply.
If you don't mind, I will add comments the reason of the ordering when I
apply this.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to