Hi Kukjin,
On Wednesday 31 August 2011 06:31 AM, Kukjin Kim wrote:
Tushar Behera wrote:
Platform data for SDHCI controller on ORIGEN board is missing the
support for 8-bit bus width. The platform data is extended in sync
with other EXYNOS4 machines.
Signed-off-by: Tushar Behera<tushar.beh...@linaro.org>
---
arch/arm/mach-exynos4/mach-origen.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos4/mach-origen.c
b/arch/arm/mach-exynos4/mach-
origen.c
index ae18812..6b6cd77 100644
--- a/arch/arm/mach-exynos4/mach-origen.c
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -75,11 +75,19 @@ static struct s3c2410_uartcfg origen_uartcfgs[]
__initdata =
{
static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
};
static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_INTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
};
static struct platform_device *origen_devices[] __initdata = {
--
1.7.4.1
Hi Tushar,
I wonder the bus width of SDHCI controller can be changed manually on ORIGEN
like SMDK board.
I will do further test and update you about the results.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim<kgene....@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
