On 08/19/2013 02:57 PM, Inki Dae wrote:
-----Original Message-----
From: linux-media-ow...@vger.kernel.org [mailto:linux-media-
ow...@vger.kernel.org] On Behalf Of Shaik Ameer Basha
Sent: Monday, August 19, 2013 7:59 PM
To: linux-me...@vger.kernel.org; linux-samsung-soc@vger.kernel.org
Cc: s.nawro...@samsung.com; posc...@google.com; arun...@samsung.com;
shaik.am...@samsung.com
Subject: [PATCH v2 4/5] [media] exynos-mscl: Add DT bindings for M-Scaler
driver
This patch adds the DT binding documentation for the exynos5
You may want to say to which specific SoC it applies.
based M-Scaler device driver.
Signed-off-by: Shaik Ameer Basha<shaik.am...@samsung.com>
---
.../devicetree/bindings/media/exynos5-mscl.txt | 34
++++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/exynos5-
mscl.txt
diff --git a/Documentation/devicetree/bindings/media/exynos5-mscl.txt
b/Documentation/devicetree/bindings/media/exynos5-mscl.txt
new file mode 100644
index 0000000..5c9d1b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-mscl.txt
@@ -0,0 +1,34 @@
+* Samsung Exynos5 M-Scaler device
+
+M-Scaler is used for scaling, blending, color fill and color space
+conversion on EXYNOS5 SoCs.
+
+Required properties:
+- compatible: should be "samsung,exynos5-mscl"
What is an exact name of this IP in the datasheet ?
If Exynos5410/5420 have same IP,
"samsung,exynos5410-mscl" for M Scaler IP in Exynos5410/5420"
Else,
Compatible: should be one of the following:
(a) "samsung,exynos5410-mscl" for M Scaler IP in Exynos5410"
(b) "samsung,exynos5420-mscl" for M Scaler IP in Exynos5420"
Yes, except I suspect "mscl" is incorrect. It sounds like an unclear
abbreviation of real name of the IP. It likely should be "mscaler".
+- reg: should contain M-Scaler physical address location and length.
+- interrupts: should contain M-Scaler interrupt number
+- clocks: should contain the clock number according to CCF
Hmm, this sounds like a Linux specific term in the binding. Perhaps:
- clocks: should contain the M-Scaler clock specifier, from the common
clock bindings
?
+- clock-names: should be "mscl"
+
+Example:
+
+ mscl_0: mscl@0x12800000 {
s/0x//
+ compatible = "samsung,exynos5-mscl";
"samsung,exynos5410-mscl";
+ reg =<0x12800000 0x1000>;
+ interrupts =<0 220 0>;
+ clocks =<&clock 381>;
+ clock-names = "mscl";
+ };
+
+Aliases:
+Each M-Scaler node should have a numbered alias in the aliases node,
+in the form of msclN, N = 0...2. M-Scaler driver uses these aliases
+to retrieve the device IDs using "of_alias_get_id()" call.
So except in debug logs and for selecting variant data (which is same for
all IP instances) are the aliases used for anything else ?
I suspect you could do without these aliases. Device name includes start
address of the IP register region, so that could be used to identify the
M-Scaler instance in the logs.
--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
