Hi Sylwester, Almost all of the comments are already addressed. Will try to post the v3 by tomorrow.
I have one doubt? Do I need to rebase this driver on m2m-helpers-v2 or once the driver is merged we can take this up? Regards, Shaik Ameer Basha On Thu, Aug 29, 2013 at 6:51 PM, Sylwester Nawrocki <s.nawro...@samsung.com> wrote: > On 08/19/2013 12:58 PM, Shaik Ameer Basha wrote: >> This patch adds the memory to memory (m2m) interface functionality >> for the M-Scaler driver. >> >> Signed-off-by: Shaik Ameer Basha <shaik.am...@samsung.com> >> --- >> drivers/media/platform/exynos-mscl/mscl-m2m.c | 763 >> +++++++++++++++++++++++++ >> 1 file changed, 763 insertions(+) >> create mode 100644 drivers/media/platform/exynos-mscl/mscl-m2m.c >> >> diff --git a/drivers/media/platform/exynos-mscl/mscl-m2m.c >> b/drivers/media/platform/exynos-mscl/mscl-m2m.c >> new file mode 100644 >> index 0000000..fecbb57 >> --- /dev/null >> +++ b/drivers/media/platform/exynos-mscl/mscl-m2m.c >> @@ -0,0 +1,763 @@ >> +/* >> + * Copyright (c) 2013 - 2014 Samsung Electronics Co., Ltd. > > 2013 - 2014 ?? > >> + * http://www.samsung.com >> + * >> + * Samsung EXYNOS5 SoC series M-Scaler driver >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License as published >> + * by the Free Software Foundation, either version 2 of the License, >> + * or (at your option) any later version. >> + */ >> + >> +#include <linux/module.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/slab.h> >> + >> +#include <media/v4l2-ioctl.h> >> + >> +#include "mscl-core.h" >> + >> +static int mscl_m2m_ctx_stop_req(struct mscl_ctx *ctx) >> +{ >> + struct mscl_ctx *curr_ctx; >> + struct mscl_dev *mscl = ctx->mscl_dev; >> + int ret; >> + >> + curr_ctx = v4l2_m2m_get_curr_priv(mscl->m2m.m2m_dev); >> + if (!mscl_m2m_pending(mscl) || (curr_ctx != ctx)) >> + return 0; >> + >> + mscl_ctx_state_lock_set(MSCL_CTX_STOP_REQ, ctx); >> + ret = wait_event_timeout(mscl->irq_queue, >> + !mscl_ctx_state_is_set(MSCL_CTX_STOP_REQ, ctx), >> + MSCL_SHUTDOWN_TIMEOUT); >> + >> + return ret == 0 ? -ETIMEDOUT : ret; >> +} >> + >> +static int mscl_m2m_start_streaming(struct vb2_queue *q, unsigned int count) >> +{ >> + struct mscl_ctx *ctx = q->drv_priv; >> + int ret; >> + >> + ret = pm_runtime_get_sync(&ctx->mscl_dev->pdev->dev); >> + >> + return ret > 0 ? 0 : ret; >> +} >> + >> +static int mscl_m2m_stop_streaming(struct vb2_queue *q) >> +{ >> + struct mscl_ctx *ctx = q->drv_priv; >> + int ret; >> + >> + ret = mscl_m2m_ctx_stop_req(ctx); >> + if (ret == -ETIMEDOUT) >> + mscl_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); >> + >> + pm_runtime_put(&ctx->mscl_dev->pdev->dev); >> + >> + return 0; >> +} >> + >> +void mscl_m2m_job_finish(struct mscl_ctx *ctx, int vb_state) >> +{ >> + struct vb2_buffer *src_vb, *dst_vb; >> + >> + if (!ctx || !ctx->m2m_ctx) >> + return; >> + >> + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx); >> + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx); >> + >> + if (src_vb && dst_vb) { >> + v4l2_m2m_buf_done(src_vb, vb_state); >> + v4l2_m2m_buf_done(dst_vb, vb_state); >> + >> + v4l2_m2m_job_finish(ctx->mscl_dev->m2m.m2m_dev, >> + ctx->m2m_ctx); >> + } >> +} >> + >> + > > Stray empty line. > >> +static void mscl_m2m_job_abort(void *priv) >> +{ >> + struct mscl_ctx *ctx = priv; >> + int ret; >> + >> + ret = mscl_m2m_ctx_stop_req(ctx); >> + if (ret == -ETIMEDOUT) >> + mscl_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR); >> +} >> + >> +static int mscl_get_bufs(struct mscl_ctx *ctx) >> +{ >> + struct mscl_frame *s_frame, *d_frame; >> + struct vb2_buffer *src_vb, *dst_vb; >> + int ret; >> + >> + s_frame = &ctx->s_frame; >> + d_frame = &ctx->d_frame; >> + >> + src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx); >> + ret = mscl_prepare_addr(ctx, src_vb, s_frame, &s_frame->addr); >> + if (ret) > > How about using "if (ret < 0)" pattern consistently ? > >> + return ret; >> + >> + dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx); >> + ret = mscl_prepare_addr(ctx, dst_vb, d_frame, &d_frame->addr); >> + if (ret) >> + return ret; >> + >> + dst_vb->v4l2_buf.timestamp = src_vb->v4l2_buf.timestamp; >> + >> + return 0; >> +} >> + >> +static void mscl_m2m_device_run(void *priv) >> +{ >> + struct mscl_ctx *ctx = priv; >> + struct mscl_dev *mscl; >> + unsigned long flags; >> + int ret; >> + bool is_set = false; > > Unneeded initialization. And I can see a room for improvement WRT > the variable's name. > >> + >> + if (WARN(!ctx, "null hardware context\n")) >> + return; >> + >> + mscl = ctx->mscl_dev; >> + spin_lock_irqsave(&mscl->slock, flags); >> + >> + set_bit(ST_M2M_PEND, &mscl->state); >> + >> + /* Reconfigure hardware if the context has changed. */ >> + if (mscl->m2m.ctx != ctx) { >> + dev_dbg(&mscl->pdev->dev, >> + "mscl->m2m.ctx = 0x%p, current_ctx = 0x%p", >> + mscl->m2m.ctx, ctx); >> + ctx->state |= MSCL_PARAMS; >> + mscl->m2m.ctx = ctx; >> + } >> + >> + is_set = (ctx->state & MSCL_CTX_STOP_REQ) ? 1 : 0; > > Just make it > > is_set = ctx->state & MSCL_CTX_STOP_REQ; > >> + ctx->state &= ~MSCL_CTX_STOP_REQ; >> + if (is_set) { >> + wake_up(&mscl->irq_queue); >> + goto put_device; >> + } >> + >> + ret = mscl_get_bufs(ctx); >> + if (ret) { >> + dev_dbg(&mscl->pdev->dev, "Wrong address"); > > Missing '\n'. > >> + goto put_device; >> + } >> + >> + mscl_hw_address_queue_reset(ctx); >> + mscl_set_prefbuf(mscl, &ctx->s_frame); >> + mscl_hw_set_input_addr(mscl, &ctx->s_frame.addr); >> + mscl_hw_set_output_addr(mscl, &ctx->d_frame.addr); >> + mscl_hw_set_csc_coeff(ctx); >> + >> + if (ctx->state & MSCL_PARAMS) { >> + mscl_hw_set_irq_mask(mscl, MSCL_INT_FRAME_END, false); >> + if (mscl_set_scaler_info(ctx)) { >> + dev_dbg(&mscl->pdev->dev, "Scaler setup error"); >> + goto put_device; >> + } >> + >> + mscl_hw_set_in_size(ctx); >> + mscl_hw_set_in_image_format(ctx); >> + >> + mscl_hw_set_out_size(ctx); >> + mscl_hw_set_out_image_format(ctx); >> + >> + mscl_hw_set_scaler_ratio(ctx); >> + mscl_hw_set_rotation(ctx); >> + } >> + >> + ctx->state &= ~MSCL_PARAMS; >> + mscl_hw_enable_control(mscl, true); >> + >> + spin_unlock_irqrestore(&mscl->slock, flags); >> + return; >> + >> +put_device: > > nit: Perhaps just "unlock". There is nothing like "put device" here. > >> + ctx->state &= ~MSCL_PARAMS; >> + spin_unlock_irqrestore(&mscl->slock, flags); >> +} >> + >> +static int mscl_m2m_queue_setup(struct vb2_queue *vq, >> + const struct v4l2_format *fmt, >> + unsigned int *num_buffers, unsigned int *num_planes, >> + unsigned int sizes[], void *allocators[]) >> +{ >> + struct mscl_ctx *ctx = vb2_get_drv_priv(vq); >> + struct mscl_frame *frame; >> + int i; >> + >> + frame = ctx_get_frame(ctx, vq->type); >> + if (IS_ERR(frame)) >> + return PTR_ERR(frame); >> + >> + if (!frame->fmt) >> + return -EINVAL; >> + >> + *num_planes = frame->fmt->num_planes; >> + for (i = 0; i < frame->fmt->num_planes; i++) { >> + sizes[i] = frame->payload[i]; >> + allocators[i] = ctx->mscl_dev->alloc_ctx; >> + } >> + return 0; >> +} >> + >> +static int mscl_m2m_buf_prepare(struct vb2_buffer *vb) >> +{ >> + struct mscl_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); >> + struct mscl_frame *frame; >> + int i; >> + >> + frame = ctx_get_frame(ctx, vb->vb2_queue->type); >> + if (IS_ERR(frame)) >> + return PTR_ERR(frame); > > You should check if the buffer passed is suitable for currently set > image format. If not then error should be returned here. > > Then you could remove all that MSCL_SRC_FMT/MSCL_DST_FMT logic. > >> + if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) { >> + for (i = 0; i < frame->fmt->num_planes; i++) >> + vb2_set_plane_payload(vb, i, frame->payload[i]); >> + } >> + >> + return 0; >> +} >> + >> +static void mscl_m2m_buf_queue(struct vb2_buffer *vb) >> +{ >> + struct mscl_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue); >> + >> + dev_dbg(&ctx->mscl_dev->pdev->dev, >> + "ctx: %p, ctx->state: 0x%x", ctx, ctx->state); >> + >> + if (ctx->m2m_ctx) >> + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb); >> +} >> + >> +static struct vb2_ops mscl_m2m_qops = { >> + .queue_setup = mscl_m2m_queue_setup, >> + .buf_prepare = mscl_m2m_buf_prepare, >> + .buf_queue = mscl_m2m_buf_queue, >> + .wait_prepare = mscl_unlock, >> + .wait_finish = mscl_lock, >> + .stop_streaming = mscl_m2m_stop_streaming, >> + .start_streaming = mscl_m2m_start_streaming, >> +}; >> + >> +static int mscl_m2m_querycap(struct file *file, void *fh, >> + struct v4l2_capability *cap) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + struct mscl_dev *mscl = ctx->mscl_dev; >> + >> + strlcpy(cap->driver, mscl->pdev->name, sizeof(cap->driver)); >> + strlcpy(cap->card, mscl->pdev->name, sizeof(cap->card)); >> + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info)); >> + cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE | > >> + V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE; > > As Hans pointed out, this line need to be removed. > >> + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS; >> + >> + return 0; >> +} >> + >> +static int mscl_m2m_enum_fmt_mplane(struct file *file, void *priv, >> + struct v4l2_fmtdesc *f) >> +{ >> + return mscl_enum_fmt_mplane(f); >> +} >> + >> +static int mscl_m2m_g_fmt_mplane(struct file *file, void *fh, >> + struct v4l2_format *f) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + >> + return mscl_g_fmt_mplane(ctx, f); >> +} >> + >> +static int mscl_m2m_try_fmt_mplane(struct file *file, void *fh, >> + struct v4l2_format *f) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + >> + return mscl_try_fmt_mplane(ctx, f); >> +} >> + >> +static int mscl_m2m_s_fmt_mplane(struct file *file, void *fh, >> + struct v4l2_format *f) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + struct vb2_queue *vq; >> + struct mscl_frame *frame; >> + struct v4l2_pix_format_mplane *pix; >> + int i, ret = 0; >> + >> + ret = mscl_m2m_try_fmt_mplane(file, fh, f); >> + if (ret) >> + return ret; >> + >> + vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type); >> + >> + if (vb2_is_streaming(vq)) { >> + dev_dbg(&ctx->mscl_dev->pdev->dev, "queue (%d) busy", f->type); >> + return -EBUSY; >> + } >> + >> + if (V4L2_TYPE_IS_OUTPUT(f->type)) >> + frame = &ctx->s_frame; >> + else >> + frame = &ctx->d_frame; >> + >> + pix = &f->fmt.pix_mp; >> + frame->fmt = mscl_find_fmt(&pix->pixelformat, NULL, 0); >> + frame->colorspace = pix->colorspace; >> + if (!frame->fmt) >> + return -EINVAL; >> + >> + for (i = 0; i < frame->fmt->num_planes; i++) >> + frame->payload[i] = pix->plane_fmt[i].sizeimage; >> + >> + mscl_set_frame_size(frame, pix->width, pix->height); >> + >> + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) >> + mscl_ctx_state_lock_set(MSCL_PARAMS | MSCL_DST_FMT, ctx); >> + else >> + mscl_ctx_state_lock_set(MSCL_PARAMS | MSCL_SRC_FMT, ctx); >> + >> + dev_dbg(&ctx->mscl_dev->pdev->dev, "f_w: %d, f_h: %d", >> + frame->f_width, frame->f_height); >> + >> + return 0; >> +} >> + >> +static int mscl_m2m_reqbufs(struct file *file, void *fh, >> + struct v4l2_requestbuffers *reqbufs) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + struct mscl_dev *mscl = ctx->mscl_dev; >> + struct mscl_frame *frame; >> + u32 max_cnt; > >> + max_cnt = (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) ? >> + mscl->variant->in_buf_cnt : mscl->variant->out_buf_cnt; > > That looks pretty ugly, how about: > > if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) > max_cnt = mscl->variant->in_buf_cnt; > else > max_cnt = mscl->variant->out_buf_cnt; > ? >> + if (reqbufs->count > max_cnt) { >> + return -EINVAL; > > Hell, no. Just adjust it to a supported value. Applications need to check > reqbufs->count upon VIDIOC_REQBUFS return. > >> + } else if (reqbufs->count == 0) { >> + if (reqbufs->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) >> + mscl_ctx_state_lock_clear(MSCL_SRC_FMT, ctx); >> + else >> + mscl_ctx_state_lock_clear(MSCL_DST_FMT, ctx); > > Such logic shouldn't be here. > >> + } >> + >> + frame = ctx_get_frame(ctx, reqbufs->type); >> + >> + return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs); >> +} >> + >> +static int mscl_m2m_expbuf(struct file *file, void *fh, >> + struct v4l2_exportbuffer *eb) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + return v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb); >> +} >> + >> +static int mscl_m2m_querybuf(struct file *file, void *fh, >> + struct v4l2_buffer *buf) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf); >> +} >> + >> +static int mscl_m2m_qbuf(struct file *file, void *fh, >> + struct v4l2_buffer *buf) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf); >> +} >> + >> +static int mscl_m2m_dqbuf(struct file *file, void *fh, >> + struct v4l2_buffer *buf) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf); >> +} >> + >> +static int mscl_m2m_streamon(struct file *file, void *fh, >> + enum v4l2_buf_type type) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + >> + /* The source and target color format need to be set */ >> + if (V4L2_TYPE_IS_OUTPUT(type)) { >> + if (!mscl_ctx_state_is_set(MSCL_SRC_FMT, ctx)) >> + return -EINVAL; >> + } else if (!mscl_ctx_state_is_set(MSCL_DST_FMT, ctx)) { >> + return -EINVAL; >> + } > > That's not correct. There should always be some valid format set. > Buffer validation accroding to configred format should be done > in buffer_queue handler. > >> + return v4l2_m2m_streamon(file, ctx->m2m_ctx, type); >> +} >> + >> +static int mscl_m2m_streamoff(struct file *file, void *fh, >> + enum v4l2_buf_type type) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type); >> +} > > I have prepared some helper functions, so such boiler plate can be avoided. > But this could be handled later. See > http://git.linuxtv.org/snawrocki/samsung.git/shortlog/refs/heads/m2m-helpers-v2 > >> +/* Return 1 if rectangle a is enclosed in rectangle b, or 0 otherwise. */ >> +static int is_rectangle_enclosed(struct v4l2_rect *a, struct v4l2_rect *b) >> +{ >> + if (a->left < b->left || a->top < b->top) >> + return 0; >> + >> + if (a->left + a->width > b->left + b->width) >> + return 0; >> + >> + if (a->top + a->height > b->top + b->height) >> + return 0; >> + >> + return 1; >> +} >> + >> +static int mscl_m2m_g_selection(struct file *file, void *fh, >> + struct v4l2_selection *s) >> +{ >> + struct mscl_frame *frame; >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + >> + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && >> + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) >> + return -EINVAL; >> + >> + frame = ctx_get_frame(ctx, s->type); >> + if (IS_ERR(frame)) >> + return PTR_ERR(frame); >> + >> + switch (s->target) { >> + case V4L2_SEL_TGT_COMPOSE_DEFAULT: >> + case V4L2_SEL_TGT_COMPOSE_BOUNDS: >> + case V4L2_SEL_TGT_CROP_BOUNDS: >> + case V4L2_SEL_TGT_CROP_DEFAULT: >> + s->r.left = 0; >> + s->r.top = 0; >> + s->r.width = frame->f_width; >> + s->r.height = frame->f_height; >> + return 0; >> + >> + case V4L2_SEL_TGT_COMPOSE: >> + case V4L2_SEL_TGT_CROP: >> + s->r.left = frame->crop.left; >> + s->r.top = frame->crop.top; >> + s->r.width = frame->crop.width; >> + s->r.height = frame->crop.height; >> + return 0; >> + } > > Hmm, we still have the selection API not clearly defined for the > mem-to-mem devices... > >> + return -EINVAL; >> +} >> + >> +static int mscl_m2m_s_selection(struct file *file, void *fh, >> + struct v4l2_selection *s) >> +{ >> + struct mscl_frame *frame; >> + struct mscl_ctx *ctx = fh_to_ctx(fh); >> + struct v4l2_crop cr; >> + struct mscl_variant *variant = ctx->mscl_dev->variant; >> + int ret; >> + >> + cr.type = s->type; >> + cr.c = s->r; >> + >> + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) && >> + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)) >> + return -EINVAL; >> + >> + ret = mscl_try_crop(ctx, &cr); >> + if (ret) >> + return ret; >> + >> + if (s->flags & V4L2_SEL_FLAG_LE && >> + !is_rectangle_enclosed(&cr.c, &s->r)) >> + return -ERANGE; >> + >> + if (s->flags & V4L2_SEL_FLAG_GE && >> + !is_rectangle_enclosed(&s->r, &cr.c)) >> + return -ERANGE; >> + >> + s->r = cr.c; >> + >> + switch (s->target) { >> + case V4L2_SEL_TGT_COMPOSE_BOUNDS: >> + case V4L2_SEL_TGT_COMPOSE_DEFAULT: >> + case V4L2_SEL_TGT_COMPOSE: >> + frame = &ctx->s_frame; >> + break; >> + >> + case V4L2_SEL_TGT_CROP_BOUNDS: >> + case V4L2_SEL_TGT_CROP: >> + case V4L2_SEL_TGT_CROP_DEFAULT: >> + frame = &ctx->d_frame; >> + break; >> + >> + default: >> + return -EINVAL; >> + } >> + >> + /* Check to see if scaling ratio is within supported range */ >> + if (mscl_ctx_state_is_set(MSCL_DST_FMT | MSCL_SRC_FMT, ctx)) { >> + if (s->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) { >> + ret = mscl_check_scaler_ratio(variant, cr.c.width, >> + cr.c.height, ctx->d_frame.crop.width, >> + ctx->d_frame.crop.height, >> + ctx->ctrls_mscl.rotate->val); >> + } else { >> + ret = mscl_check_scaler_ratio(variant, >> + ctx->s_frame.crop.width, >> + ctx->s_frame.crop.height, cr.c.width, >> + cr.c.height, ctx->ctrls_mscl.rotate->val); >> + } >> + >> + if (ret) { >> + dev_dbg(&ctx->mscl_dev->pdev->dev, >> + "Out of scaler range"); >> + return -EINVAL; >> + } >> + } >> + >> + frame->crop = cr.c; >> + >> + mscl_ctx_state_lock_set(MSCL_PARAMS, ctx); >> + return 0; >> +} >> + >> +static const struct v4l2_ioctl_ops mscl_m2m_ioctl_ops = { >> + .vidioc_querycap = mscl_m2m_querycap, >> + .vidioc_enum_fmt_vid_cap_mplane = mscl_m2m_enum_fmt_mplane, >> + .vidioc_enum_fmt_vid_out_mplane = mscl_m2m_enum_fmt_mplane, >> + .vidioc_g_fmt_vid_cap_mplane = mscl_m2m_g_fmt_mplane, >> + .vidioc_g_fmt_vid_out_mplane = mscl_m2m_g_fmt_mplane, >> + .vidioc_try_fmt_vid_cap_mplane = mscl_m2m_try_fmt_mplane, >> + .vidioc_try_fmt_vid_out_mplane = mscl_m2m_try_fmt_mplane, >> + .vidioc_s_fmt_vid_cap_mplane = mscl_m2m_s_fmt_mplane, >> + .vidioc_s_fmt_vid_out_mplane = mscl_m2m_s_fmt_mplane, >> + .vidioc_reqbufs = mscl_m2m_reqbufs, >> + .vidioc_expbuf = mscl_m2m_expbuf, >> + .vidioc_querybuf = mscl_m2m_querybuf, >> + .vidioc_qbuf = mscl_m2m_qbuf, >> + .vidioc_dqbuf = mscl_m2m_dqbuf, >> + .vidioc_streamon = mscl_m2m_streamon, >> + .vidioc_streamoff = mscl_m2m_streamoff, >> + .vidioc_g_selection = mscl_m2m_g_selection, >> + .vidioc_s_selection = mscl_m2m_s_selection >> +}; >> + >> +static int queue_init(void *priv, struct vb2_queue *src_vq, >> + struct vb2_queue *dst_vq) >> +{ >> + struct mscl_ctx *ctx = priv; >> + int ret; >> + >> + memset(src_vq, 0, sizeof(*src_vq)); >> + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE; >> + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; >> + src_vq->drv_priv = ctx; >> + src_vq->ops = &mscl_m2m_qops; >> + src_vq->mem_ops = &vb2_dma_contig_memops; >> + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); >> + >> + ret = vb2_queue_init(src_vq); >> + if (ret) >> + return ret; >> + >> + memset(dst_vq, 0, sizeof(*dst_vq)); >> + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE; >> + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; >> + dst_vq->drv_priv = ctx; >> + dst_vq->ops = &mscl_m2m_qops; >> + dst_vq->mem_ops = &vb2_dma_contig_memops; >> + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer); >> + >> + return vb2_queue_init(dst_vq); >> +} >> + >> +static int mscl_m2m_open(struct file *file) >> +{ >> + struct mscl_dev *mscl = video_drvdata(file); > > Don't use video_drvdata(), this is racy! Instead use video_devdata() and > container_of() to get to struct mscl_dev. > >> + struct mscl_ctx *ctx = NULL; >> + int ret; >> + >> + dev_dbg(&mscl->pdev->dev, >> + "pid: %d, state: 0x%lx", task_pid_nr(current), mscl->state); >> + >> + if (mutex_lock_interruptible(&mscl->lock)) >> + return -ERESTARTSYS; >> + >> + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); >> + if (!ctx) { >> + ret = -ENOMEM; >> + goto unlock; >> + } >> + >> + v4l2_fh_init(&ctx->fh, mscl->m2m.vfd); >> + ret = mscl_ctrls_create(ctx); >> + if (ret) >> + goto error_fh; >> + >> + /* Use separate control handler per file handle */ >> + ctx->fh.ctrl_handler = &ctx->ctrl_handler; >> + file->private_data = &ctx->fh; >> + v4l2_fh_add(&ctx->fh); >> + >> + ctx->mscl_dev = mscl; >> + /* Default color format */ >> + ctx->s_frame.fmt = mscl_get_format(0); >> + ctx->d_frame.fmt = mscl_get_format(0); >> + /* Setup the device context for mem2mem mode. */ >> + ctx->state = MSCL_CTX_M2M; >> + ctx->flags = 0; >> + >> + ctx->m2m_ctx = v4l2_m2m_ctx_init(mscl->m2m.m2m_dev, ctx, queue_init); >> + if (IS_ERR(ctx->m2m_ctx)) { >> + dev_dbg(&mscl->pdev->dev, "Failed to initialize m2m context"); >> + ret = PTR_ERR(ctx->m2m_ctx); >> + goto error_ctrls; >> + } >> + >> + if (mscl->m2m.refcnt++ == 0) >> + set_bit(ST_M2M_OPEN, &mscl->state); >> + >> + dev_dbg(&mscl->pdev->dev, "mscl m2m driver is opened, ctx(0x%p)", ctx); >> + >> + mutex_unlock(&mscl->lock); >> + return 0; >> + >> +error_ctrls: >> + mscl_ctrls_delete(ctx); >> +error_fh: >> + v4l2_fh_del(&ctx->fh); >> + v4l2_fh_exit(&ctx->fh); >> + kfree(ctx); >> +unlock: >> + mutex_unlock(&mscl->lock); >> + return ret; >> +} >> + >> +static int mscl_m2m_release(struct file *file) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(file->private_data); >> + struct mscl_dev *mscl = ctx->mscl_dev; >> + >> + dev_dbg(&mscl->pdev->dev, "pid: %d, state: 0x%lx, refcnt= %d", >> + task_pid_nr(current), mscl->state, mscl->m2m.refcnt); >> + >> + mutex_lock(&mscl->lock); >> + >> + v4l2_m2m_ctx_release(ctx->m2m_ctx); >> + mscl_ctrls_delete(ctx); >> + v4l2_fh_del(&ctx->fh); >> + v4l2_fh_exit(&ctx->fh); >> + >> + if (--mscl->m2m.refcnt <= 0) >> + clear_bit(ST_M2M_OPEN, &mscl->state); >> + kfree(ctx); >> + >> + mutex_unlock(&mscl->lock); >> + return 0; >> +} >> + >> +static unsigned int mscl_m2m_poll(struct file *file, >> + struct poll_table_struct *wait) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(file->private_data); >> + struct mscl_dev *mscl = ctx->mscl_dev; >> + int ret; >> + >> + if (mutex_lock_interruptible(&mscl->lock)) >> + return -ERESTARTSYS; >> + >> + ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait); >> + mutex_unlock(&mscl->lock); >> + >> + return ret; >> +} >> + >> +static int mscl_m2m_mmap(struct file *file, struct vm_area_struct *vma) >> +{ >> + struct mscl_ctx *ctx = fh_to_ctx(file->private_data); >> + struct mscl_dev *mscl = ctx->mscl_dev; >> + int ret; >> + >> + if (mutex_lock_interruptible(&mscl->lock)) >> + return -ERESTARTSYS; >> + >> + ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma); >> + mutex_unlock(&mscl->lock); >> + >> + return ret; >> +} >> + >> +static const struct v4l2_file_operations mscl_m2m_fops = { >> + .owner = THIS_MODULE, >> + .open = mscl_m2m_open, >> + .release = mscl_m2m_release, >> + .poll = mscl_m2m_poll, >> + .unlocked_ioctl = video_ioctl2, >> + .mmap = mscl_m2m_mmap, >> +}; >> + >> +static struct v4l2_m2m_ops mscl_m2m_ops = { >> + .device_run = mscl_m2m_device_run, >> + .job_abort = mscl_m2m_job_abort, >> +}; >> + >> +int mscl_register_m2m_device(struct mscl_dev *mscl) >> +{ >> + struct platform_device *pdev; >> + int ret; >> + >> + if (!mscl) >> + return -ENODEV; >> + >> + pdev = mscl->pdev; >> + >> + mscl->vdev.fops = &mscl_m2m_fops; >> + mscl->vdev.ioctl_ops = &mscl_m2m_ioctl_ops; >> + mscl->vdev.release = video_device_release_empty; > > You need to provide this callback, and it would kfree struct mscl_dev. > >> + mscl->vdev.lock = &mscl->lock; >> + mscl->vdev.vfl_dir = VFL_DIR_M2M; >> + snprintf(mscl->vdev.name, sizeof(mscl->vdev.name), "%s.%d:m2m", >> + MSCL_MODULE_NAME, mscl->id); > > So video device names also use the id which comes from DT alias node. > Is it really needed to be able to identify to which IP instance > a /dev/video? netry corresponds ? I guess it is meaningles, given that > those IPs are identical ? > >> + video_set_drvdata(&mscl->vdev, mscl); >> + >> + mscl->m2m.vfd = &mscl->vdev; >> + mscl->m2m.m2m_dev = v4l2_m2m_init(&mscl_m2m_ops); >> + if (IS_ERR(mscl->m2m.m2m_dev)) { >> + dev_err(&pdev->dev, "failed to initialize v4l2-m2m device\n"); >> + return PTR_ERR(mscl->m2m.m2m_dev); >> + } >> + >> + ret = video_register_device(&mscl->vdev, VFL_TYPE_GRABBER, -1); >> + if (ret) { >> + dev_err(&pdev->dev, >> + "%s(): failed to register video device\n", __func__); >> + v4l2_m2m_release(mscl->m2m.m2m_dev); >> + return ret; >> + } >> + >> + dev_info(&pdev->dev, >> + "mscl m2m driver registered as /dev/video%d", mscl->vdev.num); > > s/mscl m2m/SCALER ? > >> + return 0; >> +} >> + >> +void mscl_unregister_m2m_device(struct mscl_dev *mscl) >> +{ >> + if (mscl) >> + v4l2_m2m_release(mscl->m2m.m2m_dev); > > Are you calling video_unregister_device() somewhere ? > >> +} > > -- > Regards, > Sylwester > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html