Hi Lukasz,
On Fri, Jan 30, 2015 at 8:36 PM, Abhilash Kesavan
<kesavan.abhil...@gmail.com> wrote:
> Hi Lukasz,
>
> On Fri, Jan 30, 2015 at 1:44 PM, Lukasz Majewski <l.majew...@samsung.com>
> wrote:
>> Hi Eduardo, Abhilash,
>>
>>> On Thu, Jan 22, 2015 at 06:02:07PM +0530, Abhilash Kesavan wrote:
>>> > Hi Lukasz,
>>> >
>>> > On Thu, Jan 22, 2015 at 2:31 PM, Lukasz Majewski
>>> > <l.majew...@samsung.com> wrote:
>>> > > Hi Abhilash,
>>> > >
>>> > >> Hi Lukasz,
>>> > >>
>>> > >> On Mon, Jan 19, 2015 at 5:14 PM, Lukasz Majewski
>>> > >> <l.majew...@samsung.com> wrote:
>>> > >> > The exynos_map_dt_data() function must be called before
>>> > >> > thermal_zone_of_sensor_register(), and hence provide tmu_read()
>>> > >> > function, before it is needed.
>>> > >> >
>>> > >> > This change is driven by adding support for enabling
>>> > >> > thermal_zoneX when it is properly initialized.
>>> > >> >
>>> > >> > One can read the mode of operation
>>> > >> > at /sys/class/thermal/thermal_zone0/mode Such functionality was
>>> > >> > missing in the of-thermal.c code.
>>> > >> >
>>> > >> > Reported-by: Abhilash Kesavan <a.kesa...@samsung.com>
>>> > >> > Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
>>> > >> > ---
>>> > >> > drivers/thermal/samsung/exynos_tmu.c | 7 ++++---
>>> > >> > 1 file changed, 4 insertions(+), 3 deletions(-)
>>> > >> >
>>> > >> > diff --git a/drivers/thermal/samsung/exynos_tmu.c
>>> > >> > b/drivers/thermal/samsung/exynos_tmu.c index 9d2d685..5d946ab
>>> > >> > 100644 --- a/drivers/thermal/samsung/exynos_tmu.c
>>> > >> > +++ b/drivers/thermal/samsung/exynos_tmu.c
>>> > >> > @@ -975,15 +975,16 @@ static int exynos_tmu_probe(struct
>>> > >> > platform_device *pdev) platform_set_drvdata(pdev, data);
>>> > >> > mutex_init(&data->lock);
>>> > >> >
>>> > >> > + ret = exynos_map_dt_data(pdev);
>>> > >> > + if (ret)
>>> > >> > + goto err_sensor;
>>> > >> > +
>>> > >> > data->tzd =
>>> > >> > thermal_zone_of_sensor_register(&pdev->dev, 0, data,
>>> > >> > &exynos_sensor_ops); if (IS_ERR(data->tzd)) {
>>> > >> > pr_err("thermal: tz: %p ERROR\n", data->tzd);
>>> > >> > return PTR_ERR(data->tzd);
>>> > >> > }
>>> > >> > - ret = exynos_map_dt_data(pdev);
>>> > >> > - if (ret)
>>> > >> > - goto err_sensor;
>>> > >> >
>>> > >> > pdata = data->pdata;
>>> > >>
>>> > >> I have been testing this along with your v5 patch set and am
>>> > >> seeing incorrect temperature being reported at boot-up on
>>> > >> exynos7.
>>> > >
>>> > > Does it show a maximal temperature value (0x1FF)?
>>> >
>>> > I did not print the current temperature register, but I remember the
>>> > message showing ~105C. Will give you the register value when I test
>>> > with more debug prints tomorrow.
>>> >
>>> > >
>>> > >> It looks
>>> > >> like exynos_tmu_read gets called from
>>> > >> thermal_zone_of_device_update during boot-up, now that we have
>>> > >> it populated early. However, as the tmu initialization function
>>> > >> has not been called yet it returns a wrong value. Does that
>>> > >> sound correct ?
>>> > >
>>> > > No, this is a mistake. However, I'm wondering why on Exynos4/5
>>> > > this error didn't show up...
>>> >
>>> > I have been lowering the software trip point temperature in the
>>> > exynos7 dts file (to 55C) for testing purposes. Hence, when the
>>> > temperature is read incorrectly as ~105C the board trips at boot-up
>>
>> ^^^^ this is a very unusual
>> value - I had problems with
>> reading 0xFF values with
>> similar symptom (but this was
>> caused by lack of vtmu).
>>
>>> > itself. Maybe for exynos4/5 the incorrect value read during boot-up
>>> > is in the non-tripping range and once the tmu is initialized later
>>> > it continues to function properly thereafter ?
>>> >
>>> > >
>>> > > The reordering is needed to be able to call set_mode callback at
>>> > > of-thermal.c to set the mode.
>>> > >
>>> > > If this change causes problems, then another solution (probably
>>> > > not so neat) must be found.
>>> >
>>> > Please let me know if you need any further details.
>>
>> Abhilash, could you provide more details (like relevant output from
>> dmesg) and point me a list of patches which shall I apply to test this
>> issue on Exynos4/5?
> Sorry, I have not had the time to re-check this and provide you with
> the current temperature register value. I will definitely do so on
> Monday and also provide you the dmesg output. I applied the following
> patches on linux-next:
>
> bbf872d thermal: exynos: Add TMU support for Exynos7 SoC
> b8190ac dts: Documentation: Add documentation for Exynos7 SoC thermal bindings
> 9330ec1 thermal: exynos: Reorder exynos_map_dt_data() function
> 4dd41c4 thermal: exynos: dts: Provide device tree bindings identical
> to the one in exynos_tmu_data.c
> a7b80b9 thermal: dts: exynos: Trip points and sensor configuration
> data for Exynos5440
> 77d072e thermal: exynos: dts: Define default thermal-zones for Exynos4
> 964dd36 thermal: dts: Default trip points definition for Exynos5420 SoCs
> c1d2f97 thermal: exynos: dts: Add default definition of the TMU sensor
> parameter
> 02a4496 arm: dts: Adding CPU cooling binding for Exynos SoCs
> bfadff0 arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3 device
> 862764c arm: dts: odroid: Add LDO10 regulator node necessary for TMU on Odroid
> c064731 arm: dts: trats: Enable TMU on the Exynos4210 trats device
>
> Along with the above list I have a patch which adds the dt changes
> required for exynos7 on similar lines as done for exynos4/exynos5. In
> the exyno7 trip point dts file I have modified the cpu-crit-0
> temperature to a low value of 55C for testing purposes.
>
>>
>>>
>>> What is the status of this patch? Is it still required?
>>
>> It is strange, since on Exynos4/5 this works and some problems show up
>> when run on Exynos7.
>
> I would have expected the issue to show up on Exynos4/5 too. I will
> test this on the 5420 based board I have on Monday.
I tested this on a 5420 based chromebook that I have (Peach Pit) and
observed similar results as that on Exynos7. Following are the patches
applied on next-20150130:
5b1194d thermal: exynos: Reorder exynos_map_dt_data() function
30c6165 thermal: exynos: dts: Provide device tree bindings identical
to the one in exynos_tmu_data.c
d94c248 thermal: dts: exynos: Trip points and sensor configuration
data for Exynos5440
aac8b3a thermal: exynos: dts: Define default thermal-zones for Exynos4
5e8cf52 thermal: dts: Default trip points definition for Exynos5420 SoCs
17ec9c2 thermal: exynos: dts: Add default definition of the TMU sensor parameter
36e247b arm: dts: Adding CPU cooling binding for Exynos SoCs
7aa1bb1 arm: dts: odroid: Enable TMU at Exynos4412 based Odroid U3 device
8884a76 arm: dts: odroid: Add LDO10 regulator node necessary for TMU on Odroid
aae2e51 arm: dts: trats: Enable TMU on the Exynos4210 trats device
827e3bd Add linux-next specific files for 20150130
On top of these patches, I have the following diff for
debugging/testing pruposes:
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index 09d6c56..ac8b6a0 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -13,22 +13,22 @@ polling-delay-passive = <0>;
polling-delay = <0>;
trips {
cpu-alert-0 {
- temperature = <85000>; /* millicelsius */
+ temperature = <55000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-1 {
- temperature = <103000>; /* millicelsius */
+ temperature = <63000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-alert-2 {
- temperature = <110000>; /* millicelsius */
+ temperature = <70000>; /* millicelsius */
hysteresis = <10000>; /* millicelsius */
type = "active";
};
cpu-crit-0 {
- temperature = <1200000>; /* millicelsius */
+ temperature = <75000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
diff --git a/drivers/thermal/samsung/exynos_tmu.c
b/drivers/thermal/samsung/exynos_tmu.c
index 852e622..7281581 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -237,6 +237,7 @@ static int code_to_temp(struct exynos_tmu_data
*data, u8 temp_code)
break;
case TYPE_ONE_POINT_TRIMMING:
temp = temp_code - data->temp_error1 + pdata->first_point_trim;
+ printk("temp_code is %d, err1 is %d, trim is %d, temp
is %d\n", temp_code, data->temp_error1, pdata->first_point_trim,
temp);
break;
default:
temp = temp_code - pdata->default_temp_offset;
@@ -585,6 +586,7 @@ static int exynos_get_temp(void *p, long *temp)
*temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
+ printk("temperature is %ld\n", *temp);
clk_disable(data->clk);
mutex_unlock(&data->lock);
@@ -675,6 +677,7 @@ static int exynos4210_tmu_read(struct exynos_tmu_data *data)
static int exynos4412_tmu_read(struct exynos_tmu_data *data)
{
+ printk("\n%s: Reading the current temperature register value:
0x%x\n\n", __func__, readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP));
return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
}
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 48491d1..981fc99 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -469,7 +469,7 @@ static void update_temperature(struct
thermal_zone_device *tz)
mutex_unlock(&tz->lock);
trace_thermal_temperature(tz);
- dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
+ dev_err(&tz->device, "last_temperature=%d, current_temperature=%d\n",
tz->last_temperature, tz->temperature);
}
Also, I noticed a typo (an extra zero) in cpu-crit-0 temperature above.
Following is the relevant boot-up log:
[ 3.160126] TPS65090_RAILSLDO2: supplied by vbat-supply
[ 3.343421] thermal thermal_zone5: last_temperature=0,
current_temperature=25900
[ 3.349365] sbs-battery 20-000b: sbs-battery: battery gas gauge
device registered
[ 3.374280] 10060000.tmu supply vtmu not found, using dummy regulator
[ 3.379408]
[ 3.379408] exynos4412_tmu_read: Reading the current temperature
register value: 0x36
[ 3.379408]
[ 3.390026] temp_code is 54, err1 is 0, trim is 25, temp is 79
[ 3.395827] temperature is 79000
[ 3.399053] thermal thermal_zone0: last_temperature=0,
current_temperature=79000
[ 3.406429] thermal thermal_zone0: critical temperature reached(79
C),shutting down
[ 3.414241] reboot: Failed to start orderly shutdown: forcing the issue
[ 3.420690] usb 5-1: new high-speed USB device number 2 using exynos-ehci
[ 3.427819] 10064000.tmu supply vtmu not found, using dummy regulator
[ 3.434011] Emergency Sync complete
[ 3.434355]
[ 3.434355] exynos4412_tmu_read: Reading the current temperature
register value: 0x3
[ 3.434355]
[ 3.434367] temp_code is 3, err1 is 0, trim is 25, temp is 28
[ 3.434373] temperature is 28000
[ 3.434393] thermal thermal_zone1: last_temperature=0,
current_temperature=28000
[ 3.434744] 10068000.tmu supply vtmu not found, using dummy regulator
[ 3.435069]
[ 3.435069] exynos4412_tmu_read: Reading the current temperature
register value: 0x2
[ 3.435069]
[ 3.435080] temp_code is 2, err1 is 0, trim is 25, temp is 27
[ 3.435086] temperature is 27000
[ 3.435103] thermal thermal_zone2: last_temperature=0,
current_temperature=27000
[ 3.435427] 1006c000.tmu supply vtmu not found, using dummy regulator
[ 3.435762]
[ 3.435762] exynos4412_tmu_read: Reading the current temperature
register value: 0x2
[ 3.435762]
[ 3.435772] temp_code is 2, err1 is 0, trim is 25, temp is 27
[ 3.435778] temperature is 27000
[ 3.435794] thermal thermal_zone3: last_temperature=0,
current_temperature=27000
[ 3.436112] 100a0000.tmu supply vtmu not found, using dummy regulator
[ 3.436464]
[ 3.436464] exynos4412_tmu_read: Reading the current temperature
register value: 0x33
[ 3.436464]
[ 3.436475] temp_code is 51, err1 is 0, trim is 25, temp is 76
[ 3.436480] temperature is 76000
[ 3.436496] thermal thermal_zone4: last_temperature=0,
current_temperature=76000
[ 3.436527] thermal thermal_zone4: critical temperature reached(76
C),shutting down
>From the log, thermal_zone0 and thermal_zone4 show incorrect
temperatures. It looks like the first point trim error1 would need to
be intialized before we do a read ?
Please let me know if you need any more details.
Regards,
Abhilash
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
