Hi Lukasz,
On Wed, Feb 4, 2015 at 4:06 PM, Lukasz Majewski <l.majew...@samsung.com> wrote:
> Hi Abhilash,
>
>> Hi Lukasz,
>>
>> On Fri, Jan 30, 2015 at 8:36 PM, Abhilash Kesavan
>> <kesavan.abhil...@gmail.com> wrote:
>> > Hi Lukasz,
>> >
>> > On Fri, Jan 30, 2015 at 1:44 PM, Lukasz Majewski
>> > <l.majew...@samsung.com> wrote:
>> >> Hi Eduardo, Abhilash,
>> >>
>> >>> On Thu, Jan 22, 2015 at 06:02:07PM +0530, Abhilash Kesavan wrote:
>> >>> > Hi Lukasz,
>> >>> >
>> >>> > On Thu, Jan 22, 2015 at 2:31 PM, Lukasz Majewski
>> >>> > <l.majew...@samsung.com> wrote:
>> >>> > > Hi Abhilash,
>> >>> > >
>> >>> > >> Hi Lukasz,
>> >>> > >>
>> >>> > >> On Mon, Jan 19, 2015 at 5:14 PM, Lukasz Majewski
>> >>> > >> <l.majew...@samsung.com> wrote:
>> >>> > >> > The exynos_map_dt_data() function must be called before
>> >>> > >> > thermal_zone_of_sensor_register(), and hence provide
>> >>> > >> > tmu_read() function, before it is needed.
>> >>> > >> >
>> >>> > >> > This change is driven by adding support for enabling
>> >>> > >> > thermal_zoneX when it is properly initialized.
>> >>> > >> >
>> >>> > >> > One can read the mode of operation
>> >>> > >> > at /sys/class/thermal/thermal_zone0/mode Such
>> >>> > >> > functionality was missing in the of-thermal.c code.
>> >>> > >> >
>> >>> > >> > Reported-by: Abhilash Kesavan <a.kesa...@samsung.com>
>> >>> > >> > Signed-off-by: Lukasz Majewski <l.majew...@samsung.com>
>> >>> > >> > ---
>> >>> > >> > drivers/thermal/samsung/exynos_tmu.c | 7 ++++---
>> >>> > >> > 1 file changed, 4 insertions(+), 3 deletions(-)
>> >>> > >> >
>> >>> > >> > diff --git a/drivers/thermal/samsung/exynos_tmu.c
>> >>> > >> > b/drivers/thermal/samsung/exynos_tmu.c index
>> >>> > >> > 9d2d685..5d946ab 100644 ---
>> >>> > >> > a/drivers/thermal/samsung/exynos_tmu.c +++
>> >>> > >> > b/drivers/thermal/samsung/exynos_tmu.c @@ -975,15 +975,16
>> >>> > >> > @@ static int exynos_tmu_probe(struct platform_device
>> >>> > >> > *pdev) platform_set_drvdata(pdev, data);
>> >>> > >> > mutex_init(&data->lock);
>> >>> > >> >
>> >>> > >> > + ret = exynos_map_dt_data(pdev);
>> >>> > >> > + if (ret)
>> >>> > >> > + goto err_sensor;
>> >>> > >> > +
>> >>> > >> > data->tzd =
>> >>> > >> > thermal_zone_of_sensor_register(&pdev->dev, 0, data,
>> >>> > >> > &exynos_sensor_ops); if (IS_ERR(data->tzd)) {
>> >>> > >> > pr_err("thermal: tz: %p ERROR\n",
>> >>> > >> > data->tzd); return PTR_ERR(data->tzd);
>> >>> > >> > }
>> >>> > >> > - ret = exynos_map_dt_data(pdev);
>> >>> > >> > - if (ret)
>> >>> > >> > - goto err_sensor;
>> >>> > >> >
>> >>> > >> > pdata = data->pdata;
>> >>> > >>
>> >>> > >> I have been testing this along with your v5 patch set and am
>> >>> > >> seeing incorrect temperature being reported at boot-up on
>> >>> > >> exynos7.
>> >>> > >
>> >>> > > Does it show a maximal temperature value (0x1FF)?
>> >>> >
>> >>> > I did not print the current temperature register, but I
>> >>> > remember the message showing ~105C. Will give you the register
>> >>> > value when I test with more debug prints tomorrow.
>> >>> >
>> >>> > >
>> >>> > >> It looks
>> >>> > >> like exynos_tmu_read gets called from
>> >>> > >> thermal_zone_of_device_update during boot-up, now that we
>> >>> > >> have it populated early. However, as the tmu initialization
>> >>> > >> function has not been called yet it returns a wrong value.
>> >>> > >> Does that sound correct ?
>> >>> > >
>> >>> > > No, this is a mistake. However, I'm wondering why on Exynos4/5
>> >>> > > this error didn't show up...
>> >>> >
>> >>> > I have been lowering the software trip point temperature in the
>> >>> > exynos7 dts file (to 55C) for testing purposes. Hence, when the
>> >>> > temperature is read incorrectly as ~105C the board trips at
>> >>> > boot-up
>> >>
>> >> ^^^^ this is a very unusual
>> >> value - I had problems with
>> >> reading 0xFF values with
>> >> similar symptom (but this
>> >> was caused by lack of vtmu).
>> >>
>> >>> > itself. Maybe for exynos4/5 the incorrect value read during
>> >>> > boot-up is in the non-tripping range and once the tmu is
>> >>> > initialized later it continues to function properly thereafter ?
>> >>> >
>> >>> > >
>> >>> > > The reordering is needed to be able to call set_mode callback
>> >>> > > at of-thermal.c to set the mode.
>> >>> > >
>> >>> > > If this change causes problems, then another solution
>> >>> > > (probably not so neat) must be found.
>> >>> >
>> >>> > Please let me know if you need any further details.
>> >>
>> >> Abhilash, could you provide more details (like relevant output from
>> >> dmesg) and point me a list of patches which shall I apply to test
>> >> this issue on Exynos4/5?
>> > Sorry, I have not had the time to re-check this and provide you with
>> > the current temperature register value. I will definitely do so on
>> > Monday and also provide you the dmesg output. I applied the
>> > following patches on linux-next:
>> >
>> > bbf872d thermal: exynos: Add TMU support for Exynos7 SoC
>> > b8190ac dts: Documentation: Add documentation for Exynos7 SoC
>> > thermal bindings 9330ec1 thermal: exynos: Reorder
>> > exynos_map_dt_data() function 4dd41c4 thermal: exynos: dts: Provide
>> > device tree bindings identical to the one in exynos_tmu_data.c
>> > a7b80b9 thermal: dts: exynos: Trip points and sensor configuration
>> > data for Exynos5440
>> > 77d072e thermal: exynos: dts: Define default thermal-zones for
>> > Exynos4 964dd36 thermal: dts: Default trip points definition for
>> > Exynos5420 SoCs c1d2f97 thermal: exynos: dts: Add default
>> > definition of the TMU sensor parameter 02a4496 arm: dts: Adding CPU
>> > cooling binding for Exynos SoCs bfadff0 arm: dts: odroid: Enable
>> > TMU at Exynos4412 based Odroid U3 device 862764c arm: dts: odroid:
>> > Add LDO10 regulator node necessary for TMU on Odroid c064731 arm:
>> > dts: trats: Enable TMU on the Exynos4210 trats device
>> >
>> > Along with the above list I have a patch which adds the dt changes
>> > required for exynos7 on similar lines as done for exynos4/exynos5.
>> > In the exyno7 trip point dts file I have modified the cpu-crit-0
>> > temperature to a low value of 55C for testing purposes.
>> >
>> >>
>> >>>
>> >>> What is the status of this patch? Is it still required?
>> >>
>> >> It is strange, since on Exynos4/5 this works and some problems
>> >> show up when run on Exynos7.
>> >
>> > I would have expected the issue to show up on Exynos4/5 too. I will
>> > test this on the 5420 based board I have on Monday.
>>
>> I tested this on a 5420 based chromebook that I have (Peach Pit) and
>> observed similar results as that on Exynos7. Following are the patches
>> applied on next-20150130:
>>
>> 5b1194d thermal: exynos: Reorder exynos_map_dt_data() function
>> 30c6165 thermal: exynos: dts: Provide device tree bindings identical
>> to the one in exynos_tmu_data.c
>> d94c248 thermal: dts: exynos: Trip points and sensor configuration
>> data for Exynos5440
>> aac8b3a thermal: exynos: dts: Define default thermal-zones for Exynos4
>> 5e8cf52 thermal: dts: Default trip points definition for Exynos5420
>> SoCs 17ec9c2 thermal: exynos: dts: Add default definition of the TMU
>> sensor parameter 36e247b arm: dts: Adding CPU cooling binding for
>> Exynos SoCs 7aa1bb1 arm: dts: odroid: Enable TMU at Exynos4412 based
>> Odroid U3 device 8884a76 arm: dts: odroid: Add LDO10 regulator node
>> necessary for TMU on Odroid aae2e51 arm: dts: trats: Enable TMU on
>> the Exynos4210 trats device 827e3bd Add linux-next specific files for
>> 20150130
>>
>> On top of these patches, I have the following diff for
>> debugging/testing pruposes:
>>
>> diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
>> b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
>> index 09d6c56..ac8b6a0 100644
>> --- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
>> @@ -13,22 +13,22 @@ polling-delay-passive = <0>;
>> polling-delay = <0>;
>> trips {
>> cpu-alert-0 {
>> - temperature = <85000>; /* millicelsius */
>> + temperature = <55000>; /* millicelsius */
>> hysteresis = <10000>; /* millicelsius */
>> type = "active";
>> };
>> cpu-alert-1 {
>> - temperature = <103000>; /* millicelsius */
>> + temperature = <63000>; /* millicelsius */
>> hysteresis = <10000>; /* millicelsius */
>> type = "active";
>> };
>> cpu-alert-2 {
>> - temperature = <110000>; /* millicelsius */
>> + temperature = <70000>; /* millicelsius */
>> hysteresis = <10000>; /* millicelsius */
>> type = "active";
>> };
>> cpu-crit-0 {
>> - temperature = <1200000>; /* millicelsius */
>> + temperature = <75000>; /* millicelsius */
>> hysteresis = <0>; /* millicelsius */
>> type = "critical";
>> };
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c
>> b/drivers/thermal/samsung/exynos_tmu.c
>> index 852e622..7281581 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -237,6 +237,7 @@ static int code_to_temp(struct exynos_tmu_data
>> *data, u8 temp_code)
>> break;
>> case TYPE_ONE_POINT_TRIMMING:
>> temp = temp_code - data->temp_error1 +
>> pdata->first_point_trim;
>> + printk("temp_code is %d, err1 is %d, trim is %d, temp
>> is %d\n", temp_code, data->temp_error1, pdata->first_point_trim,
>> temp);
>> break;
>> default:
>> temp = temp_code - pdata->default_temp_offset;
>> @@ -585,6 +586,7 @@ static int exynos_get_temp(void *p, long *temp)
>>
>> *temp = code_to_temp(data, data->tmu_read(data)) * MCELSIUS;
>>
>> + printk("temperature is %ld\n", *temp);
>> clk_disable(data->clk);
>> mutex_unlock(&data->lock);
>>
>> @@ -675,6 +677,7 @@ static int exynos4210_tmu_read(struct
>> exynos_tmu_data *data)
>>
>> static int exynos4412_tmu_read(struct exynos_tmu_data *data)
>> {
>> + printk("\n%s: Reading the current temperature register value:
>> 0x%x\n\n", __func__, readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP));
>> return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
>> }
>>
>> diff --git a/drivers/thermal/thermal_core.c
>> b/drivers/thermal/thermal_core.c index 48491d1..981fc99 100644
>> --- a/drivers/thermal/thermal_core.c
>> +++ b/drivers/thermal/thermal_core.c
>> @@ -469,7 +469,7 @@ static void update_temperature(struct
>> thermal_zone_device *tz)
>> mutex_unlock(&tz->lock);
>>
>> trace_thermal_temperature(tz);
>> - dev_dbg(&tz->device, "last_temperature=%d,
>> current_temperature=%d\n",
>> + dev_err(&tz->device, "last_temperature=%d,
>> current_temperature=%d\n", tz->last_temperature, tz->temperature);
>> }
>>
>> Also, I noticed a typo (an extra zero) in cpu-crit-0 temperature
>> above.
>>
>> Following is the relevant boot-up log:
>>
>> [ 3.160126] TPS65090_RAILSLDO2: supplied by vbat-supply
>> [ 3.343421] thermal thermal_zone5: last_temperature=0,
>> current_temperature=25900
>> [ 3.349365] sbs-battery 20-000b: sbs-battery: battery gas gauge
>> device registered
>> [ 3.374280] 10060000.tmu supply vtmu not found, using dummy
>> regulator [ 3.379408]
>> [ 3.379408] exynos4412_tmu_read: Reading the current temperature
>> register value: 0x36
>> [ 3.379408]
>> [ 3.390026] temp_code is 54, err1 is 0, trim is 25, temp is 79
>> [ 3.395827] temperature is 79000
>> [ 3.399053] thermal thermal_zone0: last_temperature=0,
>> current_temperature=79000
>> [ 3.406429] thermal thermal_zone0: critical temperature reached(79
>> C),shutting down
>> [ 3.414241] reboot: Failed to start orderly shutdown: forcing the
>> issue [ 3.420690] usb 5-1: new high-speed USB device number 2
>> using exynos-ehci [ 3.427819] 10064000.tmu supply vtmu not found,
>> using dummy regulator [ 3.434011] Emergency Sync complete
>> [ 3.434355]
>> [ 3.434355] exynos4412_tmu_read: Reading the current temperature
>> register value: 0x3
>> [ 3.434355]
>> [ 3.434367] temp_code is 3, err1 is 0, trim is 25, temp is 28
>> [ 3.434373] temperature is 28000
>> [ 3.434393] thermal thermal_zone1: last_temperature=0,
>> current_temperature=28000
>> [ 3.434744] 10068000.tmu supply vtmu not found, using dummy
>> regulator [ 3.435069]
>> [ 3.435069] exynos4412_tmu_read: Reading the current temperature
>> register value: 0x2
>> [ 3.435069]
>> [ 3.435080] temp_code is 2, err1 is 0, trim is 25, temp is 27
>> [ 3.435086] temperature is 27000
>> [ 3.435103] thermal thermal_zone2: last_temperature=0,
>> current_temperature=27000
>> [ 3.435427] 1006c000.tmu supply vtmu not found, using dummy
>> regulator [ 3.435762]
>> [ 3.435762] exynos4412_tmu_read: Reading the current temperature
>> register value: 0x2
>> [ 3.435762]
>> [ 3.435772] temp_code is 2, err1 is 0, trim is 25, temp is 27
>> [ 3.435778] temperature is 27000
>> [ 3.435794] thermal thermal_zone3: last_temperature=0,
>> current_temperature=27000
>> [ 3.436112] 100a0000.tmu supply vtmu not found, using dummy
>> regulator [ 3.436464]
>> [ 3.436464] exynos4412_tmu_read: Reading the current temperature
>> register value: 0x33
>> [ 3.436464]
>> [ 3.436475] temp_code is 51, err1 is 0, trim is 25, temp is 76
>> [ 3.436480] temperature is 76000
>> [ 3.436496] thermal thermal_zone4: last_temperature=0,
>> current_temperature=76000
>> [ 3.436527] thermal thermal_zone4: critical temperature reached(76
>> C),shutting down
>>
>> From the log, thermal_zone0 and thermal_zone4 show incorrect
>> temperatures. It looks like the first point trim error1 would need to
>> be intialized before we do a read ?
>
> Could you check if this error happens when you have default temp
> threshold values?
No, it does not. The default thresholds on 5420 have the alerts
starting at 85C. The incorrect temperature read is in the range of
74-78C for 5420 and so with the default thresholds no trip occurs.
Once the tmu is properly initialized in the probe function, the error
will anyway not occur.
>
> It is strange, that only this exceeded temp happens for thermal zone 0
> and 4. Other three show correct temp.
>
> Off topic - where are placed those two misbehaving zones? Isn't thermal
> zone 4 the one for GPU?
Yes, zone4 is for the GPU.
On the arndale octa, if you reduce the thresholds do you see the same
behavior I observe ? or can you just add the debug prints that I have
been using and see what temperature is being reported initially on the
arndale octa board you have.
Thanks,
Abhilash
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
