On 24.08.2015 20:05, Alim Akhtar wrote:
> This patch fixes some of the bit field and
> update the TOPC block clock as per the latest UM.
Description is not entirely correct. The "ENABLE_ACLK_TOPC1" register
was present already both in driver and in first user manual. That means
it was just forgotten to be saved/restored during sleep. There is no
update for manual because manual did not change anything.
The same for widths of bit fields - the 0.00 manual specifies them as 4
bit wide. Where is the change from latest UM?
Please describe the change as it is - clock driver was bogus and has to
be fixed :) .
Best regards,
Krzysztof
>
> Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
> ---
> drivers/clk/samsung/clk-exynos7.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos7.c
> b/drivers/clk/samsung/clk-exynos7.c
> index 03d36e8..cbf1bd2 100644
> --- a/drivers/clk/samsung/clk-exynos7.c
> +++ b/drivers/clk/samsung/clk-exynos7.c
> @@ -87,6 +87,7 @@ static unsigned long topc_clk_regs[] __initdata = {
> DIV_TOPC0,
> DIV_TOPC1,
> DIV_TOPC3,
> + ENABLE_ACLK_TOPC1,
> };
>
> static struct samsung_mux_clock topc_mux_clks[] __initdata = {
> @@ -104,9 +105,9 @@ static struct samsung_mux_clock topc_mux_clks[]
> __initdata = {
> MUX(0, "mout_sclk_mfc_pll_cmuc", mout_sclk_mfc_pll_cmuc_p,
> MUX_SEL_TOPC0, 28, 1),
>
> + MUX(0, "mout_aud_pll_ctrl", mout_aud_pll_ctrl_p, MUX_SEL_TOPC1, 0, 1),
> MUX(0, "mout_sclk_bus0_pll_out", mout_sclk_bus0_pll_out_p,
> MUX_SEL_TOPC1, 16, 1),
> - MUX(0, "mout_aud_pll_ctrl", mout_aud_pll_ctrl_p, MUX_SEL_TOPC1, 0, 1),
>
> MUX(0, "mout_aclk_ccore_133", mout_topc_group2, MUX_SEL_TOPC2, 4, 2),
>
> @@ -116,7 +117,7 @@ static struct samsung_mux_clock topc_mux_clks[]
> __initdata = {
>
> static struct samsung_div_clock topc_div_clks[] __initdata = {
> DIV(DOUT_ACLK_CCORE_133, "dout_aclk_ccore_133", "mout_aclk_ccore_133",
> - DIV_TOPC0, 4, 4),
> + DIV_TOPC0, 4, 5),
>
> DIV(DOUT_ACLK_MSCL_532, "dout_aclk_mscl_532", "mout_aclk_mscl_532",
> DIV_TOPC1, 20, 4),
> @@ -124,15 +125,15 @@ static struct samsung_div_clock topc_div_clks[]
> __initdata = {
> DIV_TOPC1, 24, 4),
>
> DIV(DOUT_SCLK_BUS0_PLL, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out",
> - DIV_TOPC3, 0, 3),
> + DIV_TOPC3, 0, 4),
> DIV(DOUT_SCLK_BUS1_PLL, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl",
> - DIV_TOPC3, 8, 3),
> + DIV_TOPC3, 8, 4),
> DIV(DOUT_SCLK_CC_PLL, "dout_sclk_cc_pll", "mout_cc_pll_ctrl",
> - DIV_TOPC3, 12, 3),
> + DIV_TOPC3, 12, 4),
> DIV(DOUT_SCLK_MFC_PLL, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl",
> - DIV_TOPC3, 16, 3),
> + DIV_TOPC3, 16, 4),
> DIV(DOUT_SCLK_AUD_PLL, "dout_sclk_aud_pll", "mout_aud_pll_ctrl",
> - DIV_TOPC3, 28, 3),
> + DIV_TOPC3, 28, 4),
> };
>
> static struct samsung_pll_rate_table pll1460x_24mhz_tbl[] __initdata = {
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
