Hello Krzysztof,
On Tue, Aug 25, 2015 at 12:32 PM, Krzysztof Kozlowski
<k.kozlow...@samsung.com> wrote:
> On 24.08.2015 20:05, Alim Akhtar wrote:
>> This patch fixes some of the bit field and
>> update the TOPC block clock as per the latest UM.
>
> Description is not entirely correct. The "ENABLE_ACLK_TOPC1" register
> was present already both in driver and in first user manual. That means
> it was just forgotten to be saved/restored during sleep. There is no
> update for manual because manual did not change anything.
>
> The same for widths of bit fields - the 0.00 manual specifies them as 4
> bit wide. Where is the change from latest UM?
>
Thanks for your review, will update the commit message and remove
ENABLE_ACLK_TOPC1 for now.
> Please describe the change as it is - clock driver was bogus and has to
> be fixed :) .
>
> Best regards,
> Krzysztof
>
>>
>> Signed-off-by: Alim Akhtar <alim.akh...@samsung.com>
>> ---
>> drivers/clk/samsung/clk-exynos7.c | 15 ++++++++-------
>> 1 file changed, 8 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/clk/samsung/clk-exynos7.c
>> b/drivers/clk/samsung/clk-exynos7.c
>> index 03d36e8..cbf1bd2 100644
>> --- a/drivers/clk/samsung/clk-exynos7.c
>> +++ b/drivers/clk/samsung/clk-exynos7.c
>> @@ -87,6 +87,7 @@ static unsigned long topc_clk_regs[] __initdata = {
>> DIV_TOPC0,
>> DIV_TOPC1,
>> DIV_TOPC3,
>> + ENABLE_ACLK_TOPC1,
>> };
>>
>> static struct samsung_mux_clock topc_mux_clks[] __initdata = {
>> @@ -104,9 +105,9 @@ static struct samsung_mux_clock topc_mux_clks[]
>> __initdata = {
>> MUX(0, "mout_sclk_mfc_pll_cmuc", mout_sclk_mfc_pll_cmuc_p,
>> MUX_SEL_TOPC0, 28, 1),
>>
>> + MUX(0, "mout_aud_pll_ctrl", mout_aud_pll_ctrl_p, MUX_SEL_TOPC1, 0, 1),
>> MUX(0, "mout_sclk_bus0_pll_out", mout_sclk_bus0_pll_out_p,
>> MUX_SEL_TOPC1, 16, 1),
>> - MUX(0, "mout_aud_pll_ctrl", mout_aud_pll_ctrl_p, MUX_SEL_TOPC1, 0, 1),
>>
>> MUX(0, "mout_aclk_ccore_133", mout_topc_group2, MUX_SEL_TOPC2, 4, 2),
>>
>> @@ -116,7 +117,7 @@ static struct samsung_mux_clock topc_mux_clks[]
>> __initdata = {
>>
>> static struct samsung_div_clock topc_div_clks[] __initdata = {
>> DIV(DOUT_ACLK_CCORE_133, "dout_aclk_ccore_133", "mout_aclk_ccore_133",
>> - DIV_TOPC0, 4, 4),
>> + DIV_TOPC0, 4, 5),
>>
>> DIV(DOUT_ACLK_MSCL_532, "dout_aclk_mscl_532", "mout_aclk_mscl_532",
>> DIV_TOPC1, 20, 4),
>> @@ -124,15 +125,15 @@ static struct samsung_div_clock topc_div_clks[]
>> __initdata = {
>> DIV_TOPC1, 24, 4),
>>
>> DIV(DOUT_SCLK_BUS0_PLL, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out",
>> - DIV_TOPC3, 0, 3),
>> + DIV_TOPC3, 0, 4),
>> DIV(DOUT_SCLK_BUS1_PLL, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl",
>> - DIV_TOPC3, 8, 3),
>> + DIV_TOPC3, 8, 4),
>> DIV(DOUT_SCLK_CC_PLL, "dout_sclk_cc_pll", "mout_cc_pll_ctrl",
>> - DIV_TOPC3, 12, 3),
>> + DIV_TOPC3, 12, 4),
>> DIV(DOUT_SCLK_MFC_PLL, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl",
>> - DIV_TOPC3, 16, 3),
>> + DIV_TOPC3, 16, 4),
>> DIV(DOUT_SCLK_AUD_PLL, "dout_sclk_aud_pll", "mout_aud_pll_ctrl",
>> - DIV_TOPC3, 28, 3),
>> + DIV_TOPC3, 28, 4),
>> };
>>
>> static struct samsung_pll_rate_table pll1460x_24mhz_tbl[] __initdata = {
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc"
> in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
