Doug Ledford <[EMAIL PROTECTED]> wrote:
: Likely you will need driver version 5.1.18 or above for this controller. The
: 5.1.19 driver version is already in the 2.2.11 and above kernels.
I took that one, but my disks are still 40 MByte/s recognized. I checked the
BIOS too. What is strange is that any device I tried (cheetah, old
non u2 DDRS) is reported by the BIOS as ULTRA2/SE.
Which is an impossible combination.
I will exchange the terminator, and then maybe try a BIOS upgrade.
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
