Hi everybody, (sorry for the grammar, i'm just french)
I've saw your mailling-list in a scsi howto, and maybe you could answer
to my problem :
i use the Mandrake Distribution which is like Redhat but with some docs
for french;
and i've just installed a Pioneer DVD-ROM and my kernel does'nt
recognize it.
a part of my dmesg is the following
(scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 9/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 407 instructions downloaded
(scsi1) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at PCI 11/0
(scsi1) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 407 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4
<Adaptec AHA-294X Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.10/3.2.4
<Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
scsi : 2 hosts.
Vendor: PIONEER Model: DVD-ROM DVD-303 Rev: 1.09
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:0:2:0) Synchronous at 20.0 Mbyte/sec, offset 8.
Vendor: ARCHIVE Model: Python 04106-XXX Rev: 7350
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:0:6:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: QUANTUM Model: ATLAS IV 9 WLS Rev: 0707
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
(scsi1:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
Vendor: QUANTUM Model: ATLAS IV 9 WLS Rev: 0707
Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0
(scsi1:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31.
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783249 [8683 MB]
[8.7 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783249 [8683 MB]
[8.7 GB]
Partition check:
sda: sda1 sda2 sda3 sda4
sdb: sdb1 sdb3 sdb4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 52k freed
Adding Swap: 530140k swap-space (priority -1)
REGISTER_DEV sda4 to md0 done
REGISTER_DEV sdb4 to md0 done
raid0 : Allocating 8 bytes for hash.
st: bufsize 32768, wrt 30720, max buffers 4, s/g segs 16.
Detected scsi tape st0 at scsi0, channel 0, id 6, lun 0
Does my dmesg say me which dev(for example scd0) i should use ???
Because when i do : mount /dev/scd0 -t iso9660 /mnt/dvdrom, i have :
mount: the kernel does not recognize /dev/scd0 as a block device
(maybe `insmod driver'?)
So i don't know what doing
Thanks for the help,
Pierre-Yves DESLANDES
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
