Tried again (with SuSE CDs in slots 4 and 5), and thsi time tried to
mount slot five first. /var/log/messages:
Vendor: LASOUND Model: CDX7405 Rev: 3.10
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LASOUND Model: CDX7405 Rev: 3.10
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LASOUND Model: CDX7405 Rev: 3.10
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LASOUND Model: CDX7405 Rev: 3.10
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LASOUND Model: CDX7405 Rev: 3.10
Type: CD-ROM ANSI SCSI revision: 02
scsi0: Target 3: Queue Depth 3, Synchronous at 3.33 MB/sec, offset 8
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
Detected scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 1
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 3, lun 2
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 3, lun 3
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 3, lun 4
sr0: scsi3-mmc drive: 0x/0x caddy
sr1: scsi3-mmc drive: 0x/0x caddy
sr2: scsi3-mmc drive: 0x/0x caddy
sr3: CDROM (ioctl) error, command: Mode Sense 60 2a 00 80 00
[valid=0] Info fld=0x0, Current sr00:00: sense key Hardware Error
Additional sense indicates Mechanical positioning error
sr3: scsi3-mmc drive: 0x/0x caddy
sr4: CDROM (ioctl) error, command: Mode Sense 80 2a 00 80 00
[valid=0] Info fld=0x0, Current sr00:00: sense key Hardware Error
Additional sense indicates Mechanical positioning error
sr4: scsi3-mmc drive: 0x/0x caddy
sr4: CDROM (ioctl) error, command: Test Unit Ready 80 00 00 00 00
[valid=0] Info fld=0x0, Current sr00:00: sense key Hardware Error
Additional sense indicates Mechanical positioning error
cdrom: open failed.
scsi : aborting command due to timeout : pid 23, scsi0, channel 0, id 3, lun 4 Test
Unit Ready 80 00 00 00 00
scsi0: Aborting CCB #30 to Target 3
SCSI host 0 abort (pid 23) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
scsi0: Sending Bus Device Reset CCB #31 to Target 3
SCSI host 0 channel 0 reset (pid 23) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
scsi0: Resetting BusLogic BT-930 due to Target 3
scsi0: *** BusLogic BT-930 Initialized Successfully ***
sr4: CDROM (ioctl) error, command: Read TOC 80 00 00 00 00 00 00 0c 40
[valid=0] Info fld=0x0, Current sr00:00: sense key Hardware Error
Additional sense indicates Mechanical positioning error
sr4: CDROM (ioctl) error, command: Read TOC 80 00 00 00 00 00 00 0c 00
[valid=0] Info fld=0x0, Current sr00:00: sense key Hardware Error
Additional sense indicates Mechanical positioning error
So it looks like sr3 and sr4 are just toast. (mount returns "No medium found")
So do you think the drive is busted?
Brendan
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [EMAIL PROTECTED]
