On Fri, Mar 24, 2000 at 01:10:43PM +0100, Jordi Mallach wrote:
> > Try to get the information to which it is set under winXX (you mentioned
> > it's working there). Try the same values with Linux. Try a warmboot from
> > win into Linux, maybe the cardsettings survive. If the card shows up
> > then, try too figure out how to set the same without winXX (read
> > /proc/ioports /proc/interrupts etc. again).
>
> The warmboot is the only way I have managed to make that old card work. I'm
> not currently using that box a whole lot, so I can't really test further.
> The worst is that box does not dualboot anymore, so the warmboot is a bit
> more complicated now.
After this weekend's testing, I have not managed to find a lot more. I am
still able to get the card detected after a warm windows boot (I installed a
minimal windows on a temp partition), but using the same values after a hard
boot doesn't work. I'm really running out of ideas.
Ah, I changed the jumper setting in the card to see if that made pnpdump
happier, but it didn't. The jumper isn't labeled so I don't really know
anything about it. I'm attaching my dmesg, hope it helps.
Other people with this HP version of nrc53c400a have it working normally
without external OS's aid? If not, is there a solution for this?
Looking at the hp400a.inf in the window driver, I also found this:
[NormalOp]
; Primary Configuration
ConfigPriority = DESIRED
IOConfig=280-28f(3ff::),290-29f(3ff::),300-30f(3ff::),310-31f(3ff::),330-33f(3ff::),340-34f(3ff::),348-357(3ff::),350-35f(3ff::)
IRQConfig = 3,4,5,7,9
I don't think I can provide more info, sorry.
Jordi
--
Jordi Mallach P�rez || [EMAIL PROTECTED] || Rediscovering Freedom,
ka Oskuro in RL-MUD || [EMAIL PROTECTED] || Using Debian GNU/Linux
http://sindominio.net GnuPG public information: pub 1024D/917A225E
telnet pusa.uv.es 23 73ED 4244 FD43 5886 20AC 2644 2584 94BA 917A 225E
Linux version 2.2.10 (root@boira) (gcc version egcs-2.91.66 Debian GNU/Linux
(egcs-1.1.2 release)) #1 Wed Nov 17 00:57:17 CET 1999
Detected 132875124 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 53.04 BogoMIPS
Memory: 47192k/49152k available (792k kernel code, 412k reserved, 700k data, 56k init)
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfb1c0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:90
PCI: Enabling I/O for device 00:90
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
es1370: version v0.22 time 01:01:11 Nov 17 1999
es1370: found adapter at io 0x6000 irq 9
es1370: features: joystick on, line in, mic impedance 0
PIIX3: IDE controller on PCI bus 00 dev 39
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: ST36451A, ATA DISK drive
hdb: H3256-A3, ATA DISK drive
hdc: Pioneer CD-ROM ATAPI Model DR-A14S 0104, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST36451A, 6149MB w/448kB Cache, CHS=784/255/63
hdb: H3256-A3, 245MB w/96kB Cache, CHS=872/16/36
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 32124k swap-space (priority -1)
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0x5800, IRQ 10.
eth0: PCI NE2000 found at 0x5800, IRQ 10, 00:40:05:65:24:62.
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at port 0x290 interrupts disabled options CAN_QUEUE=16 CMD_PER_LUN=2
release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA USLEEP, USLEEP_POLL=1
USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
scsi : 0 hosts.
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at port 0x290 interrupts disabled options CAN_QUEUE=16 CMD_PER_LUN=2
release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA USLEEP, USLEEP_POLL=1
USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
scsi : 0 hosts.
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at port 0x290 interrupts disabled options CAN_QUEUE=16 CMD_PER_LUN=2
release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA USLEEP, USLEEP_POLL=1
USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
scsi : 0 hosts.
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at port 0x290 interrupts disabled options CAN_QUEUE=16 CMD_PER_LUN=2
release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA USLEEP, USLEEP_POLL=1
USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
scsi : 0 hosts.
scsi0 : interrupts not enabled. for better interactive performance,
scsi0 : please jumper the board for a free IRQ.
scsi0 : at port 0x290 interrupts disabled options CAN_QUEUE=16 CMD_PER_LUN=2
release=1 generic options AUTOPROBE_IRQ AUTOSENSE PSEUDO DMA USLEEP, USLEEP_POLL=1
USLEEP_SLEEP=20 generic release=7
scsi0 : Generic NCR5380/53C400 Driver
scsi : 1 host.
Vendor: HP Model: C1130A Rev: 3614
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
scsi : 0 hosts.
PGP signature
