Linux-Setup Digest #35, Volume #19 Thu, 29 Jun 00 11:13:14 EDT
Contents:
Re: Can't Boot from Compiled Kernel (2.2.13) ("Martin Fitzpatrick")
Re: lexmark 5700 printer drivers ("Martin Fitzpatrick")
Re: Can't Boot from Compiled Kernel (2.2.13) (smp root)
Re: i810 video card driver support in xfree86 4.0 (D G)
SVGA linux drivers ("news.polito.it")
Dual Boot - 2 Drives (Michael Garabaldi)
----------------------------------------------------------------------------
From: "Martin Fitzpatrick" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.hardware,comp.os.linux.misc
Subject: Re: Can't Boot from Compiled Kernel (2.2.13)
Date: Thu, 29 Jun 2000 15:30:02 +0100
Well, the obvious possibility is that your .config file is up a gum tree.
Did you change it (directly, with make config, make xconfig, etc.) before
compiling the new kernel ? I seem to remember that my kernel.HOWTO says
there a 'make config.old' or something similar which I think might be able
to pull out an old version of the .config file. Alternatively, if you still
have the /usr/scr/IBMMCA (or whatever) directory tree, how about pulling the
.config file out of there and trying again ?
Hope this help.
Regards,
Martin.
(These views are my own and nobody else's. Follow my advice at your own risk
!)
"mv" <[EMAIL PROTECTED]> wrote in message
news:395b3f69$[EMAIL PROTECTED]...
> I have been battling a wierd boot problem that has me stumped and wondered
> if anyone has a solution for this problem.
>
> The problem is that I can't boot from any kernel that I compile on the PC.
> However, I
> can boot from the IBMMCA.S kernel that came on the Slackware 7.0
> distribution.
>
> The symptoms I am experiencing are that the loader starts displaying the
> following line and then stops at a blank line below this when I select one
> of my
> compiled kernels at boot time:
>
> loading linux................................
>
> If I pick the IBMMCA.S kernel included at installation time, it boots
every
> time.
>
> I have tried various options in the lilo.conf file with no success. Below
> you will find
> the current /etc/lilo.conf and /usr/src/linux/.config files.
>
> My normal sequence for compiling the 2.2.13 kernel is:
>
> make dep
> make clean
> make bzlilo
> make modules
> make modules_install
>
>
> Any help you can provide is much appreciated.
>
> ============================
> /etc/lilo.conf
>
> # LILO configuration file
> # generated by 'liloconfig
> #
> # Start LILO global section
> boot = /dev/sda
> message = /boot/boot_message.txt
> prompt
> timeout = 300
> # Normal VGA console
> vga = normal
> linear
> append="mem=256M,noinitrd,mca-pentium"
> # End LILO global section
> # Linux bootable partition config begins
> image = /ibmmca
> root = /dev/sda2
> label = IBMMCA
> read-only
> # Linux bootable partition config ends
> # Linux bootable partition config begins
> image = /vmlinuz
> root = /dev/sda2
> label = Linux
> read-only
> # Linux bootable partition config ends
> ==================================
> /usr/src/linux/.config
>
> #
> # Automatically generated by make menuconfig: don't edit
> #
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # Processor type and features
> #
> CONFIG_M386=y
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M686 is not set
> CONFIG_1GB=y
> # CONFIG_2GB is not set
> CONFIG_MATH_EMULATION=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_QUIRKS=y
> # CONFIG_PCI_OPTIMIZE is not set
> CONFIG_PCI_OLD_PROC=y
> CONFIG_MCA=y
> # CONFIG_VISWS is not set
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=m
> CONFIG_BINFMT_JAVA=m
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_APM is not set
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> CONFIG_PNP_PARPORT=m
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> CONFIG_BLK_DEV_IDE=y
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_BLK_DEV_IDETAPE=m
> CONFIG_BLK_DEV_IDEFLOPPY=y
> CONFIG_BLK_DEV_IDESCSI=m
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> # CONFIG_BLK_DEV_IDEPCI is not set
> CONFIG_IDE_CHIPSETS=y
> CONFIG_BLK_DEV_4DRIVES=y
> # CONFIG_BLK_DEV_ALI14XX is not set
> # CONFIG_BLK_DEV_DTC2278 is not set
> # CONFIG_BLK_DEV_HT6560B is not set
> # CONFIG_BLK_DEV_QD6580 is not set
> # CONFIG_BLK_DEV_UMC8672 is not set
> # CONFIG_BLK_DEV_PDC4030 is not set
> CONFIG_BLK_DEV_PS2=y
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=y
> CONFIG_MD_STRIPED=y
> CONFIG_MD_MIRRORING=m
> CONFIG_MD_RAID5=m
> CONFIG_MD_BOOT=y
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_BLK_DEV_XD=m
> CONFIG_BLK_DEV_DAC960=m
> CONFIG_PARIDE_PARPORT=m
> CONFIG_PARIDE=m
> CONFIG_PARIDE_PD=m
> CONFIG_PARIDE_PCD=m
> CONFIG_PARIDE_PF=m
> CONFIG_PARIDE_PT=m
> CONFIG_PARIDE_PG=m
> CONFIG_PARIDE_ATEN=m
> CONFIG_PARIDE_BPCK=m
> CONFIG_PARIDE_COMM=m
> CONFIG_PARIDE_DSTR=m
> CONFIG_PARIDE_FIT2=m
> CONFIG_PARIDE_FIT3=m
> CONFIG_PARIDE_EPAT=m
> CONFIG_PARIDE_EPIA=m
> CONFIG_PARIDE_FRIQ=m
> CONFIG_PARIDE_FRPW=m
> CONFIG_PARIDE_KBIC=m
> CONFIG_PARIDE_KTTI=m
> CONFIG_PARIDE_ON20=m
> CONFIG_PARIDE_ON26=m
> CONFIG_BLK_CPQ_DA=m
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_NETLINK=y
> CONFIG_RTNETLINK=y
> CONFIG_NETLINK_DEV=m
> CONFIG_FIREWALL=y
> CONFIG_FILTER=y
> CONFIG_UNIX=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> CONFIG_IP_FIREWALL=y
> # CONFIG_IP_FIREWALL_NETLINK is not set
> CONFIG_IP_TRANSPARENT_PROXY=y
> CONFIG_IP_MASQUERADE=y
> CONFIG_IP_MASQUERADE_ICMP=y
> CONFIG_IP_MASQUERADE_MOD=y
> CONFIG_IP_MASQUERADE_IPAUTOFW=m
> CONFIG_IP_MASQUERADE_IPPORTFW=m
> CONFIG_IP_MASQUERADE_MFW=m
> # CONFIG_IP_ROUTER is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> # CONFIG_NET_IPGRE_BROADCAST is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_IP_ALIAS is not set
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_RARP=m
> # CONFIG_SKB_LARGE is not set
> CONFIG_IPV6=m
> CONFIG_IPV6_EUI64=y
> CONFIG_IPV6_NO_PB=y
> CONFIG_IPX=m
> # CONFIG_IPX_INTERN is not set
> CONFIG_SPX=m
> CONFIG_ATALK=m
> CONFIG_X25=m
> CONFIG_LAPB=m
> # CONFIG_BRIDGE is not set
> # CONFIG_LLC is not set
> CONFIG_ECONET=m
> # CONFIG_ECONET_AUNUDP is not set
> # CONFIG_ECONET_NATIVE is not set
> CONFIG_WAN_ROUTER=m
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> # CONFIG_CPU_IS_SLOW is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # SCSI support
> #
> CONFIG_SCSI=y
> CONFIG_BLK_DEV_SD=y
> CONFIG_CHR_DEV_ST=y
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_SCSI_MULTI_LUN is not set
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
>
> #
> # SCSI low-level drivers
> #
> CONFIG_SCSI_7000FASST=m
> CONFIG_SCSI_ACARD=m
> CONFIG_SCSI_AHA152X=m
> CONFIG_SCSI_AHA1542=y
> CONFIG_SCSI_AHA1740=m
> CONFIG_SCSI_AIC7XXX=m
> # CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
> # CONFIG_AIC7XXX_PROC_STATS is not set
> CONFIG_AIC7XXX_RESET_DELAY=5
> # CONFIG_SCSI_IPS is not set
> CONFIG_SCSI_ADVANSYS=m
> CONFIG_SCSI_IN2000=m
> CONFIG_SCSI_AM53C974=m
> CONFIG_SCSI_MEGARAID=m
> CONFIG_SCSI_BUSLOGIC=y
> # CONFIG_SCSI_OMIT_FLASHPOINT is not set
> CONFIG_SCSI_DTC3280=m
> CONFIG_SCSI_EATA=m
> # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
> # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
> CONFIG_SCSI_EATA_MAX_TAGS=16
> CONFIG_SCSI_EATA_DMA=m
> CONFIG_SCSI_EATA_PIO=m
> CONFIG_SCSI_FUTURE_DOMAIN=m
> CONFIG_SCSI_FD_MCS=y
> CONFIG_SCSI_GDTH=m
> CONFIG_SCSI_GENERIC_NCR5380=m
> CONFIG_SCSI_GENERIC_NCR53C400=y
> CONFIG_SCSI_G_NCR5380_PORT=y
> # CONFIG_SCSI_G_NCR5380_MEM is not set
> CONFIG_SCSI_INITIO=m
> CONFIG_SCSI_INIA100=m
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> CONFIG_SCSI_IZIP_EPP16=y
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> CONFIG_SCSI_NCR53C406A=m
> CONFIG_SCSI_SYM53C416=m
> # CONFIG_SCSI_SIM710 is not set
> CONFIG_SCSI_NCR53C7xx=y
> # CONFIG_SCSI_NCR53C7xx_sync is not set
> # CONFIG_SCSI_NCR53C7xx_FAST is not set
> # CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set
> CONFIG_SCSI_IBMMCA=y
> # CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not set
> # CONFIG_IBMMCA_SCSI_DEV_RESET is not set
> CONFIG_SCSI_MCA_53C9X=y
> CONFIG_SCSI_PAS16=m
> CONFIG_SCSI_PCI2000=m
> CONFIG_SCSI_PCI2220I=m
> CONFIG_SCSI_PSI240I=m
> CONFIG_SCSI_QLOGIC_FAS=m
> CONFIG_SCSI_QLOGIC_ISP=m
> CONFIG_SCSI_QLOGIC_FC=m
> CONFIG_SCSI_SEAGATE=m
> CONFIG_SCSI_DC390T=m
> # CONFIG_SCSI_DC390T_NOGENSUPP is not set
> CONFIG_SCSI_T128=m
> CONFIG_SCSI_U14_34F=m
> # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set
> CONFIG_SCSI_U14_34F_MAX_TAGS=8
> CONFIG_SCSI_ULTRASTOR=m
> CONFIG_SCSI_DEBUG=m
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> CONFIG_ARCNET=y
> # CONFIG_ARCNET_ETH is not set
> # CONFIG_ARCNET_1051 is not set
> CONFIG_ARCNET_COM90xx=y
> CONFIG_ARCNET_COM90xxIO=m
> CONFIG_ARCNET_RIM_I=m
> CONFIG_ARCNET_COM20020=m
> CONFIG_DUMMY=y
> CONFIG_EQUALIZER=m
> CONFIG_ETHERTAP=m
> CONFIG_NET_SB1000=m
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_EL1=m
> CONFIG_EL2=m
> CONFIG_ELPLUS=m
> CONFIG_EL16=m
> CONFIG_ELMC=y
> CONFIG_ELMC_II=y
> CONFIG_EL3=y
> CONFIG_3C515=m
> CONFIG_VORTEX=m
> CONFIG_LANCE=m
> CONFIG_NET_VENDOR_SMC=y
> CONFIG_WD80x3=y
> CONFIG_ULTRAMCA=y
> CONFIG_ULTRA=m
> CONFIG_ULTRA32=m
> CONFIG_SMC9194=m
> CONFIG_NET_VENDOR_RACAL=y
> CONFIG_NI5010=m
> CONFIG_NI52=m
> CONFIG_NI65=m
> CONFIG_RTL8139=m
> # CONFIG_SIS900 is not set
> CONFIG_YELLOWFIN=m
> CONFIG_NET_ISA=y
> CONFIG_AT1700=m
> CONFIG_E2100=m
> CONFIG_DEPCA=m
> CONFIG_EWRK3=m
> CONFIG_EEXPRESS=m
> CONFIG_EEXPRESS_PRO=m
> CONFIG_FMV18X=m
> CONFIG_HPLAN_PLUS=m
> CONFIG_HPLAN=m
> CONFIG_HP100=m
> CONFIG_ETH16I=m
> CONFIG_NE2000=m
> CONFIG_SEEQ8005=m
> # CONFIG_SK_G16 is not set
> CONFIG_NE2_MCA=y
> CONFIG_SKMC=y
> CONFIG_NET_EISA=y
> CONFIG_PCNET32=m
> CONFIG_ACENIC=m
> CONFIG_AC3200=m
> CONFIG_APRICOT=m
> CONFIG_CS89x0=m
> # CONFIG_DM9102 is not set
> CONFIG_DE4X5=m
> CONFIG_DEC_ELCP=m
> CONFIG_DGRS=m
> CONFIG_EEXPRESS_PRO100=m
> CONFIG_LNE390=m
> CONFIG_NE3210=m
> CONFIG_NE2K_PCI=m
> CONFIG_TLAN=m
> CONFIG_VIA_RHINE=m
> CONFIG_ES3210=m
> CONFIG_EPIC100=m
> # CONFIG_ZNET is not set
> CONFIG_NET_POCKET=y
> # CONFIG_ATP is not set
> CONFIG_DE600=m
> CONFIG_DE620=m
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
>
> #
> # Appletalk devices
> #
> CONFIG_LTPC=m
> CONFIG_COPS=m
> # CONFIG_COPS_DAYNA is not set
> # CONFIG_COPS_TANGENT is not set
> CONFIG_IPDDP=m
> # CONFIG_IPDDP_ENCAP is not set
> # CONFIG_IPDDP_DECAP is not set
> CONFIG_PLIP=m
> CONFIG_PPP=m
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLIP_SMART=y
> # CONFIG_SLIP_MODE_SLIP6 is not set
> CONFIG_NET_RADIO=y
> CONFIG_STRIP=m
> CONFIG_WAVELAN=m
> CONFIG_ARLAN=m
>
> #
> # Token ring devices
> #
> CONFIG_TR=y
> CONFIG_IBMTR=y
> CONFIG_IBMOL=y
> CONFIG_SKTR=y
> # CONFIG_NET_FC is not set
> CONFIG_RCPCI=m
> CONFIG_SHAPER=m
>
> #
> # Wan interfaces
> #
> CONFIG_HOSTESS_SV11=m
> CONFIG_COSA=m
> CONFIG_SEALEVEL_4021=m
> CONFIG_DLCI=m
> CONFIG_DLCI_COUNT=24
> CONFIG_DLCI_MAX=8
> CONFIG_SDLA=m
> CONFIG_WAN_DRIVERS=y
> CONFIG_VENDOR_SANGOMA=m
> CONFIG_WANPIPE_CARDS=1
> CONFIG_WANPIPE_X25=y
> CONFIG_WANPIPE_FR=y
> CONFIG_WANPIPE_PPP=y
> CONFIG_LAPBETHER=m
> CONFIG_X25_ASY=m
> # CONFIG_SBNI is not set
>
> #
> # Amateur Radio support
> #
> CONFIG_HAMRADIO=y
> CONFIG_AX25=m
> CONFIG_AX25_DAMA_SLAVE=y
> CONFIG_NETROM=m
> CONFIG_ROSE=m
> CONFIG_MKISS=m
> CONFIG_6PACK=m
> CONFIG_BPQETHER=m
> CONFIG_DMASCC=m
> CONFIG_SCC=m
> CONFIG_SCC_DELAY=y
> CONFIG_SCC_TRXECHO=y
> CONFIG_BAYCOM_SER_FDX=m
> CONFIG_BAYCOM_SER_HDX=m
> CONFIG_BAYCOM_PAR=m
> CONFIG_BAYCOM_EPP=m
> CONFIG_SOUNDMODEM=m
> CONFIG_SOUNDMODEM_SBC=y
> CONFIG_SOUNDMODEM_WSS=y
> CONFIG_SOUNDMODEM_AFSK1200=y
> CONFIG_SOUNDMODEM_AFSK2400_7=y
> CONFIG_SOUNDMODEM_AFSK2400_8=y
> CONFIG_SOUNDMODEM_AFSK2666=y
> CONFIG_SOUNDMODEM_HAPN4800=y
> CONFIG_SOUNDMODEM_PSK4800=y
> CONFIG_SOUNDMODEM_FSK9600=y
> CONFIG_YAM=m
> CONFIG_HFMODEM=m
> CONFIG_HFMODEM_SBC=y
> CONFIG_HFMODEM_WSS=y
>
> #
> # IrDA subsystem support
> #
> CONFIG_IRDA=m
> CONFIG_IRLAN=m
> CONFIG_IRCOMM=m
> CONFIG_IRLPT=m
> CONFIG_IRLPT_CLIENT=m
> CONFIG_IRLPT_SERVER=m
> # CONFIG_IRDA_OPTIONS is not set
> # CONFIG_IRDA_COMPRESSION is not set
>
> #
> # Infrared-port device drivers
> #
> CONFIG_IRTTY_SIR=m
> CONFIG_IRPORT_SIR=m
> CONFIG_NSC_FIR=m
> CONFIG_WINBOND_FIR=m
> CONFIG_SHARP_FIR=m
> CONFIG_TOSHIBA_FIR=m
> CONFIG_SMC_IRCC_FIR=m
> CONFIG_DONGLE=y
> CONFIG_ESI_DONGLE=m
> CONFIG_ACTISYS_DONGLE=m
> CONFIG_TEKRAM_DONGLE=m
> CONFIG_GIRBIL_DONGLE=m
> CONFIG_LITELINK_DONGLE=m
>
> #
> # ISDN subsystem
> #
> CONFIG_ISDN=m
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> CONFIG_ISDN_AUDIO=y
> # CONFIG_ISDN_TTY_FAX is not set
> # CONFIG_ISDN_DIVERSION is not set
> CONFIG_ISDN_X25=y
> CONFIG_ISDN_DRV_ICN=m
> CONFIG_ISDN_DRV_LOOP=m
> CONFIG_ISDN_DRV_PCBIT=m
> CONFIG_ISDN_DRV_HISAX=m
> CONFIG_HISAX_EURO=y
> CONFIG_DE_AOC=y
> # CONFIG_HISAX_NO_SENDCOMPLETE is not set
> # CONFIG_HISAX_NO_LLC is not set
> CONFIG_HISAX_1TR6=y
> CONFIG_HISAX_16_0=y
> CONFIG_HISAX_16_3=y
> CONFIG_HISAX_TELESPCI=y
> CONFIG_HISAX_S0BOX=y
> CONFIG_HISAX_AVM_A1=y
> CONFIG_HISAX_FRITZPCI=y
> CONFIG_HISAX_AVM_A1_PCMCIA=y
> CONFIG_HISAX_ELSA=y
> CONFIG_HISAX_IX1MICROR2=y
> CONFIG_HISAX_DIEHLDIVA=y
> CONFIG_HISAX_ASUSCOM=y
> CONFIG_HISAX_TELEINT=y
> CONFIG_HISAX_HFCS=y
> CONFIG_HISAX_SEDLBAUER=y
> CONFIG_HISAX_SPORTSTER=y
> CONFIG_HISAX_MIC=y
> CONFIG_HISAX_NETJET=y
> CONFIG_HISAX_NICCY=y
> CONFIG_HISAX_ISURF=y
> CONFIG_HISAX_HSTSAPHIR=y
> CONFIG_HISAX_BKM_A4T=y
> CONFIG_HISAX_SCT_QUADRO=y
> CONFIG_HISAX_GAZEL=y
> CONFIG_HISAX_HFC_PCI=y
> # CONFIG_HISAX_W6692 is not set
> CONFIG_ISDN_DRV_SC=m
> CONFIG_ISDN_DRV_ACT2000=m
> CONFIG_ISDN_DRV_EICON=m
> # CONFIG_ISDN_DRV_EICON_ISA is not set
> CONFIG_ISDN_DRV_AVMB1=m
> CONFIG_ISDN_DRV_AVMB1_B1ISA=y
> CONFIG_ISDN_DRV_AVMB1_B1PCI=y
> CONFIG_ISDN_DRV_AVMB1_T1ISA=y
> CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=y
> CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> CONFIG_CD_NO_IDESCSI=y
> CONFIG_AZTCD=m
> CONFIG_GSCD=m
> CONFIG_SBPCD=m
> CONFIG_MCD=m
> CONFIG_MCD_IRQ=11
> CONFIG_MCD_BASE=300
> CONFIG_MCDX=m
> CONFIG_OPTCD=m
> CONFIG_CM206=m
> CONFIG_SJCD=m
> CONFIG_ISP16_CDI=m
> CONFIG_CDU31A=m
> CONFIG_CDU535=m
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_SERIAL=y
> CONFIG_SERIAL_CONSOLE=y
> CONFIG_SERIAL_EXTENDED=y
> CONFIG_SERIAL_MANY_PORTS=y
> CONFIG_SERIAL_SHARE_IRQ=y
> # CONFIG_SERIAL_DETECT_IRQ is not set
> CONFIG_SERIAL_MULTIPORT=y
> CONFIG_HUB6=y
> CONFIG_SERIAL_NONSTANDARD=y
> CONFIG_ROCKETPORT=m
> CONFIG_DIGIEPCA=m
> CONFIG_CYCLADES=m
> # CONFIG_CYZ_INTR is not set
> CONFIG_STALDRV=y
> CONFIG_STALLION=m
> CONFIG_ISTALLION=m
> CONFIG_RISCOM8=m
> CONFIG_COMPUTONE=m
> CONFIG_SPECIALIX=m
> # CONFIG_SPECIALIX_RTSCTS is not set
> CONFIG_SX=m
> CONFIG_ESPSERIAL=m
> CONFIG_ISI=m
> CONFIG_SYNCLINK=m
> CONFIG_N_HDLC=m
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=512
> CONFIG_PRINTER=m
> CONFIG_PRINTER_READBACK=y
> CONFIG_MOUSE=y
>
> #
> # Mice
> #
> CONFIG_ATIXL_BUSMOUSE=m
> CONFIG_BUSMOUSE=m
> CONFIG_MS_BUSMOUSE=m
> CONFIG_PSMOUSE=y
> CONFIG_82C710_MOUSE=m
> CONFIG_PC110_PAD=m
> CONFIG_QIC02_TAPE=m
> CONFIG_QIC02_DYNCONF=y
> CONFIG_WATCHDOG=y
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG_NOWAYOUT is not set
> CONFIG_WDT=m
> CONFIG_WDT_501=y
> CONFIG_WDT_501_FAN=y
> CONFIG_SOFT_WATCHDOG=m
> CONFIG_PCWATCHDOG=m
> CONFIG_ACQUIRE_WDT=m
> CONFIG_NVRAM=m
> CONFIG_RTC=y
>
> #
> # Video For Linux
> #
> CONFIG_VIDEO_DEV=m
> CONFIG_RADIO_RTRACK=m
> CONFIG_RADIO_RTRACK2=m
> CONFIG_RADIO_AZTECH=m
> CONFIG_RADIO_CADET=m
> CONFIG_RADIO_MIROPCM20=m
> CONFIG_RADIO_GEMTEK=m
> # CONFIG_RADIO_TRUST is not set
> CONFIG_VIDEO_BT848=m
> CONFIG_VIDEO_BWQCAM=m
> CONFIG_VIDEO_CQCAM=m
> CONFIG_VIDEO_PMS=m
> CONFIG_VIDEO_SAA5249=m
> CONFIG_RADIO_SF16FMI=m
> CONFIG_RADIO_TYPHOON=m
> CONFIG_RADIO_TYPHOON_PROC_FS=y
> CONFIG_RADIO_ZOLTRIX=m
> CONFIG_VIDEO_ZORAN=m
> CONFIG_VIDEO_BUZ=m
>
> #
> # Joystick support
> #
> CONFIG_JOYSTICK=m
> CONFIG_JOY_ANALOG=m
> CONFIG_JOY_ASSASIN=m
> CONFIG_JOY_GRAVIS=m
> CONFIG_JOY_LOGITECH=m
> CONFIG_JOY_SIDEWINDER=m
> CONFIG_JOY_THRUSTMASTER=m
> CONFIG_JOY_LIGHTNING=m
> CONFIG_JOY_CONSOLE=m
> CONFIG_JOY_DB9=m
> CONFIG_JOY_TURBOGRAFX=m
> CONFIG_DTLK=m
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_FTAPE=m
> CONFIG_ZFTAPE=m
> CONFIG_ZFT_DFLT_BLK_SZ=10240
> CONFIG_ZFT_COMPRESSOR=m
> CONFIG_FT_NR_BUFFERS=3
> # CONFIG_FT_PROC_FS is not set
> CONFIG_FT_NORMAL_DEBUG=y
> # CONFIG_FT_FULL_DEBUG is not set
> # CONFIG_FT_NO_TRACE is not set
> # CONFIG_FT_NO_TRACE_AT_ALL is not set
> CONFIG_FT_STD_FDC=y
> # CONFIG_FT_MACH2 is not set
> # CONFIG_FT_PROBE_FC10 is not set
> # CONFIG_FT_ALT_FDC is not set
> CONFIG_FT_FDC_THR=8
> CONFIG_FT_FDC_MAX_RATE=2000
> CONFIG_FT_ALPHA_CLOCK=0
>
> #
> # Filesystems
> #
> CONFIG_QUOTA=y
> CONFIG_AUTOFS_FS=m
> CONFIG_ADFS_FS=m
> CONFIG_AFFS_FS=m
> CONFIG_HFS_FS=m
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_UMSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_MINIX_FS=y
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_RW is not set
> CONFIG_HPFS_FS=m
> CONFIG_PROC_FS=y
> CONFIG_DEVPTS_FS=y
> CONFIG_QNX4FS_FS=m
> # CONFIG_QNX4FS_RW is not set
> CONFIG_ROMFS_FS=m
> CONFIG_EXT2_FS=y
> CONFIG_SYSV_FS=m
> CONFIG_UFS_FS=m
> # CONFIG_UFS_FS_WRITE is not set
> CONFIG_EFS_FS=m
> CONFIG_SGI_PARTITION=y
>
> #
> # Network File Systems
> #
> CONFIG_CODA_FS=m
> CONFIG_NFS_FS=y
> CONFIG_NFSD=m
> # CONFIG_NFSD_SUN is not set
> CONFIG_SUNRPC=y
> CONFIG_LOCKD=y
> CONFIG_SMB_FS=m
> CONFIG_NCP_FS=m
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> CONFIG_NCPFS_STRONG=y
> CONFIG_NCPFS_NFS_NS=y
> CONFIG_NCPFS_OS2_NS=y
> # CONFIG_NCPFS_SMALLDOS is not set
> CONFIG_NCPFS_MOUNT_SUBDIR=y
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
>
> #
> # Partition Types
> #
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MAC_PARTITION=y
> CONFIG_SMD_DISKLABEL=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> CONFIG_AMIGA_PARTITION=y
> CONFIG_NLS=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
>
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_FB=y
> CONFIG_DUMMY_CONSOLE=y
> # CONFIG_FB_PM2 is not set
> CONFIG_FB_VESA=y
> # CONFIG_FB_VGA16 is not set
> CONFIG_VIDEO_SELECT=y
> CONFIG_FB_MATROX=m
> CONFIG_FB_MATROX_MILLENIUM=y
> CONFIG_FB_MATROX_MYSTIQUE=y
> CONFIG_FB_MATROX_G100=y
> CONFIG_FB_MATROX_MULTIHEAD=y
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_VIRTUAL is not set
> CONFIG_FBCON_ADVANCED=y
> CONFIG_FBCON_MFB=m
> CONFIG_FBCON_CFB2=m
> CONFIG_FBCON_CFB4=m
> CONFIG_FBCON_CFB8=y
> CONFIG_FBCON_CFB16=y
> CONFIG_FBCON_CFB24=y
> CONFIG_FBCON_CFB32=y
> # CONFIG_FBCON_AFB is not set
> # CONFIG_FBCON_ILBM is not set
> # CONFIG_FBCON_IPLAN2P2 is not set
> # CONFIG_FBCON_IPLAN2P4 is not set
> # CONFIG_FBCON_IPLAN2P8 is not set
> # CONFIG_FBCON_MAC is not set
> # CONFIG_FBCON_VGA_PLANES is not set
> CONFIG_FBCON_VGA=y
> # CONFIG_FBCON_FONTWIDTH8_ONLY is not set
> CONFIG_FBCON_FONTS=y
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> # CONFIG_FONT_SUN8x16 is not set
> # CONFIG_FONT_SUN12x22 is not set
> # CONFIG_FONT_6x11 is not set
> # CONFIG_FONT_PEARL_8x8 is not set
> # CONFIG_FONT_ACORN_8x8 is not set
>
> #
> # Sound
> #
> CONFIG_SOUND=m
> # CONFIG_SOUND_CMPCI is not set
> CONFIG_SOUND_ES1370=m
> CONFIG_SOUND_ES1371=m
> CONFIG_SOUND_ESSSOLO1=m
> CONFIG_SOUND_SONICVIBES=m
> CONFIG_SOUND_MSNDCLAS=m
> # CONFIG_MSNDCLAS_HAVE_BOOT is not set
> CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
> CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
> CONFIG_SOUND_MSNDPIN=m
> # CONFIG_MSNDPIN_HAVE_BOOT is not set
> CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
> CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
> CONFIG_SOUND_OSS=m
> CONFIG_SOUND_PAS=m
> CONFIG_SOUND_SB=m
> CONFIG_SOUND_ADLIB=m
> CONFIG_SOUND_GUS=m
> # CONFIG_GUS16 is not set
> # CONFIG_GUSMAX is not set
> CONFIG_SOUND_MPU401=m
> CONFIG_SOUND_PSS=m
> # CONFIG_PSS_MIXER is not set
> CONFIG_SOUND_MSS=m
> CONFIG_SOUND_SSCAPE=m
> CONFIG_SOUND_TRIX=m
> # CONFIG_SOUND_VIA82CXXX is not set
> CONFIG_SOUND_MAD16=m
> # CONFIG_MAD16_OLDCARD is not set
> CONFIG_SOUND_WAVEFRONT=m
> CONFIG_SOUND_CS4232=m
> CONFIG_SOUND_OPL3SA2=m
> CONFIG_SOUND_MAUI=m
> CONFIG_SOUND_SGALAXY=m
> CONFIG_SOUND_AD1816=m
> CONFIG_SOUND_OPL3SA1=m
> CONFIG_SOUND_SOFTOSS=m
> CONFIG_SOUND_YM3812=m
> CONFIG_SOUND_VMIDI=m
> CONFIG_SOUND_UART6850=m
> # CONFIG_SOUND_NM256 is not set
>
> #
> # Additional low level sound drivers
> #
> CONFIG_LOWLEVEL_SOUND=y
> CONFIG_ACI_MIXER=m
> CONFIG_AWE32_SYNTH=m
> CONFIG_AEDSP16=m
> CONFIG_AEDSP16_BASE=220
> CONFIG_MPU_BASE=330
> CONFIG_SC6600=y
> CONFIG_SC6600_JOY=y
> CONFIG_SC6600_CDROM=4
> CONFIG_SC6600_CDROMBASE=0
> CONFIG_AEDSP16_SBPRO=y
> CONFIG_AEDSP16_BASE=220
> CONFIG_AEDSP16_SB_IRQ=5
> CONFIG_AEDSP16_SB_DMA=0
> CONFIG_AEDSP16_MPU401=y
> CONFIG_AEDSP16_MPU_IRQ=0
>
> #
> # Kernel hacking
> #
> # CONFIG_MAGIC_SYSRQ is not set
> ============================
>
>
------------------------------
From: "Martin Fitzpatrick" <[EMAIL PROTECTED]>
Subject: Re: lexmark 5700 printer drivers
Date: Thu, 29 Jun 2000 15:36:53 +0100
Unless I'm wrong, you are onto a proverbial loser, my son.
Did they say it's a WinPrinter ? If so, it *really* will only work with
WinDoze - and we're not talking about writing a new driver here. WinPrinters
(and WinModems) actually use WinDoze resources to work. This is because
they're built cheap&durtily with no memory inside them (or something like
that).
I know that some LexMark printers are WinPrinters, not sure if they all
are - check your original docs.
(Sorry to be the bringer of bad news...)
Regards,
Martin.
(These opions are mine and mine alone.)
"JJ" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> Does anyone know anything about printer drivers and more importantly
> anything on this printer.
> The company said tough luck -- this works only in Windoze so I am trying
to
> find some kind of alternate/compatible drivers or some way to build one.
> Thanks,
> Alex
>
>
------------------------------
Subject: Re: Can't Boot from Compiled Kernel (2.2.13)
From: smp root <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.hardware,alt.os.linux.slackware,comp.os.linux.misc
Date: Thu, 29 Jun 2000 07:53:55 -0700
just wondered... where is the kernel you compiled stored???
your lilo.conf says it is at the root of your root partition, is
it actually there????
===========================================================
Got questions? Get answers over the phone at Keen.com.
Up to 100 minutes free!
http://www.keen.com
------------------------------
From: D G <[EMAIL PROTECTED]>
Subject: Re: i810 video card driver support in xfree86 4.0
Date: Thu, 29 Jun 2000 07:29:40 -0700
Dave Breece wrote:
>
> Supposedly, xfree86 4.0 supports Intel's i810 chipset, including
> the i810e board that is in my quantex box. Although it's not listed
> in the x86config card database, you can edit the XF86Config by
> hand.
>
> After getting everything set up, running startx gives me the error:
>
> (II) I810(0): AGPIOC_ACQUIRE failed
>
> Does anyone know how to fix this, or alternately, does anyone
> know where I can look this error up?
Do you have the agpgart module loaded? Do you have a /dev/agpgart
device (or /dev/agpgarti810 (i think) for suse)?
If not, that's probably why you get the error.
--
DG
e-mail is: [EMAIL PROTECTED]
(remove the Z's--they're what I do when I read SPAM!)
------------------------------
From: "news.polito.it" <[EMAIL PROTECTED]>
Subject: SVGA linux drivers
Date: Thu, 29 Jun 2000 17:02:30 +0200
Where can I find drivers for a very old OAK VGA with 512K RAM for linux red
hat 5.1 (perhaps kernel ver. 2.1...)?
I have tried standard SVGA drivers, but they didn't work.
------------------------------
From: [EMAIL PROTECTED] (Michael Garabaldi)
Subject: Dual Boot - 2 Drives
Date: Thu, 29 Jun 2000 15:07:05 GMT
Hi All,
I've seen [EMAIL PROTECTED] post this question in this group, but
didn't see a valid answer to it so I figured I would ask. I have a
computer with two hard drives. Drive C is a WD 30 Gig drive and drive
D is a 8.4 Gig IBM DeskStar. Is it possible for me to install the
newest version of RH on drive D (keeping Win 95 on drive C) and still
be able to dual boot? If more information is needed, just ask, I'll be
glad to answer.
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.setup) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Setup Digest
******************************
