Hi there,
Since my dmesg said to mail this to you I thought it would be a good
idea to do that.
I've installed RedHat Linux and upgraded the kernel to 2.2.5. There is 1
gig of ram on the machine, 2 450 mhz Pentium II processors. Let me know
if you have any questions/suggestions.
Thanks,
Ken
-----Original Message-----
From: root [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 12, 1999 3:06 PM
To: [EMAIL PROTECTED]
Subject: Compaq 1850 SMP dmesg output
See attached
Linux version 2.2.5 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 SMP Mon
Apr 12 13:27:31 PDT 1999
Warning only 960MB will be used.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 448642972 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 447.28 BogoMIPS
Memory: 971616k/983040k available (1008k kernel code, 416k reserved, 9928k data, 72k
init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.14 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 448.6560 MHz.
..... system bus clock speed is 99.7011 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 447.28 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (894.57 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32,
33, 34 not connected.
number of MP IRQ sources: 16.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 0FF 0F 1 1 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 0FF 0F 1 1 0 0 0 1 1 91
0a 0FF 0F 1 1 0 0 0 1 1 99
0b 0FF 0F 1 1 0 0 0 1 1 A1
0c 000 00 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 B1
0f 0FF 0F 1 1 0 0 0 1 1 B9
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0240-0x0247, BIOS settings: hda:pio, hdb:pio
hda: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X CD-ROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.54
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 0, device 6, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6dfcf00, io_port=0x2000, irq=10
ncr53c876-0: NCR clock is 40218KHz, 40037KHz
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6dff000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6dfce00, io_port=0x2400, irq=11
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6dfe000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - revision 3.1h
scsi1 : ncr53c8xx - revision 3.1h
scsi : 2 hosts.
Vendor: SEAGATE Model: ST15150N Rev: 0023
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
ncr53c876-1-<0,0>: tagged command queue depth set to 4
scsi : detected 1 SCSI disk total.
ncr53c876-1-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1 GB]
Compaq SMART2 Driver (v 1.0)
Found 1 controller(s)
Finding drives on ida0 (SMART-3200)
ida/c0d0: blksz=512 nr_blks=17764320
eth0: OEM i82557/i82558 10/100 Ethernet at 0x2c00, 00:08:C7:3B:FC:8F, IRQ 5.
Board assembly 702536-006, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x24c9f043).
Receiver lock-up workaround activated.
TLAN 1.0: eth1 irq=15 io=2c20, Compaq Netelligent Integrated 10/100 TX UTP, Rev. 16
Partition check:
ida/c0d0: p1 p2 p3 p4
sda: sda1 sda2 < sda5 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 127776k swap-space (priority -1)
