Hardware used: Quad Pentium-Pro MMX 200 MHz with 256M bytes RAM Two SCSI drives on motherboard embedded Adaptec SCSI I first installed RH Linux 6.0 on the system. I used Disk Druid to partition the first drive with two partitions: first is a 2G DOS partition and second is 6G non-formated partition. The second drive has the Linux Swap partition (280 MBytes) and Linux Native for the rest of the drive. LILO was on a floppy disk, which meant I had to boot from the floppy. I did not write to the MBR. Linux did not support SMP from the floppy boot. I then installed Windows 2000 Server Beta 3 to the second partition of the first drive. I then rebooted the system off the RH CD-ROM for an update. I did not add any more packages. Rather, the only change I did was to install the bootloader/LILO into the MBR. On my system, I had to set LILO to use linear mode for proper LILO booting. I now have both RH Linux 6.0 with SMP, Windows 2000 Server with SMP on the same system. Initial boot is now always through LILO. Kevin Nelson PS. I did not try to see if I could have installed Windows 2000 first. That may work too... - Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/ To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
