> I've looked over the faq and scoured newsgroups but I can't
> find anything
> quite exactly like what I am experienceing. So if what I
> describe below
> is old hat, then mabe someone should put it in the FAQ.
>
have you lookied in the linux/Documentation directory in the
kernel also?
> On starting the system the bios complains that the new
> processor has some
> instructions it doesn't know. So I upgraded the bios (for
> those interested
> it is now 1008) and turned on the MPS 1.4 support. I boot into
> the old kernel
> and everything is fine, but of course only one processor is
> working. So I
> download the most recent kernel patches from 2.2.5 to 2.2.9
> from kernelnotes
> and apply them to my source tree. Then I make mrproper, make
> xconfig, make dep,
> make bzImage, make modules, make modules_install and install
> the new kernel
> and rerun lilo. I configur the kernel with SMP and the Real
> timer support
> that it asks for in the SMP help, all of the other options I
> leave alone:
> SCSI, sound, networking, etc.
>
well "ass-u-me" that the BIOs is regixstering both CPU's
correctly now. Have you also looked at the stepping? When doing
DUAL SMP in Linux you really should buy both CPU's at the same
time.....
> When I boot into the new kernel OSS complains and fails to
> load (no biggie, i
> sort of expected that) but far more troublesome dip no longer
> runs. Trying to
> diagnose the system I kill the dip job and try to talk to the
> modem with
> minicom. I get no response whatsoever on any of the tty or cua
> devices.
> What happened to my modem?
>
you modem with 2.2 is no longer on any cua device it will
prabably be on ttyS0 or ttyS1... mine is on ttyS2 but I put it
there...
> Booting back into the older (2.2.5) kernel the sound and modem
> work fine.
>
UMP I guess...
> Ok so I figure perhaps it is something about the 2.2.9, so I
> compiled a
> 2.2.9 kernel without SMP (keeping the modules separate). With
> the non-SMP
> kernel the modem works just great (OSS still complains, but
> that is again
> no biggie).
>
have you tried 2.2.5 SMP first? maybe one of the patches did
not apply .. in some Linux distros, the kernel that they
distribute with the distro is not a "stock" kernel. RH does this
often, and Suse supplies both stock and there own. If you
patched a RH 2.2.5 kernel to 2.2.9 then chances are something
may have went wrong in the patches.....
> It appears that SMP modifies the IRQ layout slightly but I
> can't find any
> mention in any documentation about how to work hardware around
> the change.
>
yes.. UMP uses XT-PIC I beleive, where as SMP now has IO-APIC,
I have no idea what the difference is, but in SMP 2.2 the
interrupts are now shared.. you could try the noapic option at
lilo assuming that you are using lilo.... also make sure you
installed your modules, and system map, other wise kernels will
complain.
> So my guess is that my problem is one of either an IRQ or some
> similar conflict
> that is not getting flaged and is either so straightforward or
> so subtle that
> it isn't mentioned in any of the documentation. Am I right?
> Anyone have
> any suggestions or pointers towards documentation that might
> guide me
> throught this. I would really like to use my system SMP but
> dial-up
> networking is absolutely essential.
>
/usr/src/linux/Documentation...
> in the belief that too much information is only marginally
> sufficient
> i've booted back into the stable 2.2.5 kernel, the 2.2.9 no
> SMP kernel, and
> the bothersome 2.2.9 SMP kernel and gathered all the info that
> looked
> like it might help you all see what might be conflicting.
>
> PLEASE HELP!
>
> thanks,
> chris
>
>
> these are listings of
> dmesg
> cat /proc/cpuinfo
> cat /proc/interrupts
> cat /proc/devices
> cat /proc/ioports
> cat /proc/modules
> cat /proc/pci
> cat /proc/tty/drivers
>
> for each of the kernels that i describe
> ---------stable.config----------------------
>
> Linux version 2.2.5 (root@narya) (gcc version 2.7.2.3) #1 Thu
> Apr 29 19:52:23 MST 1999
> Detected 350802444 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 349.80 BogoMIPS
> Memory: 193064k/196544k available (880k kernel code, 408k
> reserved, 2136k data, 56k init)
> CPU: Intel Pentium II (Deschutes) stepping 02
> Checking 386/387 coupling... OK, FPU using exception 16 error
> reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED])
> PCI: PCI BIOS revision 2.10 entry at 0xf0730
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.09
> loop: registered device at major 7
> PIIX4: IDE controller on PCI bus 00 dev 21
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA,
> hdb:DMA
> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA,
> hdd:pio
> hda: ST36531A, ATA DISK drive
> hdb: TOSHIBA CD-ROM XM-6302B, ATAPI CDROM drive
> hdc: ST36531A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63, UDMA
> hdc: ST36531A, 6204MB w/128kB Cache, CHS=13446/15/63, UDMA
> hdb: ATAPI 32X CD-ROM drive, 256kB Cache
> Uniform CDROM driver Revision: 2.54
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> (scsi0) <Adaptec AIC-7890/1 Ultra2 SCSI host adapter> found at
> PCI 6/0
> (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
> (scsi0) Downloading sequencer code... 407 instructions
> downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI)
> 5.1.10/3.2.4
> <Adaptec AIC-7890/1 Ultra2 SCSI host adapter>
> scsi : 1 host.
> scsi : detected total.
> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
> max=256).
> CSLIP: code copyright 1989 Regents of the University of
> California.
> SLIP linefill/keepalive option.
> Partition check:
> hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete
> Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
> hda1 hda2 hda3
> hdc:hdc: set_multmode: status=0x51 { DriveReady SeekComplete
> Error }
> hdc: set_multmode: error=0x04 { DriveStatusError }
> hdc1
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 56k freed
> Adding Swap: 72288k swap-space (priority -1)
> cat uses obsolete /proc/pci interface
> Use of setserial/setrocket to set SPD_* flags is deprecated
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 5
> model name : Pentium II (Deschutes)
> stepping : 2
> cpu MHz : 350.802444
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> sep_bug : no
> f00f_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 mmx osfxsr
> bogomips : 349.80
>
> CPU0
> 0: 18232 XT-PIC timer
> 1: 561 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 4: 382 XT-PIC serial
> 5: 452 XT-PIC soundblaster
> 8: 1 XT-PIC rtc
> 10: 30 XT-PIC aic7xxx
> 12: 4458 XT-PIC PS/2 Mouse
> 13: 1 XT-PIC fpu
> 14: 4153 XT-PIC ide0
> 15: 1571 XT-PIC ide1
> NMI: 0
> Character devices:
> 1 mem
> 2 pty
> 3 ttyp
> 4 ttyS
> 5 cua
> 7 vcs
> 10 misc
> 14 OSS
>
> Block devices:
> 2 fd
> 3 ide0
> 7 loop
> 22 ide1
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 020b-020b : PnP read port
> 0220-022f : soundblaster
> 02f8-02ff : serial(auto)
> 0330-0333 : MPU-401 UART
> 0376-0376 : ide1
> 0388-038b : OPL3/OPL2
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(set)
> d000-d0be : aic7xxx
> d800-d807 : ide0
> d808-d80f : ide1
> pnp 45748 3
> emu8k 38600 3
> opl3 13228 3
> sb 31980 3
> uart401 6740 3 [sb]
> midi 27528 3 [pnp emu8k opl3 sb uart401]
> soundbase 480152 3 [pnp emu8k opl3 sb uart401
> midi]
> sndshield 4732 0 [pnp emu8k opl3 sb uart401
> midi soundbase]
> msdos 7704 1 (autoclean)
> fat 23904 1 (autoclean) [msdos]
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Intel 440BX - 82443BX Host (rev 2).
> Medium devsel. Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe4000000 [0xe4000008].
> Bus 0, device 1, function 0:
> PCI bridge: Intel 440BX - 82443BX AGP (rev 2).
> Medium devsel. Master Capable. Latency=64. Min
> Gnt=136.
> Bus 0, device 4, function 0:
> ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
> Medium devsel. Fast back-to-back capable. Master
> Capable. No bursts.
> Bus 0, device 4, function 1:
> IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
> Medium devsel. Fast back-to-back capable. Master
> Capable. Latency=32.
> I/O at 0xd800 [0xd801].
> Bus 0, device 4, function 2:
> USB Controller: Intel 82371AB PIIX4 USB (rev 1).
> Medium devsel. Fast back-to-back capable. IRQ 10.
> Master Capable. Latency=32.
> I/O at 0xd400 [0xd401].
> Bus 0, device 4, function 3:
> Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
> Medium devsel. Fast back-to-back capable.
> Bus 0, device 6, function 0:
> SCSI storage controller: Adaptec AIC-7890/1 (rev 0).
> Medium devsel. Fast back-to-back capable. BIST
> capable. IRQ 10. Master Capable. Latency=32. Min
> Gnt=39.Max Lat=25.
> I/O at 0xd000 [0xd001].
> Non-prefetchable 64 bit memory at 0xe1000000
> [0xe1000004].
> Bus 1, device 0, function 0:
> VGA compatible controller: Matrox Millennium II AGP (rev
> 0).
> Medium devsel. Fast back-to-back capable. IRQ 11.
> Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe3000000 [0xe3000008].
> Non-prefetchable 32 bit memory at 0xe2000000
> [0xe2000000].
> Non-prefetchable 32 bit memory at 0xe1800000
> [0xe1800000].
> pty_slave /dev/ttyp 3 0-255 pty:slave
> pty_master /dev/pty 2 0-255 pty:master
> serial /dev/cua 5 64-67 serial:callout
> serial /dev/ttyS 4 64-67 serial
> /dev/tty0 /dev/tty0 4 0 system:vtmaster
> /dev/console /dev/console 5 1 system:console
> /dev/tty /dev/tty 5 0 system:/dev/tty
> unknown /dev/tty 4 1-63 console
>
>
>
>
> ---------noSMP.config----------------------
>
> Linux version 2.2.9 (root@narya) (gcc version 2.7.2.3) #1 Tue
> Jun 15 09:29:40 MST 1999
> Detected 350800754 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 349.80 BogoMIPS
> Memory: 193244k/196544k available (720k kernel code, 412k
> reserved, 2132k data, 36k init)
> CPU: Intel Pentium II (Deschutes) stepping 02
> Checking 386/387 coupling... OK, FPU using exception 16 error
> reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.34 (19990310) Richard Gooch ([EMAIL PROTECTED])
> PCI: PCI BIOS revision 2.10 entry at 0xf0730
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.09
> loop: registered device at major 7
> PIIX4: IDE controller on PCI bus 00 dev 21
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA,
> hdb:DMA
> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA,
> hdd:pio
> hda: ST36531A, ATA DISK drive
> hdb: TOSHIBA CD-ROM XM-6302B, ATAPI CDROM drive
> hdc: ST36531A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63, UDMA
> hdc: ST36531A, 6204MB w/128kB Cache, CHS=13446/15/63, UDMA
> hdb: ATAPI 32X CD-ROM drive, 256kB Cache
> Uniform CDROM driver Revision: 2.55
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
> max=256).
> CSLIP: code copyright 1989 Regents of the University of
> California.
> SLIP linefill/keepalive option.
> Partition check:
> hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete
> Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
> hda1 hda2 hda3
> hdc:hdc: set_multmode: status=0x51 { DriveReady SeekComplete
> Error }
> hdc: set_multmode: error=0x04 { DriveStatusError }
> hdc1
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 36k freed
> Adding Swap: 72288k swap-space (priority -1)
> Use of setserial/setrocket to set SPD_* flags is deprecated
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 5
> model name : Pentium II (Deschutes)
> stepping : 2
> cpu MHz : 350.800754
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> sep_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 mmx osfxsr
> bogomips : 349.80
>
> CPU0
> 0: 15571 XT-PIC timer
> 1: 676 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 4: 380 XT-PIC serial
> 8: 1 XT-PIC rtc
> 12: 1395 XT-PIC PS/2 Mouse
> 13: 1 XT-PIC fpu
> 14: 3373 XT-PIC ide0
> 15: 1566 XT-PIC ide1
> NMI: 0
> Character devices:
> 1 mem
> 2 pty
> 3 ttyp
> 4 ttyS
> 5 cua
> 7 vcs
> 10 misc
>
> Block devices:
> 2 fd
> 3 ide0
> 7 loop
> 22 ide1
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(set)
> d800-d807 : ide0
> d808-d80f : ide1
> msdos 6196 1 (autoclean)
> fat 23912 1 (autoclean) [msdos]
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Intel 440BX - 82443BX Host (rev 2).
> Medium devsel. Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe4000000 [0xe4000008].
> Bus 0, device 1, function 0:
> PCI bridge: Intel 440BX - 82443BX AGP (rev 2).
> Medium devsel. Master Capable. Latency=64. Min
> Gnt=136.
> Bus 0, device 4, function 0:
> ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
> Medium devsel. Fast back-to-back capable. Master
> Capable. No bursts.
> Bus 0, device 4, function 1:
> IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
> Medium devsel. Fast back-to-back capable. Master
> Capable. Latency=32.
> I/O at 0xd800 [0xd801].
> Bus 0, device 4, function 2:
> USB Controller: Intel 82371AB PIIX4 USB (rev 1).
> Medium devsel. Fast back-to-back capable. IRQ 10.
> Master Capable. Latency=32.
> I/O at 0xd400 [0xd401].
> Bus 0, device 4, function 3:
> Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
> Medium devsel. Fast back-to-back capable.
> Bus 0, device 6, function 0:
> SCSI storage controller: Adaptec AIC-7890/1 (rev 0).
> Medium devsel. Fast back-to-back capable. BIST
> capable. IRQ 10. Master Capable. Latency=32. Min
> Gnt=39.Max Lat=25.
> I/O at 0xd000 [0xd001].
> Non-prefetchable 64 bit memory at 0xe1000000
> [0xe1000004].
> Bus 1, device 0, function 0:
> VGA compatible controller: Matrox Millennium II AGP (rev
> 0).
> Medium devsel. Fast back-to-back capable. IRQ 11.
> Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe3000000 [0xe3000008].
> Non-prefetchable 32 bit memory at 0xe2000000
> [0xe2000000].
> Non-prefetchable 32 bit memory at 0xe1800000
> [0xe1800000].
> pty_slave /dev/ttyp 3 0-255 pty:slave
> pty_master /dev/pty 2 0-255 pty:master
> serial /dev/cua 5 64-67 serial:callout
> serial /dev/ttyS 4 64-67 serial
> /dev/tty0 /dev/tty0 4 0 system:vtmaster
> /dev/console /dev/console 5 1 system:console
> /dev/tty /dev/tty 5 0 system:/dev/tty
> unknown /dev/tty 4 1-63 console
>
> ------------SMP.config------------------
>
> Linux version 2.2.9 (root@narya) (gcc version 2.7.2.3) #1 SMP
> Tue Jun 15 08:56:37 MST 1999
> Intel MultiProcessor Specification v1.4
> Virtual Wire compatibility mode.
> OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
> Processor #1 Pentium(tm) Pro APIC version 17
> Processor #0 Pentium(tm) Pro APIC version 17
> I/O APIC #2 Version 17 at 0xFEC00000.
> Processors: 2
> mapped APIC to ffffe000 (fee00000)
> mapped IOAPIC to ffffd000 (fec00000)
> Detected 350802244 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 349.80 BogoMIPS
> Memory: 193136k/196544k available (764k kernel code, 420k
> reserved, 2176k data, 48k init)
> Checking 386/387 coupling... OK, FPU using exception 16 error
> reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.34 (19990310) Richard Gooch ([EMAIL PROTECTED])
> per-CPU timeslice cutoff: 100.22 usecs.
> CPU1: Intel Pentium II (Deschutes) stepping 02
> calibrating APIC timer ...
> ..... CPU clock speed is 350.8033 MHz.
> ..... system bus clock speed is 100.2294 MHz.
> Booting processor 0 eip 2000
> Calibrating delay loop... 350.62 BogoMIPS
> OK.
> CPU0: Intel Pentium II (Deschutes) stepping 01
> Total of 2 processors activated (700.42 BogoMIPS).
> enabling symmetric IO mode... ...done.
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC pin 0, 10, 11, 13, 17, 18, 20, 21, 22, 23 not
> connected.
> number of MP IRQ sources: 16.
> number of IO-APIC registers: 24.
> testing the IO APIC.......................
> .... register #00: 02000000
> ....... : physical APIC id: 02
> .... register #01: 00170011
> ....... : max redirection entries: 0017
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 000 00 0 0 0 0 0 1 1 59
> 02 0FF 0F 0 0 0 0 0 1 1 51
> 03 000 00 0 0 0 0 0 1 1 61
> 04 000 00 0 0 0 0 0 1 1 69
> 05 000 00 0 0 0 0 0 1 1 71
> 06 000 00 0 0 0 0 0 1 1 79
> 07 000 00 0 0 0 0 0 1 1 81
> 08 000 00 0 0 0 0 0 1 1 89
> 09 000 00 0 0 0 0 0 1 1 91
> 0a 000 00 1 0 0 0 0 0 0 00
> 0b 000 00 1 0 0 0 0 0 0 00
> 0c 000 00 0 0 0 0 0 1 1 99
> 0d 000 00 1 0 0 0 0 0 0 00
> 0e 000 00 0 0 0 0 0 1 1 A1
> 0f 000 00 0 0 0 0 0 1 1 A9
> 10 0FF 0F 1 1 0 1 0 1 1 B1
> 11 000 00 1 0 0 0 0 0 0 00
> 12 000 00 1 0 0 0 0 0 0 00
> 13 0FF 0F 1 1 0 1 0 1 1 B9
> 14 000 00 1 0 0 0 0 0 0 00
> 15 000 00 1 0 0 0 0 0 0 00
> 16 000 00 1 0 0 0 0 0 0 00
> 17 000 00 1 0 0 0 0 0 0 00
> IRQ to pin mappings:
> IRQ0 -> 2
> IRQ1 -> 1
> IRQ3 -> 3
> IRQ4 -> 4
> IRQ5 -> 5
> IRQ6 -> 6
> IRQ7 -> 7
> IRQ8 -> 8
> IRQ9 -> 9
> IRQ12 -> 12
> IRQ14 -> 14
> IRQ15 -> 15
> IRQ16 -> 16
> IRQ19 -> 19
> .................................... done.
> PCI: PCI BIOS revision 2.10 entry at 0xf0730
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> PCI->APIC IRQ transform: (B0,I4,P3) -> 19
> PCI->APIC IRQ transform: (B0,I6,P0) -> 19
> PCI->APIC IRQ transform: (B1,I0,P0) -> 16
> Linux NET4.0 for Linux 2.2
> Based upon Swansea University Computer Society NET3.039
> NET4: Unix domain sockets 1.0 for Linux NET4.0.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> Starting kswapd v 1.5
> Detected PS/2 Mouse Port.
> Serial driver version 4.27 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.09
> loop: registered device at major 7
> PIIX4: IDE controller on PCI bus 00 dev 21
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA,
> hdb:DMA
> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA,
> hdd:pio
> hda: ST36531A, ATA DISK drive
> hdb: TOSHIBA CD-ROM XM-6302B, ATAPI CDROM drive
> hdc: ST36531A, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63, UDMA
> hdc: ST36531A, 6204MB w/128kB Cache, CHS=13446/15/63, UDMA
> hdb: ATAPI 32X CD-ROM drive, 256kB Cache
> Uniform CDROM driver Revision: 2.55
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
> max=256).
> CSLIP: code copyright 1989 Regents of the University of
> California.
> SLIP linefill/keepalive option.
> Partition check:
> hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete
> Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
> hda1 hda2 hda3
> hdc:hdc: set_multmode: status=0x51 { DriveReady SeekComplete
> Error }
> hdc: set_multmode: error=0x04 { DriveStatusError }
> hdc1
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 48k freed
> Adding Swap: 72288k swap-space (priority -1)
> Use of setserial/setrocket to set SPD_* flags is deprecated
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 5
> model name : Pentium II (Deschutes)
> stepping : 1
> cpu MHz : 350.802244
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> sep_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 mmx osfxsr
> bogomips : 350.62
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 6
> model : 5
> model name : Pentium II (Deschutes)
> stepping : 2
> cpu MHz : 350.802244
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> sep_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 mmx osfxsr
> bogomips : 349.80
>
> CPU0 CPU1
> 0: 49876 49719 IO-APIC-edge timer
> 1: 622 561 IO-APIC-edge keyboard
> 2: 0 0 XT-PIC cascade
> 4: 2 4 IO-APIC-edge serial
> 8: 0 1 IO-APIC-edge rtc
> 12: 3861 3631 IO-APIC-edge PS/2 Mouse
> 13: 1 0 XT-PIC fpu
> 14: 2196 1702 IO-APIC-edge ide0
> 15: 1363 205 IO-APIC-edge ide1
> NMI: 0
> ERR: 0
> Character devices:
> 1 mem
> 2 pty
> 3 ttyp
> 4 ttyS
> 5 cua
> 7 vcs
> 10 misc
>
> Block devices:
> 2 fd
> 3 ide0
> 7 loop
> 22 ide1
> 4: cascade
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial(auto)
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial(set)
> d800-d807 : ide0
> d808-d80f : ide1
> msdos 6204 1 (autoclean)
> fat 23912 1 (autoclean) [msdos]
> PCI devices found:
> Bus 0, device 0, function 0:
> Host bridge: Intel 440BX - 82443BX Host (rev 2).
> Medium devsel. Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe4000000 [0xe4000008].
> Bus 0, device 1, function 0:
> PCI bridge: Intel 440BX - 82443BX AGP (rev 2).
> Medium devsel. Master Capable. Latency=64. Min
> Gnt=136.
> Bus 0, device 4, function 0:
> ISA bridge: Intel 82371AB PIIX4 ISA (rev 2).
> Medium devsel. Fast back-to-back capable. Master
> Capable. No bursts.
> Bus 0, device 4, function 1:
> IDE interface: Intel 82371AB PIIX4 IDE (rev 1).
> Medium devsel. Fast back-to-back capable. Master
> Capable. Latency=32.
> I/O at 0xd800 [0xd801].
> Bus 0, device 4, function 2:
> USB Controller: Intel 82371AB PIIX4 USB (rev 1).
> Medium devsel. Fast back-to-back capable. IRQ 19.
> Master Capable. Latency=32.
> I/O at 0xd400 [0xd401].
> Bus 0, device 4, function 3:
> Bridge: Intel 82371AB PIIX4 ACPI (rev 2).
> Medium devsel. Fast back-to-back capable.
> Bus 0, device 6, function 0:
> SCSI storage controller: Adaptec AIC-7890/1 (rev 0).
> Medium devsel. Fast back-to-back capable. BIST
> capable. IRQ 19. Master Capable. Latency=32. Min
> Gnt=39.Max Lat=25.
> I/O at 0xd000 [0xd001].
> Non-prefetchable 64 bit memory at 0xe1000000
> [0xe1000004].
> Bus 1, device 0, function 0:
> VGA compatible controller: Matrox Millennium II AGP (rev
> 0).
> Medium devsel. Fast back-to-back capable. IRQ 16.
> Master Capable. Latency=64.
> Prefetchable 32 bit memory at 0xe3000000 [0xe3000008].
> Non-prefetchable 32 bit memory at 0xe2000000
> [0xe2000000].
> Non-prefetchable 32 bit memory at 0xe1800000
> [0xe1800000].
> pty_slave /dev/ttyp 3 0-255 pty:slave
> pty_master /dev/pty 2 0-255 pty:master
> serial /dev/cua 5 64-67 serial:callout
> serial /dev/ttyS 4 64-67 serial
> /dev/tty0 /dev/tty0 4 0 system:vtmaster
> /dev/console /dev/console 5 1 system:console
> /dev/tty /dev/tty 5 0 system:/dev/tty
> unknown /dev/tty 4 1-63 console
>
>
>
>
>
>
>
>
>
>
> Who are you? What do you want? Why are you here?
> .... Where are you going?
> ------------------------ Chris Gottbrath
> ------------------------
> http://agave.as.arizona.edu/~chrisg/
> [EMAIL PROTECTED]
>
> -
> Linux SMP list: FIRST see FAQ at
> http://www.irisa.fr/prive/mentre/smp-faq/
> To Unsubscribe: send "unsubscribe linux-smp" to
> [EMAIL PROTECTED]
>
>
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
